diff -burN linux-2.6.20.4/arch/arm/configs/edb9301_defconfig linux/arch/arm/configs/edb9301_defconfig
--- linux-2.6.20.4/arch/arm/configs/edb9301_defconfig	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/configs/edb9301_defconfig	2007-04-24 10:15:52.000000000 +0800
@@ -0,0 +1,1270 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20.4
+# Mon Apr 23 16:29:35 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+CONFIG_ARCH_EP93XX=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Cirrus EP93xx Implementation Options
+#
+CONFIG_CRUNCH=y
+
+#
+# EP93xx Platforms
+#
+# CONFIG_MACH_ADSSPHERE is not set
+CONFIG_MACH_EDB9301=y
+# CONFIG_MACH_EDB9302 is not set
+# CONFIG_MACH_EDB9302A is not set
+# CONFIG_MACH_EDB9307 is not set
+# CONFIG_MACH_EDB9307A is not set
+# CONFIG_MACH_EDB9312 is not set
+# CONFIG_MACH_EDB9315 is not set
+# CONFIG_MACH_EDB9315A is not set
+# CONFIG_MACH_GESBC9312 is not set
+# CONFIG_MACH_TS72XX is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_ARM_VIC=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/ram"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=m
+# CONFIG_NFTL_RW is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_EDB93XX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_EDB93xx=m
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=8096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_EP93XX_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_AMBAKMI is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+# CONFIG_SERIAL_AMBA_PL011 is not set
+# CONFIG_SERIAL_EP93XX is not set
+# CONFIG_EP93XX_SERIAL_FLASH is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_EP93XX_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+CONFIG_TIFM_CORE=m
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_EP93XX_IIS=y
+CONFIG_CODEC_CS4271=y
+# CONFIG_SND_EP93XX_AC97 is not set
+# CONFIG_SND_ARMAACI is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff -burN linux-2.6.20.4/arch/arm/configs/edb9302a_defconfig linux/arch/arm/configs/edb9302a_defconfig
--- linux-2.6.20.4/arch/arm/configs/edb9302a_defconfig	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/configs/edb9302a_defconfig	2007-04-24 10:16:37.000000000 +0800
@@ -0,0 +1,1350 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20.4
+# Mon Apr 23 15:33:25 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+CONFIG_ARCH_EP93XX=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Cirrus EP93xx Implementation Options
+#
+CONFIG_CRUNCH=y
+
+#
+# EP93xx Platforms
+#
+# CONFIG_MACH_ADSSPHERE is not set
+# CONFIG_MACH_EDB9301 is not set
+# CONFIG_MACH_EDB9302 is not set
+CONFIG_MACH_EDB9302A=y
+# CONFIG_MACH_EDB9307 is not set
+# CONFIG_MACH_EDB9307A is not set
+# CONFIG_MACH_EDB9312 is not set
+# CONFIG_MACH_EDB9315 is not set
+# CONFIG_MACH_EDB9315A is not set
+# CONFIG_MACH_GESBC9312 is not set
+# CONFIG_MACH_TS72XX is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_ARM_VIC=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/ram"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=m
+# CONFIG_NFTL_RW is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_EDB93XX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_EDB93xx=m
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=8096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_EP93XX_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_AMBAKMI is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+# CONFIG_SERIAL_AMBA_PL011 is not set
+# CONFIG_SERIAL_EP93XX is not set
+# CONFIG_EP93XX_SERIAL_FLASH is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_EP93XX_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_EP93XX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+CONFIG_TIFM_CORE=m
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_EP93XX_IIS=y
+CONFIG_CODEC_CS4271=y
+# CONFIG_SND_EP93XX_AC97 is not set
+# CONFIG_SND_ARMAACI is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_EP931X=y
+CONFIG_USB_EP931X=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+CONFIG_RTC_DRV_ISL1208=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_EP93XX is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff -burN linux-2.6.20.4/arch/arm/configs/edb9302_defconfig linux/arch/arm/configs/edb9302_defconfig
--- linux-2.6.20.4/arch/arm/configs/edb9302_defconfig	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/configs/edb9302_defconfig	2007-04-24 10:16:04.000000000 +0800
@@ -0,0 +1,1270 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20.4
+# Mon Apr 23 15:58:41 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+CONFIG_ARCH_EP93XX=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Cirrus EP93xx Implementation Options
+#
+CONFIG_CRUNCH=y
+
+#
+# EP93xx Platforms
+#
+# CONFIG_MACH_ADSSPHERE is not set
+# CONFIG_MACH_EDB9301 is not set
+CONFIG_MACH_EDB9302=y
+# CONFIG_MACH_EDB9302A is not set
+# CONFIG_MACH_EDB9307 is not set
+# CONFIG_MACH_EDB9307A is not set
+# CONFIG_MACH_EDB9312 is not set
+# CONFIG_MACH_EDB9315 is not set
+# CONFIG_MACH_EDB9315A is not set
+# CONFIG_MACH_GESBC9312 is not set
+# CONFIG_MACH_TS72XX is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_ARM_VIC=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/ram"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=m
+# CONFIG_NFTL_RW is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_EDB93XX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_EDB93xx=m
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=8096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_EP93XX_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_AMBAKMI is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+# CONFIG_SERIAL_AMBA_PL011 is not set
+# CONFIG_SERIAL_EP93XX is not set
+# CONFIG_EP93XX_SERIAL_FLASH is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_EP93XX_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+CONFIG_TIFM_CORE=m
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_EP93XX_IIS=y
+CONFIG_CODEC_CS4271=y
+# CONFIG_SND_EP93XX_AC97 is not set
+# CONFIG_SND_ARMAACI is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff -burN linux-2.6.20.4/arch/arm/configs/edb9307a_defconfig linux/arch/arm/configs/edb9307a_defconfig
--- linux-2.6.20.4/arch/arm/configs/edb9307a_defconfig	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/configs/edb9307a_defconfig	2007-04-24 10:20:51.000000000 +0800
@@ -0,0 +1,1415 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20.4
+# Tue Apr 24 10:20:38 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+CONFIG_ARCH_EP93XX=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Cirrus EP93xx Implementation Options
+#
+CONFIG_CRUNCH=y
+
+#
+# EP93xx Platforms
+#
+# CONFIG_MACH_ADSSPHERE is not set
+# CONFIG_MACH_EDB9301 is not set
+# CONFIG_MACH_EDB9302 is not set
+# CONFIG_MACH_EDB9302A is not set
+# CONFIG_MACH_EDB9307 is not set
+CONFIG_MACH_EDB9307A=y
+# CONFIG_MACH_EDB9312 is not set
+# CONFIG_MACH_EDB9315 is not set
+# CONFIG_MACH_EDB9315A is not set
+# CONFIG_MACH_GESBC9312 is not set
+# CONFIG_MACH_TS72XX is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_ARM_VIC=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/ram"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=m
+# CONFIG_NFTL_RW is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_EDB93XX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_EDB93xx=m
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=8096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_EP93XX_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+CONFIG_SLIP=y
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=y
+# CONFIG_SLIP_SMART is not set
+# CONFIG_SLIP_MODE_SLIP6 is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_EP93XX_SPI is not set
+# CONFIG_KEYBOARD_EP93XX_KEYPAD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_TOUCHSCREEN_EP93XX=y
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_AMBAKMI is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+# CONFIG_SERIAL_AMBA_PL011 is not set
+# CONFIG_SERIAL_EP93XX is not set
+# CONFIG_EP93XX_SERIAL_FLASH is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_EP93XX_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_EP93XX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+CONFIG_TIFM_CORE=m
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_EP93XX=y
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_EP93XX_IIS=y
+CONFIG_CODEC_CS4271=y
+# CONFIG_SND_EP93XX_AC97 is not set
+# CONFIG_SND_ARMAACI is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_EP931X=y
+CONFIG_USB_EP931X=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+CONFIG_RTC_DRV_ISL1208=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_EP93XX is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff -burN linux-2.6.20.4/arch/arm/configs/edb9307_defconfig linux/arch/arm/configs/edb9307_defconfig
--- linux-2.6.20.4/arch/arm/configs/edb9307_defconfig	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/configs/edb9307_defconfig	2007-04-24 10:16:49.000000000 +0800
@@ -0,0 +1,1390 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20.4
+# Mon Apr 23 12:11:36 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+CONFIG_ARCH_EP93XX=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Cirrus EP93xx Implementation Options
+#
+CONFIG_CRUNCH=y
+
+#
+# EP93xx Platforms
+#
+# CONFIG_MACH_ADSSPHERE is not set
+# CONFIG_MACH_EDB9301 is not set
+# CONFIG_MACH_EDB9302 is not set
+# CONFIG_MACH_EDB9302A is not set
+CONFIG_MACH_EDB9307=y
+# CONFIG_MACH_EDB9307A is not set
+# CONFIG_MACH_EDB9312 is not set
+# CONFIG_MACH_EDB9315 is not set
+# CONFIG_MACH_EDB9315A is not set
+# CONFIG_MACH_GESBC9312 is not set
+# CONFIG_MACH_TS72XX is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_ARM_VIC=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/ram"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=y
+CONFIG_IRCOMM=y
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=y
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_EP93XX_SIR=y
+# CONFIG_ESI_DONGLE is not set
+# CONFIG_ACTISYS_DONGLE is not set
+# CONFIG_TEKRAM_DONGLE is not set
+# CONFIG_TOIM3232_DONGLE is not set
+# CONFIG_LITELINK_DONGLE is not set
+# CONFIG_MA600_DONGLE is not set
+# CONFIG_GIRBIL_DONGLE is not set
+# CONFIG_MCP2120_DONGLE is not set
+# CONFIG_OLD_BELKIN_DONGLE is not set
+# CONFIG_ACT200L_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=m
+# CONFIG_NFTL_RW is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_EDB93XX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_EDB93xx=m
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=8096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_EP93XX_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+CONFIG_SLIP=y
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=y
+# CONFIG_SLIP_SMART is not set
+# CONFIG_SLIP_MODE_SLIP6 is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_EP93XX_SPI=y
+# CONFIG_KEYBOARD_EP93XX_KEYPAD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_TOUCHSCREEN_EP93XX=y
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_AMBAKMI is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+# CONFIG_SERIAL_AMBA_PL011 is not set
+# CONFIG_SERIAL_EP93XX is not set
+# CONFIG_EP93XX_SERIAL_FLASH is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_EP93XX_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+CONFIG_TIFM_CORE=m
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_EP93XX=y
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_EP93XX_IIS=y
+CONFIG_CODEC_CS4228A=y
+# CONFIG_SND_EP93XX_AC97 is not set
+# CONFIG_SND_ARMAACI is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff -burN linux-2.6.20.4/arch/arm/configs/edb9312_defconfig linux/arch/arm/configs/edb9312_defconfig
--- linux-2.6.20.4/arch/arm/configs/edb9312_defconfig	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/configs/edb9312_defconfig	2007-04-24 10:17:34.000000000 +0800
@@ -0,0 +1,1446 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20.4
+# Thu Apr 19 14:35:11 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+CONFIG_ARCH_EP93XX=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Cirrus EP93xx Implementation Options
+#
+CONFIG_CRUNCH=y
+
+#
+# EP93xx Platforms
+#
+# CONFIG_MACH_ADSSPHERE is not set
+# CONFIG_MACH_EDB9302 is not set
+# CONFIG_MACH_EDB9302A is not set
+CONFIG_MACH_EDB9312=y
+# CONFIG_MACH_EDB9315 is not set
+# CONFIG_MACH_EDB9315A is not set
+# CONFIG_MACH_GESBC9312 is not set
+# CONFIG_MACH_TS72XX is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_ARM_VIC=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/ram"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=y
+CONFIG_IRCOMM=y
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=y
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_EP93XX_SIR=y
+# CONFIG_ESI_DONGLE is not set
+# CONFIG_ACTISYS_DONGLE is not set
+# CONFIG_TEKRAM_DONGLE is not set
+# CONFIG_TOIM3232_DONGLE is not set
+# CONFIG_LITELINK_DONGLE is not set
+# CONFIG_MA600_DONGLE is not set
+# CONFIG_GIRBIL_DONGLE is not set
+# CONFIG_MCP2120_DONGLE is not set
+# CONFIG_OLD_BELKIN_DONGLE is not set
+# CONFIG_ACT200L_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=m
+# CONFIG_NFTL_RW is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_EDB93XX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_EDB93xx=m
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=8096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+CONFIG_IDE_TASK_IOCTL=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDE_EP93XX=y
+CONFIG_BLK_DEV_IDE_DMA_EP93XX=y
+CONFIG_IDE_ARM=y
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_EP93XX_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+CONFIG_SLIP=y
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=y
+# CONFIG_SLIP_SMART is not set
+# CONFIG_SLIP_MODE_SLIP6 is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_EP93XX_SPI=y
+# CONFIG_KEYBOARD_EP93XX_KEYPAD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_TOUCHSCREEN_EP93XX=y
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_AMBAKMI is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+# CONFIG_SERIAL_AMBA_PL011 is not set
+# CONFIG_SERIAL_EP93XX is not set
+# CONFIG_EP93XX_SERIAL_FLASH is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_EP93XX_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_EP93XX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+CONFIG_TIFM_CORE=m
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_EP93XX=y
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_EP93XX_IIS=y
+CONFIG_CODEC_CS4228A=y
+# CONFIG_SND_EP93XX_AC97 is not set
+# CONFIG_SND_ARMAACI is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff -burN linux-2.6.20.4/arch/arm/configs/edb9315a_defconfig linux/arch/arm/configs/edb9315a_defconfig
--- linux-2.6.20.4/arch/arm/configs/edb9315a_defconfig	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/configs/edb9315a_defconfig	2007-04-24 10:17:55.000000000 +0800
@@ -0,0 +1,1438 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20.4
+# Fri Apr 20 10:34:53 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+CONFIG_ARCH_EP93XX=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Cirrus EP93xx Implementation Options
+#
+CONFIG_CRUNCH=y
+
+#
+# EP93xx Platforms
+#
+# CONFIG_MACH_ADSSPHERE is not set
+# CONFIG_MACH_EDB9302 is not set
+# CONFIG_MACH_EDB9302A is not set
+# CONFIG_MACH_EDB9312 is not set
+# CONFIG_MACH_EDB9315 is not set
+CONFIG_MACH_EDB9315A=y
+# CONFIG_MACH_GESBC9312 is not set
+# CONFIG_MACH_TS72XX is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_ARM_VIC=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/ram"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=m
+# CONFIG_NFTL_RW is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_EDB93XX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_EDB93xx=m
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=8096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+CONFIG_IDE_TASK_IOCTL=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDE_EP93XX=y
+CONFIG_BLK_DEV_IDE_DMA_EP93XX=y
+CONFIG_IDE_ARM=y
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_EP93XX_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+CONFIG_SLIP=y
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=y
+# CONFIG_SLIP_SMART is not set
+# CONFIG_SLIP_MODE_SLIP6 is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_EP93XX_SPI is not set
+# CONFIG_KEYBOARD_EP93XX_KEYPAD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_TOUCHSCREEN_EP93XX=y
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_AMBAKMI is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+# CONFIG_SERIAL_AMBA_PL011 is not set
+# CONFIG_SERIAL_EP93XX is not set
+# CONFIG_EP93XX_SERIAL_FLASH is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_EP93XX_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_EP93XX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+CONFIG_TIFM_CORE=m
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_EP93XX=y
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_EP93XX_IIS=y
+CONFIG_CODEC_CS4271=y
+# CONFIG_SND_EP93XX_AC97 is not set
+# CONFIG_SND_ARMAACI is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_EP931X=y
+CONFIG_USB_EP931X=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+CONFIG_RTC_DRV_ISL1208=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_EP93XX is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff -burN linux-2.6.20.4/arch/arm/configs/edb9315_defconfig linux/arch/arm/configs/edb9315_defconfig
--- linux-2.6.20.4/arch/arm/configs/edb9315_defconfig	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/configs/edb9315_defconfig	2007-04-24 10:17:46.000000000 +0800
@@ -0,0 +1,1556 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20.4
+# Thu Apr 19 15:56:01 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+CONFIG_ARCH_EP93XX=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Cirrus EP93xx Implementation Options
+#
+CONFIG_CRUNCH=y
+
+#
+# EP93xx Platforms
+#
+# CONFIG_MACH_ADSSPHERE is not set
+# CONFIG_MACH_EDB9302 is not set
+# CONFIG_MACH_EDB9302A is not set
+# CONFIG_MACH_EDB9312 is not set
+CONFIG_MACH_EDB9315=y
+# CONFIG_MACH_EDB9315A is not set
+# CONFIG_MACH_GESBC9312 is not set
+# CONFIG_MACH_TS72XX is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_ARM_VIC=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_IOCTL is not set
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_EP93XX=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/ram"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+# CONFIG_IRLAN is not set
+CONFIG_IRNET=y
+CONFIG_IRCOMM=y
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=y
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_EP93XX_SIR=y
+# CONFIG_ESI_DONGLE is not set
+# CONFIG_ACTISYS_DONGLE is not set
+# CONFIG_TEKRAM_DONGLE is not set
+# CONFIG_TOIM3232_DONGLE is not set
+# CONFIG_LITELINK_DONGLE is not set
+# CONFIG_MA600_DONGLE is not set
+# CONFIG_GIRBIL_DONGLE is not set
+# CONFIG_MCP2120_DONGLE is not set
+# CONFIG_OLD_BELKIN_DONGLE is not set
+# CONFIG_ACT200L_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+# CONFIG_NFTL_RW is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_EDB93XX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_EDB93xx=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+CONFIG_IDE_TASK_IOCTL=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDE_EP93XX=y
+CONFIG_BLK_DEV_IDE_DMA_EP93XX=y
+CONFIG_IDE_ARM=y
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_EP93XX_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=y
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=y
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_AIRO_CS is not set
+CONFIG_PCMCIA_WL3501=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=y
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+CONFIG_SLIP=y
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=y
+# CONFIG_SLIP_SMART is not set
+# CONFIG_SLIP_MODE_SLIP6 is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_EP93XX_SPI is not set
+# CONFIG_KEYBOARD_EP93XX_KEYPAD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_TOUCHSCREEN_EP93XX=y
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+# CONFIG_SERIAL_AMBA_PL011 is not set
+# CONFIG_SERIAL_EP93XX is not set
+CONFIG_EP93XX_SERIAL_FLASH=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_EP93XX_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_EP93XX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+CONFIG_I2C_DEBUG_CHIP=y
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_EP93XX=y
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_DETECT is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_EP93XX_IIS=y
+CONFIG_CODEC_CS4228A=y
+# CONFIG_SND_EP93XX_AC97 is not set
+# CONFIG_SND_ARMAACI is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_EP931X=y
+CONFIG_USB_EP931X=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+CONFIG_RTC_DRV_ISL1208=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_EP93XX is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff -burN linux-2.6.20.4/arch/arm/Kconfig linux/arch/arm/Kconfig
--- linux-2.6.20.4/arch/arm/Kconfig	2007-04-24 10:42:57.000000000 +0800
+++ linux/arch/arm/Kconfig	2007-03-30 10:03:10.000000000 +0800
@@ -906,7 +906,7 @@
 if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
 	|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
 	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
-	|| ARCH_IXP23XX
+	|| ARCH_IXP23XX || ARCH_EP93XX
 source "drivers/ide/Kconfig"
 endif
 
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/core.c linux/arch/arm/mach-ep93xx/core.c
--- linux-2.6.20.4/arch/arm/mach-ep93xx/core.c	2007-04-24 10:42:58.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/core.c	2007-04-19 16:36:12.000000000 +0800
@@ -12,7 +12,7 @@
  * the Free Software Foundation; either version 2 of the License, or (at
  * your option) any later version.
  */
-
+#include <linux/autoconf.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
@@ -32,6 +32,8 @@
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
+#include <linux/utsname.h>
+
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -43,13 +45,21 @@
 #include <asm/pgtable.h>
 #include <asm/io.h>
 
+#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 #include <asm/arch/gpio.h>
+#include <asm/arch/ssp.h>
+#include <asm/arch/crunch.h>
 
 #include <asm/hardware/vic.h>
 
+#ifdef CONFIG_EP93XX_FPU
+extern void crunch_init(void);
+int crunch_is_enabled=0;
+#endif
+
 
 /*************************************************************************
  * Static I/O mappings that are needed for all EP93xx platforms
@@ -93,22 +103,36 @@
  * to use this timer for something else.  We also use timer 4 for keeping
  * track of lost jiffies.
  */
+
+/*
 static unsigned int last_jiffy_time;
+static unsigned int next_jiffy_time;
+static unsigned int accumulator;
 
-#define TIMER4_TICKS_PER_JIFFY		((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+static int after_eq(unsigned long a, unsigned long b)
+{
+	return ((signed long)(a - b)) >= 0;
+}
+*/
+#define TIMER4_TICKS_PER_JIFFY          (CLOCK_TICK_RATE / HZ)
+#define TIMER4_TICKS_MOD_JIFFY          (CLOCK_TICK_RATE % HZ)
 
 static int ep93xx_timer_interrupt(int irq, void *dev_id)
 {
 	write_seqlock(&xtime_lock);
 
 	__raw_writel(1, EP93XX_TIMER1_CLEAR);
-	while ((signed long)
-		(__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
-						>= TIMER4_TICKS_PER_JIFFY) {
-		last_jiffy_time += TIMER4_TICKS_PER_JIFFY;
+	//while (after_eq(__raw_readl(EP93XX_TIMER4_VALUE_LOW), next_jiffy_time)) {
 		timer_tick();
-	}
 
+//		last_jiffy_time = next_jiffy_time;
+//		next_jiffy_time += TIMER4_TICKS_PER_JIFFY;
+//		accumulator += TIMER4_TICKS_MOD_JIFFY;
+//		if (accumulator >= HZ) {
+//			next_jiffy_time++;
+//			accumulator -= HZ;
+//		}
+//	}
 	write_sequnlock(&xtime_lock);
 
 	return IRQ_HANDLED;
@@ -123,24 +147,35 @@
 static void __init ep93xx_timer_init(void)
 {
 	/* Enable periodic HZ timer.  */
-	__raw_writel(0x48, EP93XX_TIMER1_CONTROL);
-	__raw_writel((508469 / HZ) - 1, EP93XX_TIMER1_LOAD);
-	__raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
+//	__raw_writel(0x48, EP93XX_TIMER1_CONTROL);
+//	__raw_writel((508000 / HZ) - 1, EP93XX_TIMER1_LOAD);
+//	__raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
 
 	/* Enable lost jiffy timer.  */
-	__raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
+	//__raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
+
+        __raw_writel(0, TIMER1CONTROL);
+        __raw_writel(LATCH - 1, TIMER1LOAD);
+        __raw_writel(0xc8, TIMER1CONTROL);
+
 
 	setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
 }
 
 static unsigned long ep93xx_gettimeoffset(void)
 {
-	int offset;
+	//int offset;
 
-	offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
+	//offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
 
 	/* Calculate (1000000 / 983040) * offset.  */
-	return offset + (53 * offset / 3072);
+	//return offset + (53 * offset / 3072);
+        unsigned long hwticks;
+        hwticks = LATCH - (inl(TIMER1VALUE) & 0xffff);
+        return (hwticks * (tick_nsec / 1000)) / LATCH;
+
+
+
 }
 
 struct sys_timer ep93xx_timer = {
@@ -153,6 +188,7 @@
  * GPIO handling for EP93xx
  *************************************************************************/
 static unsigned char gpio_int_enable[2];
+static unsigned char gpio_int_debounce[2];
 static unsigned char gpio_int_type1[2];
 static unsigned char gpio_int_type2[2];
 
@@ -160,11 +196,13 @@
 {
 	if (port == 0) {
 		__raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
+		__raw_writeb(gpio_int_debounce[0], EP93XX_GPIO_A_INT_DEBOUNCE);
 		__raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
 		__raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
 		__raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE);
 	} else if (port == 1) {
 		__raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
+		__raw_writeb(gpio_int_debounce[1], EP93XX_GPIO_B_INT_DEBOUNCE);
 		__raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
 		__raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
 		__raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE);
@@ -262,7 +300,7 @@
 	for (i = 0; i < 8; i++) {
 		if (status & (1 << i)) {
 			desc = irq_desc + IRQ_EP93XX_GPIO(8) + i;
-			desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc);
+			desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc );
 		}
 	}
 }
@@ -330,6 +368,13 @@
 		gpio_int_type1[port] &= ~(1 << line);
 		gpio_int_type2[port] &= ~(1 << line);
 	}
+
+	//if (type & IRQT_DEBOUNCE) {
+	//	gpio_int_debounce[port] |= 1 << line;
+	//} else {
+	//	gpio_int_debounce[port] &= ~(1 << line);
+	//}
+
 	update_gpio_ab_int_params(port);
 
 	return 0;
@@ -369,6 +414,9 @@
 {
 	unsigned int mcr;
 
+	if(dev->res.start==EP93XX_UART1_PHYS_BASE)
+	{
+		//printk("set mctrl:1 %x\n",(unsigned long)base);
 	mcr = 0;
 	if (!(mctrl & TIOCM_RTS))
 		mcr |= 2;
@@ -376,8 +424,16 @@
 		mcr |= 1;
 
 	__raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
+	
+	}
+	else
+	{
+		//printk("set mctrl :2 \n");
+	}
+
 }
 
+
 static struct amba_pl010_data ep93xx_uart_data = {
 	.set_mctrl	= ep93xx_uart_set_mctrl,
 };
@@ -431,42 +487,188 @@
        .num_resources  = 0,
 };
 
-
-static struct resource ep93xx_ohci_resources[] = {
+static struct resource ep93xx_ac97_resources[] = {
 	[0] = {
-		.start	= EP93XX_USB_PHYS_BASE,
-		.end	= EP93XX_USB_PHYS_BASE + 0x0fff,
+                .start          = EP93XX_AC97_PHY_BASE,
+                .end            = EP93XX_AC97_PHY_BASE + 0x6C,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+                .start          = NO_IRQ,
+                .end            = NO_IRQ,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static u64 ep93xx_ac97_dma_mask = 0xffffffffUL;
+
+static struct platform_device ep93xx_ac97_device = {
+        .name           = "ep93xx-ac97",
+        .id             = 0,
+        .num_resources  = 2,
+        .resource       = ep93xx_ac97_resources,
+        .dev = {
+                .dma_mask               = &ep93xx_ac97_dma_mask,
+                .coherent_dma_mask      = 0xffffffffUL,
+        },
+};
+
+
+
+static struct ep93xx_eth_data ep93xx_eth_data = {
+	.phy_id			= 1,
+};
+
+static struct resource ep93xx_eth_resource[] = {
+	{
+		.start	= EP93XX_ETHERNET_PHYS_BASE,
+		.end	= EP93XX_ETHERNET_PHYS_BASE + 0xffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_EP93XX_ETHERNET,
+		.end	= IRQ_EP93XX_ETHERNET,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device ep93xx_eth_device = {
+	.name		= "ep93xx-eth",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ep93xx_eth_data,
+	},
+	.num_resources	= 2,
+	.resource	= ep93xx_eth_resource,
+};
+
+static struct resource ep93xx_usb_resources[] = {
+        {
+                .start          = EP93XX_USB_PHYS_BASE,
+                .end            = EP93XX_USB_PHYS_BASE + 0x8C,
+                .flags          = IORESOURCE_MEM,
+        },
+        {
 		.start	= IRQ_EP93XX_USB,
 		.end	= IRQ_EP93XX_USB,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-static struct platform_device ep93xx_ohci_device = {
-	.name		= "ep93xx-ohci",
+static u64 ep93xx_usbhost_dma_mask = 0xffffffffUL;
+
+static struct platform_device ep93xx_usb_device = {
+        .name           = "ep93xx-usb",
 	.id		= -1,
 	.dev		= {
-		.dma_mask		= (void *)0xffffffff,
+                                .dma_mask               = &ep93xx_usbhost_dma_mask,
 		.coherent_dma_mask	= 0xffffffff,
 	},
-	.num_resources	= ARRAY_SIZE(ep93xx_ohci_resources),
-	.resource	= ep93xx_ohci_resources,
+
+        .num_resources  = 2,
+        .resource       = ep93xx_usb_resources,
+};
+
+static struct resource ep93xx_gadget_resources[] = {
+	[0] = {
+		.start		= 0x70000000,
+		.end		= 0x70000000 + 0xff,
+		.flags		= IORESOURCE_MEM,
+	},
+#if (defined(CONFIG_MACH_EDB9315A) || defined(CONFIG_MACH_EDB9307A) || defined(CONFIG_MACH_EDB9302A))
+	[1] = {
+		.start		= IRQ_EP93XX_EXT0,
+		.end		= IRQ_EP93XX_EXT0,
+		.flags		= IORESOURCE_IRQ,
+	},
+#else
+        [1] = {
+                .start          = IRQ_EP93XX_EXT1,
+                .end            = IRQ_EP93XX_EXT1,
+                .flags          = IORESOURCE_IRQ,
+        },
+
+#endif
+
 };
 
 
+static u64 ep93xx_gadget_dma_mask = 0xffffffffUL;
+
+static struct platform_device ep93xx_gadget_device = {
+	.name		= "ep93xx-udc",
+	.id		= -1,
+	.num_resources	= 2,
+	.resource	= ep93xx_gadget_resources,
+	.dev = {
+		.dma_mask               = &ep93xx_gadget_dma_mask,
+		.coherent_dma_mask      = 0xffffffffUL,
+	},
+};
+
+
+#if defined(CONFIG_MTD_EDB93XX)
+static struct flash_platform_data ep93xx_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= EP93XX_FLASH_WIDTH,
+};
+
+static struct resource ep93xx_flash_resource = {
+	.start		= EP93XX_FLASH_BASE,
+	.end		= EP93XX_FLASH_BASE + EP93XX_FLASH_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device ep93xx_flash_device = {
+	.name		= "edb93xxflash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &ep93xx_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &ep93xx_flash_resource,
+};
+
+#endif
+static struct resource ep93xx_pcmcia_resources[] = {
+        [0] = {
+                .start          = PCMCIA_BASE_PHYS,
+                .end            = PCMCIA_BASE_PHYS + PCMCIA_SIZE,
+                .flags          = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start          = IRQ_EP93XX_GPIO0MUX,
+                .end            = IRQ_EP93XX_GPIO7MUX,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static u64 ep93xx_pcmcia_dma_mask = 0xffffffffUL;
+
+static struct platform_device ep93xx_pcmcia_device = {
+        .name           = "ep93xx-pcmcia",
+        .id             = -1,
+        .num_resources  = 2,
+        .resource       = ep93xx_pcmcia_resources,
+        .dev = {
+                .dma_mask               = &ep93xx_pcmcia_dma_mask,
+                .coherent_dma_mask      = 0xffffffffUL,
+        },
+};
+
+
+
 void __init ep93xx_init_devices(void)
 {
 	unsigned int v;
+	unsigned int uiTemp;
+	int SSP_Handle;
 
 	ep93xx_clock_init();
-
 	/*
 	 * Disallow access to MaverickCrunch initially.
 	 */
 	v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+	v = v | SYSCON_DEVCFG_U2EN;
 	v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
 	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 	__raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
@@ -476,9 +678,60 @@
 	amba_device_register(&uart3_device, &iomem_resource);
 
 	platform_device_register(&ep93xx_rtc_device);
-	platform_device_register(&ep93xx_ohci_device);
+	memcpy(ep93xx_eth_data.dev_addr,
+		(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
+	platform_device_register(&ep93xx_eth_device);
+	platform_device_register(&ep93xx_usb_device);
+	platform_device_register(&ep93xx_gadget_device);
+	
+	#if defined(CONFIG_MTD_EDB93XX)
+	platform_device_register(&ep93xx_flash_device);
+	#endif
+	//platform_device_register(&ep93xx_raster_device);
+	platform_device_register(&ep93xx_pcmcia_device);
+	platform_device_register(&ep93xx_ac97_device);
+	/*
+	 * Get the hostname from the SPI FLASH if it has been programmed.
+	 */
+
+	SSP_Handle = SSPDriver->Open(SERIAL_FLASH, 0);
+	if(SSP_Handle != -1) {
+		SSPDriver->Read( SSP_Handle, 0x1000, &uiTemp );
+		if (uiTemp == 0x43414d45) {
+			SSPDriver->Read( SSP_Handle, 0x1010, &uiTemp );
+			init_uts_ns.name.nodename[0] = uiTemp & 255;
+			init_uts_ns.name.nodename[1] = (uiTemp >> 8) & 255;
+			init_uts_ns.name.nodename[2] = (uiTemp >> 16) & 255;
+			init_uts_ns.name.nodename[3] = uiTemp >> 24;
+			SSPDriver->Read( SSP_Handle, 0x1014, &uiTemp );
+			init_uts_ns.name.nodename[4] = uiTemp & 255;
+			init_uts_ns.name.nodename[5] = (uiTemp >> 8) & 255;
+			init_uts_ns.name.nodename[6] = (uiTemp >> 16) & 255;
+			init_uts_ns.name.nodename[7] = uiTemp >> 24;
+			SSPDriver->Read( SSP_Handle, 0x1018, &uiTemp );
+			init_uts_ns.name.nodename[8] = uiTemp & 255;
+			init_uts_ns.name.nodename[9] = (uiTemp >> 8) & 255;
+			init_uts_ns.name.nodename[10] = (uiTemp >> 16) & 255;
+			init_uts_ns.name.nodename[11] = uiTemp >> 24;
+			SSPDriver->Read( SSP_Handle, 0x101c, &uiTemp );
+			init_uts_ns.name.nodename[12] = uiTemp & 255;
+			init_uts_ns.name.nodename[13] = (uiTemp >> 8) & 255;
+			init_uts_ns.name.nodename[14] = (uiTemp >> 16) & 255;
+			init_uts_ns.name.nodename[15] = uiTemp >> 24;
+			init_uts_ns.name.nodename[16] = 0;
+
+		}
+		SSPDriver->Close( SSP_Handle );
+	}
 
 #ifdef CONFIG_CRUNCH
 	elf_hwcap |= HWCAP_CRUNCH;
 #endif
+
+#ifdef CONFIG_EP93XX_FPU
+    crunch_enable();
+    crunch_init();
+    crunch_is_enabled=1;
+#endif
+
 }
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/crunch.c linux/arch/arm/mach-ep93xx/crunch.c
--- linux-2.6.20.4/arch/arm/mach-ep93xx/crunch.c	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/crunch.c	2007-03-29 15:21:28.000000000 +0800
@@ -0,0 +1,343 @@
+/*
+ *	Cirrus MaverickCrunch support
+ *
+ *	Copyright (c) 2003 Petko Manolov <petkan@nucleusys.com>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	version 2 as published by the Free Software Foundation;
+ */
+
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/fpstate.h>
+#include <asm/arch/crunch.h>
+
+
+unsigned int read_dspsc_low(void)
+{
+	int res;
+
+	asm volatile (
+	"cdp        p4, 1, c15, c0, c0, 7\n\t"	// "cfmv32sc      mvdx15, dspsc\n\t"
+	"mrc        p5, 0, %0, c15, c0, 0"	// "cfmvr64l  %0, mvdx15"
+	:"=r" (res)
+	:
+	:"memory");
+
+	return res;
+}
+
+unsigned int read_dspsc_high(void)
+{
+	int res;
+
+	asm volatile (
+	"cdp        p4, 1, c15, c0, c0, 7\n\t"	// "cfmv32sc   mvdx15, dspsc\n\t"
+	"mrc        p5, 0, %0, c15, c0, 1"	// "cfmvr64h   %0, mvdx15"
+	:"=r" (res)
+	:
+	:"memory");
+
+	return res;
+}
+
+void write_dspsc(unsigned int dspsc)
+{
+	asm volatile (
+	"mcr        p5, 0, %0, c15, c0, 0\n\t"	// "cfmv64lr     mvdx15, %0\n\t"
+	"cdp        p4, 2, c15, c0, c0, 7"	// "cfmvsc32     dspsc, mvdx15"
+	:
+	:"r" (dspsc), "rN"(-1)
+	:"memory");
+}
+
+void crunch_init(void)
+{
+	write_dspsc(CRUNCH_INIT);
+//	current->flags |= PF_USEDCRUNCH;
+}
+
+
+/*
+ * had to do it this way since "clf(); cli();" takes longer
+ */
+static inline void clear_fiq_irq(void)
+{
+	int cpsr;
+
+	asm volatile (
+	"mrs	%0, CPSR\n\t"
+	"orr	%0, %0, #192\n\t"
+	"msr	CPSR_c, %0"
+	:"=r" (cpsr)
+	:
+	:"memory");
+}
+
+/*
+ * had to do it this way since "stf(); sti();" takes (twice) longer
+ */
+
+static inline void restore_fiq_irq(void)
+{
+	int cpsr;
+
+	asm volatile (
+	"mrs	%0, CPSR\n\t"
+	"bic	%0, %0, #192\n\t"
+	"msr	CPSR_c, %0"
+	:"=r" (cpsr)
+	:
+	:"memory");
+}
+
+#ifdef CONFIG_EP93XX_FPU_ACC
+
+static inline void save_accumulators(struct task_struct *tsk)
+{
+	int tmp;
+	struct thread_info *ti = tsk->thread_info; /* current_thread_info(); */
+	struct fp_crunch_struct *fp = &ti->fpstate.crunch;
+
+	/*
+	 * clear the IRQ & FIQ to avoid some of the bugs in the errata
+	 */
+	clear_fiq_irq();
+
+	asm volatile (
+	"cdp        p4, 1, c0, c0, c0, 2\n\t"	// "cfmv32al      mvfx0, mvax0\n\t"
+	"stc        p5, c0, [%0], #4\n\t"	// "cfstr32      mvfx0, [%0], 4\n\t"
+	"cdp        p4, 1, c1, c0, c0, 3\n\t"	// "cfmv32am      mvfx1, mvax0\n\t"
+	"stc        p5, c1, [%0], #4\n\t"	// "cfstr32      mvfx1, [%0], 4\n\t"
+	"cdp        p4, 1, c2, c0, c0, 4\n\t"	// "cfmv32ah      mvfx2, mvax0\n\t"
+	"stc        p5, c2, [%0], #4\n\t"	// "cfstr32      mvfx2, [%0], 4\n\t"
+	"cdp        p4, 1, c3, c1, c0, 2\n\t"	// "cfmv32al      mvfx3, mvax1\n\t"
+	"stc        p5, c3, [%0], #4\n\t"	// "cfstr32      mvfx3, [%0], 4\n\t"
+	"cdp        p4, 1, c4, c1, c0, 3\n\t"	// "cfmv32am      mvfx4, mvax1\n\t"
+	"stc        p5, c4, [%0], #4\n\t"	// "cfstr32      mvfx4, [%0], 4\n\t"
+	"cdp        p4, 1, c5, c1, c0, 4\n\t"	// "cfmv32ah      mvfx5, mvax1\n\t"
+	"stc        p5, c5, [%0], #4\n\t"	// "cfstr32      mvfx5, [%0], 4\n\t"
+	"cdp        p4, 1, c6, c2, c0, 2\n\t"	// "cfmv32al      mvfx6, mvax2\n\t"
+	"stc        p5, c6, [%0], #4\n\t"	// "cfstr32      mvfx6, [%0], 4\n\t"
+	"cdp        p4, 1, c7, c2, c0, 3\n\t"	// "cfmv32am      mvfx7, mvax2\n\t"
+	"stc        p5, c7, [%0], #4\n\t"	// "cfstr32      mvfx7, [%0], 4\n\t"
+	"cdp        p4, 1, c8, c2, c0, 4\n\t"	// "cfmv32ah      mvfx8, mvax2\n\t"
+	"stc        p5, c8, [%0], #4\n\t"	// "cfstr32      mvfx8, [%0], 4\n\t"
+	"cdp        p4, 1, c9, c3, c0, 2\n\t"	// "cfmv32al      mvfx9, mvax3\n\t"
+	"stc        p5, c9, [%0], #4\n\t"	// "cfstr32      mvfx9, [%0], 4\n\t"
+	"cdp        p4, 1, c10, c3, c0, 3\n\t"	// "cfmv32am     mvfx10, mvax3\n\t"
+	"stc        p5,c10, [%0], #4\n\t"	// "cfstr32      mvfx10, [%0], 4\n\t"
+	"cdp        p4, 1, c11, c3, c0, 4\n\t"	// "cfmv32ah     mvfx11, mvax3\n\t"
+	"stc        p5, c11, [%0, #0]"		// "cfstr32      mvfx11, [%0, #0]"
+	:"=&r" (tmp)
+	:"0" (&fp->acc0[0])
+	:"memory");
+
+	restore_fiq_irq();
+}
+
+static inline void restore_accumulators(struct task_struct *tsk)
+{
+	int tmp;
+	struct thread_info *ti = tsk->thread_info; /* current_thread_info(); */
+	struct fp_crunch_struct *fp = &ti->fpstate.crunch;
+
+	/*
+	 * clear the IRQ & FIQ to avoid some of the bugs in the errata
+	 */
+	clear_fiq_irq();
+
+	asm volatile (
+	"ldc        p5, c0, [%0],#4\n\t"	// "cfldr32        mvfx0, [%0], 4\n\t"
+	"cdp        p4, 2, c0, c0, c0, 2\n\t"	// "cfmval32       mvax0, mvfx0\n\t"
+	"ldc        p5, c1, [%0],#4\n\t"	// "cfldr32        mvfx1, [%0], 4\n\t"
+	"cdp        p4, 2, c0, c1, c0, 3\n\t"	// "cfmvam32       mvax0, mvfx1\n\t"
+	"ldc        p5, c2, [%0],#4\n\t"	// "cfldr32        mvfx2, [%0], 4\n\t"
+	"cdp        p4, 2, c0, c2, c0, 4\n\t"	// "cfmvah32       mvax0, mvfx2\n\t"
+	"ldc        p5, c3, [%0],#4\n\t"	// "cfldr32        mvfx3, [%0], 4\n\t"
+	"cdp        p4, 2, c1, c3, c0, 2\n\t"	// "cfmval32       mvax1, mvfx3\n\t"
+	"ldc        p5, c4, [%0],#4\n\t"	// "cfldr32        mvfx4, [%0], 4\n\t"
+	"cdp        p4, 2, c1, c4, c0, 3\n\t"	// "cfmvam32       mvax1, mvfx4\n\t"
+	"ldc        p5, c5, [%0],#4\n\t"	// "cfldr32        mvfx5, [%0], 4\n\t"
+	"cdp        p4, 2, c1, c5, c0, 4\n\t"	// "cfmvah32       mvax1, mvfx5\n\t"
+	"ldc        p5, c6, [%0],#4\n\t"	// "cfldr32        mvfx6, [%0], 4\n\t"
+	"cdp        p4, 2, c2, c6, c0, 2\n\t"	// "cfmval32       mvax2, mvfx6\n\t"
+	"ldc        p5, c7, [%0],#4\n\t"	// "cfldr32        mvfx7, [%0], 4\n\t"
+	"cdp        p4, 2, c2, c7, c0, 3\n\t"	// "cfmvam32       mvax2, mvfx7\n\t"
+	"ldc        p5, c8, [%0],#4\n\t"	// "cfldr32        mvfx8, [%0], 4\n\t"
+	"cdp        p4, 2, c2, c8, c0, 4\n\t"	// "cfmvah32       mvax2, mvfx8\n\t"
+	"ldc        p5, c9, [%0],#4\n\t"	// "cfldr32        mvfx9, [%0], 4\n\t"
+	"cdp        p4, 2, c3, c9, c0, 2\n\t"	// "cfmval32       mvax3, mvfx9\n\t"
+	"ldc        p5, c10, [%0],#4\n\t"	// "cfldr32        mvfx10, [%0], 4\n\t"
+	"cdp        p4, 2, c3, c10, c0, 3\n\t"	// "cfmvam32       mvax3, mvfx10\n\t"
+	"ldc        p5, c11, [%0, #0]\n\t"	// "cfldr32        mvfx11, [%0, #0]\n\t"
+	"cdp        p4, 2, c3, c11, c0, 4"	// "cfmvah32       mvax3, mvfx11"
+	:"=&r" (tmp)
+	:"0" (&fp->acc0[0])
+	:"memory");
+
+	restore_fiq_irq();
+}
+
+#endif
+
+
+
+#ifdef CONFIG_EP93XX_FPU
+void save_crunch(struct task_struct *tsk)
+{
+	int tmp;
+	struct thread_info *ti = tsk->thread_info; /* current_thread_info(); */
+	struct fp_crunch_struct *fp = &ti->fpstate.crunch;
+
+
+	asm volatile (
+	"stcl       p5, c0, [%0],#8\n\t"	// "cfstr64        mvdx0, [%0], 8\n\t"
+	"stcl       p5, c1, [%0],#8\n\t"	// "cfstr64        mvdx1, [%0], 8\n\t"
+	"stcl       p5, c2, [%0],#8\n\t"	// "cfstr64        mvdx2, [%0], 8\n\t"
+	"stcl       p5, c3, [%0],#8\n\t"	// "cfstr64        mvdx3, [%0], 8\n\t"
+	"stcl       p5, c4, [%0],#8\n\t"	// "cfstr64        mvdx4, [%0], 8\n\t"
+	"stcl       p5, c5, [%0],#8\n\t"	// "cfstr64        mvdx5, [%0], 8\n\t"
+	"stcl       p5, c6, [%0],#8\n\t"	// "cfstr64        mvdx6, [%0], 8\n\t"
+	"stcl       p5, c7, [%0],#8\n\t"	// "cfstr64        mvdx7, [%0], 8\n\t"
+	"stcl       p5, c8, [%0],#8\n\t"	// "cfstr64        mvdx8, [%0], 8\n\t"
+	"stcl       p5, c9, [%0],#8\n\t"	// "cfstr64        mvdx9, [%0], 8\n\t"
+	"stcl       p5, c10, [%0],#8\n\t"	// "cfstr64        mvdx10, [%0], 8\n\t"
+	"stcl       p5, c11, [%0],#8\n\t"	// "cfstr64        mvdx11, [%0], 8\n\t"
+	"stcl       p5, c12, [%0],#8\n\t"	// "cfstr64        mvdx12, [%0], 8\n\t"
+	"stcl       p5, c13, [%0],#8\n\t"	// "cfstr64        mvdx13, [%0], 8\n\t"
+	"stcl       p5, c14, [%0],#8\n\t"	// "cfstr64        mvdx14, [%0], 8\n\t"
+	"stcl       p5, c15, [%0, #0]\n\t"	// "cfstr64        mvdx15, [%0, #0]\n\t"
+	"cdp        p4, 1, c15, c0, c0, 7\n\t"	// "cfmv32sc       mvdx15, dspsc\n\t"
+	"stc        p5, c15, [%2, #0]"		// "cfstr32        mvfx15, [%2, #0]"
+	:"=&r" (tmp)
+	:"0" (&fp->regs[0]), "r" (&fp->dspsc)
+	:"memory");
+#ifdef CONFIG_EP93XX_CRUNCH_ACC
+	/*
+	 * this call should be made exactly here since it's corrupting
+	 * the contents of most crunch registers ;-)
+	 */
+	save_accumulators(tsk);
+#endif
+}
+
+void restore_crunch(struct task_struct *tsk)
+{
+	int tmp;
+	struct thread_info *ti = tsk->thread_info; /* current_thread_info(); */
+	struct fp_crunch_struct *fp = &ti->fpstate.crunch;
+
+#ifdef CONFIG_EP93XX_CRUNCH_ACC
+	/*
+	 * same as above, but reversed.  if you put the call below the 'asm'
+	 * code then you'll corrupt the 
+	 */
+	restore_accumulators(tsk);
+#endif
+	asm volatile (
+	"ldc        p5, c15, [%2, #0]\n\t"	// "cfldr32   mvfx15, [%2, #0]\n\t"
+	"cdp        p4, 2, c15, c0, c0, 7\n\t"	// "cfmvsc32  dspsc, mvdx15\n\t"
+	"ldcl       p5, c0, [%0],#8\n\t"	// "cfldr64   mvdx0, [%0], 8\n\t"
+	"ldcl       p5, c1, [%0],#8\n\t"	// "cfldr64   mvdx1, [%0], 8\n\t"
+	"ldcl       p5, c2, [%0],#8\n\t"	// "cfldr64   mvdx2, [%0], 8\n\t"
+	"ldcl       p5, c3, [%0],#8\n\t"	// "cfldr64   mvdx3, [%0], 8\n\t"
+	"ldcl       p5, c4, [%0],#8\n\t"	// "cfldr64   mvdx4, [%0], 8\n\t"
+	"ldcl       p5, c5, [%0],#8\n\t"	// "cfldr64   mvdx5, [%0], 8\n\t"
+	"ldcl       p5, c6, [%0],#8\n\t"	// "cfldr64   mvdx6, [%0], 8\n\t"
+	"ldcl       p5, c7, [%0],#8\n\t"	// "cfldr64   mvdx7, [%0], 8\n\t"
+	"ldcl       p5, c8, [%0],#8\n\t"	// "cfldr64   mvdx8, [%0], 8\n\t"
+	"ldcl       p5, c9, [%0],#8\n\t"	// "cfldr64   mvdx9, [%0], 8\n\t"
+	"ldcl       p5, c10, [%0],#8\n\t"	// "cfldr64   mvdx10, [%0], 8\n\t"
+	"ldcl       p5, c11, [%0],#8\n\t"	// "cfldr64   mvdx11, [%0], 8\n\t"
+	"ldcl       p5, c12, [%0],#8\n\t"	// "cfldr64   mvdx12, [%0], 8\n\t"
+	"ldcl       p5, c13, [%0],#8\n\t"	// "cfldr64   mvdx13, [%0], 8\n\t"
+	"ldcl       p5, c14, [%0],#8\n\t"	// "cfldr64   mvdx14, [%0], 8\n\t"
+	"ldcl       p5, c15, [%0, #0]"		// "cfldr64   mvdx15, [%0, #0]"
+	:"=&r" (tmp)
+	:"0" (&fp->regs[0]), "r" (&fp->dspsc)
+	:"memory");
+}
+#endif
+
+#if 0
+
+void crunch_exception(int irq, void *dev_id, struct pt_regs *regs)
+{
+	int sc, opc;
+
+	send_sig(SIGFPE, current, 1);
+	opc = read_dspsc_high();
+	sc = read_dspsc_low();
+	printk("%s: DSPSC_high=%08x, DSPSC_low=%08x\n", __FUNCTION__, opc, sc);
+	sc &= ~(1 << 21);	/* we recure without this */
+	write_dspsc(sc);
+}
+
+/*
+ * only register ep9312 default FPU handler...
+ */
+__init int setup_crunch(void)
+{
+	int res;
+
+	res = request_irq(CRUNCH_IRQ, crunch_exception, SA_INTERRUPT, "FPU", NULL);
+	if (res) {
+		printk("Crunch IRQ (%d) allocation failure\n", CRUNCH_IRQ);
+		return res;
+	}
+
+	return res;
+}
+
+static inline int insn_is_crunch(long insn)
+{
+	long tmp;
+
+	tmp = (insn >> 24) & 0x0e;
+	/* cdp, mcr, mrc */
+	if (tmp == 0x0e || tmp == 0x0c) {
+		tmp = (insn >> 8) & 0x0f;
+		if (tmp == 4)
+			return 1;
+		if (tmp == 5)
+			return 1;
+		if (tmp == 6)
+			return 1;
+	}
+
+	return 0;
+}
+
+int crunch_opcode(struct pt_regs *regs)
+{
+	int *insn;
+	struct task_struct *tsk = current;
+
+	insn = (int *) (instruction_pointer(regs) - 4);
+	if (!insn_is_crunch(*insn)) {
+		/*
+		 * not a crunch instruction, but might be another
+		 * (FPA/VFP) floating point one
+		 */
+		return 0;
+	}
+
+	crunch_enable();
+	regs->ARM_pc -= 4;	/* restart the Crunch instruction */
+	if (tsk->flags & PF_USEDCRUNCH) {
+		restore_crunch(tsk);
+	} else {
+		crunch_init();
+	}
+	tsk->flags |= PF_USEDFPU;
+
+	return 1;
+}
+
+__initcall(setup_crunch);
+#endif
+
+
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/dma.c linux/arch/arm/mach-ep93xx/dma.c
--- linux-2.6.20.4/arch/arm/mach-ep93xx/dma.c	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/dma.c	2007-03-29 15:22:18.000000000 +0800
@@ -0,0 +1,28 @@
+/*
+ *  linux/arch/arm/mach-ep93xx/dma.c
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+
+#include <asm/dma.h>
+#include <asm/mach/dma.h>
+
+void __init arch_dma_init(dma_t *dma)
+{
+}
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/dma_ep93xx.c linux/arch/arm/mach-ep93xx/dma_ep93xx.c
--- linux-2.6.20.4/arch/arm/mach-ep93xx/dma_ep93xx.c	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/dma_ep93xx.c	2007-04-10 15:34:33.000000000 +0800
@@ -0,0 +1,2932 @@
+/******************************************************************************
+ * arch/arm/mach-ep9312/dma_ep93xx.c
+ *
+ * Support functions for the ep93xx internal DMA channels.
+ * (see also Documentation/arm/ep93xx/dma.txt)
+ *
+ * Copyright (C) 2003  Cirrus Logic
+ *
+ * A large portion of this file is based on the dma api implemented by
+ * Nicolas Pitre, dma-sa1100.c, copyrighted 2000.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ ****************************************************************************/
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/mach/dma.h>
+#include "dma_ep93xx.h"
+
+/*****************************************************************************
+ *
+ * Debugging macros
+ *
+ ****************************************************************************/
+#undef DEBUG
+//#define DEBUG   1
+#ifdef DEBUG
+#define DPRINTK( fmt, arg... )  printk( fmt, ##arg )
+#else
+#define DPRINTK( fmt, arg... )
+#endif
+
+/*****************************************************************************
+ *
+ * static global variables
+ *
+ ****************************************************************************/
+ep93xx_dma_t dma_chan[MAX_EP93XX_DMA_CHANNELS];
+
+/*
+ *  lock used to protect the list of dma channels while searching for a free
+ *  channel during dma_request.
+ */
+//static spinlock_t dma_list_lock;
+static spinlock_t dma_list_lock = SPIN_LOCK_UNLOCKED;
+
+/*****************************************************************************
+ *
+ *  Internal DMA processing functions.
+ *
+ ****************************************************************************/
+/*****************************************************************************
+ *
+ *  get_dma_channel_from_handle()
+ *
+ *  If Handle is valid, returns the DMA channel # (0 to 9 for channels 1-10)
+ *  If Handle is not valid, returns -1.
+ *
+ ****************************************************************************/
+static int
+dma_get_channel_from_handle(int handle)
+{
+	int channel;
+
+	/*
+	 *  Get the DMA channel # from the handle.
+	 */
+	channel = ((int)handle & DMA_HANDLE_SPECIFIER_MASK) >> 28;
+
+	/*
+	 *  See if this is a valid handle.
+	 */
+	if (dma_chan[channel].last_valid_handle != (int)handle) {
+		DPRINTK("DMA ERROR - invalid handle 0x%x \n", handle);
+		return(-1);
+	}
+
+	/*
+	 *  See if this instance is still open
+	 */
+	if (!dma_chan[channel].ref_count )
+		return(-1);
+
+	return(channel);
+}
+
+static void dma_m2m_transfer_done(ep93xx_dma_t *dma)
+{
+	unsigned int uiCONTROL;
+	unsigned int M2M_reg_base = dma->reg_base;
+	unsigned int read_back;
+
+	DPRINTK("1  ");
+
+	outl( 0, M2M_reg_base+M2M_OFFSET_INTERRUPT );
+
+	if (dma->total_buffers) {
+		/*
+		 * The current_buffer has already been tranfered, so add the
+		 * byte count to the total_bytes field.
+		 */
+		dma->total_bytes = dma->total_bytes +
+			dma->buffer_queue[dma->current_buffer].size;
+
+		/*
+		 * Mark the current_buffer as used.
+		 */
+		dma->buffer_queue[dma->current_buffer].used = TRUE;
+
+		/*
+		 * Increment the used buffer counter
+		 */
+		dma->used_buffers++;
+
+		DPRINTK("#%d", dma->current_buffer);
+
+		/*
+		 * Increment the current_buffer
+		 */
+		dma->current_buffer = (dma->current_buffer + 1) %
+				      MAX_EP93XX_DMA_BUFFERS;
+
+		/*
+		 * check if there's a new buffer to transfer.
+		 */
+		if (dma->new_buffers && dma->xfer_enable) {
+			/*
+			 * We have a new buffer to transfer so program in the
+			 * buffer values.  Since a STALL interrupt was
+			 * triggered, we program the buffer descriptor 0
+			 *
+			 * Set the SAR_BASE/DAR_BASE/BCR registers with values
+			 * from the next buffer in the queue.
+			 */
+			outl( dma->buffer_queue[dma->current_buffer].source,
+			      M2M_reg_base + M2M_OFFSET_SAR_BASE0 );
+
+			outl( dma->buffer_queue[dma->current_buffer].dest,
+			      M2M_reg_base + M2M_OFFSET_DAR_BASE0 );
+
+			outl( dma->buffer_queue[dma->current_buffer].size,
+			      M2M_reg_base + M2M_OFFSET_BCR0 );
+
+			DPRINTK("SAR_BASE0 - 0x%x\n", dma->buffer_queue[dma->current_buffer].source);
+			DPRINTK("DAR_BASE0 - 0x%x\n", dma->buffer_queue[dma->current_buffer].dest);
+			DPRINTK("BCR0 - 0x%x\n", dma->buffer_queue[dma->current_buffer].size);
+
+			/*
+			 * Decrement the new buffer counter
+			 */
+			dma->new_buffers--;
+
+			/*
+			 * If there's a second new buffer, we program the
+			 * second buffer descriptor.
+			 */
+			if (dma->new_buffers) {
+				outl( dma->buffer_queue[(dma->current_buffer + 1) %
+							MAX_EP93XX_DMA_BUFFERS].source,
+				      M2M_reg_base+M2M_OFFSET_SAR_BASE1 );
+
+				outl( dma->buffer_queue[(dma->current_buffer + 1) %
+							MAX_EP93XX_DMA_BUFFERS].dest,
+				      M2M_reg_base+M2M_OFFSET_DAR_BASE1 );
+
+				outl( dma->buffer_queue[(dma->current_buffer + 1) %
+							MAX_EP93XX_DMA_BUFFERS].size,
+				      M2M_reg_base+M2M_OFFSET_BCR1 );
+
+				uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+				uiCONTROL |= CONTROL_M2M_NFBINTEN;
+				outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+
+				dma->new_buffers--;
+			}
+		} else {
+			DPRINTK("2 \n");
+			/*
+			 * There's a chance we setup both buffer descriptors,
+			 * but didn't service the NFB quickly enough, causing
+			 * the channel to transfer both buffers, then enter the
+			 * stall state.  So, we need to be able to process the
+			 * second buffer.
+			 */
+			if ((dma->used_buffers + dma->new_buffers) < dma->total_buffers)
+			{
+				DPRINTK("3 ");
+
+				/*
+				 * The current_buffer has already been
+				 * tranferred, so add the byte count to the
+				 * total_bytes field.
+				 */
+				dma->total_bytes = dma->total_bytes +
+					dma->buffer_queue[dma->current_buffer].size;
+
+				/*
+				 * Mark the current_buffer as used.
+				 */
+				dma->buffer_queue[dma->current_buffer].used = TRUE;
+
+				/*
+				 * Increment the used buffer counter
+				 */
+				dma->used_buffers++;
+
+				DPRINTK("#%d", dma->current_buffer);
+
+				/*
+				 * Increment the current buffer pointer.
+				 */
+				dma->current_buffer = (dma->current_buffer + 1) %
+						      MAX_EP93XX_DMA_BUFFERS;
+
+			}
+
+			/*
+			 * No new buffers to transfer, so disable the channel.
+			 */
+			uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+			uiCONTROL &= ~CONTROL_M2M_ENABLE;
+			outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+
+			/*
+			 * Indicate that this channel is in the pause by
+			 * starvation state by setting the pause bit to true.
+			 */
+			dma->pause = TRUE;
+		}
+	} else {
+		/*
+		 * No buffers to transfer, or old buffers to mark as used,
+		 * so disable the channel
+		 */
+		uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+		uiCONTROL &= ~CONTROL_M2M_ENABLE;
+		outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+
+		/*
+		 * Must read the control register back after a write.
+		 */
+		read_back = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+
+		/*
+		 * Indicate that this channel is in the pause by
+		 * starvation state by setting the pause bit to true.
+		 */
+		dma->pause = TRUE;
+	}
+}
+
+static void dma_m2m_next_frame_buffer(ep93xx_dma_t *dma)
+{
+	int loop;
+	unsigned int uiCONTROL;
+	unsigned int M2M_reg_base = dma->reg_base;
+
+	DPRINTK("5  ");
+
+	if (dma->total_buffers) {
+		DPRINTK("6  ");
+		/*
+		 * The iCurrentBuffer has already been transfered.  so add the
+		 * byte count from the current buffer to the total byte count.
+		 */
+		dma->total_bytes = dma->total_bytes +
+			dma->buffer_queue[dma->current_buffer].size;
+
+		/*
+		 * Mark the Current Buffer as used.
+		 */
+		dma->buffer_queue[dma->current_buffer].used = TRUE;
+
+		/*
+		 * Increment the used buffer counter
+		 */
+		dma->used_buffers++;
+
+		DPRINTK("#%d", dma->current_buffer);
+
+		if ((dma->buffer_queue[
+		    (dma->current_buffer + 1) % MAX_EP93XX_DMA_BUFFERS].last) ||
+		    (dma->new_buffers == 0) || (dma->xfer_enable == FALSE)) {
+			DPRINTK("7  ");
+
+			/*
+			 * This is the last Buffer in this transaction, so
+			 * disable the NFB interrupt.  We shouldn't get an NFB
+			 * int when the FSM moves to the ON state where it
+			 * would typically get the NFB int indicating a new
+			 * buffer can be programmed.  Instead, once in the ON
+			 * state, the DMA will just proceed to complete the
+			 * transfer of the current buffer, move the FSB
+			 * directly to the STALL state where a STALL interrupt
+			 * will be generated.
+			 */
+			uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+			uiCONTROL &= ~CONTROL_M2M_NFBINTEN ;
+			outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+
+			/*
+			 * The current buffer has been transferred, so
+			 * increment the current buffer counter to reflect
+			 * this.
+			 */
+			dma->current_buffer = (dma->current_buffer + 1) %
+					      MAX_EP93XX_DMA_BUFFERS;
+
+			DPRINTK("End of NFB handling. \n");
+			DPRINTK("CONTROL - 0x%x \n",
+                                inl(M2M_reg_base+M2M_OFFSET_CONTROL) );
+			DPRINTK("STATUS - 0x%x \n",
+                                inl(M2M_reg_base+M2M_OFFSET_STATUS) );
+			DPRINTK("SAR_BASE0 - 0x%x \n",
+                                inl(M2M_reg_base+M2M_OFFSET_SAR_BASE0) );
+			DPRINTK("SAR_CUR0 - 0x%x \n",
+                                inl(M2M_reg_base+M2M_OFFSET_SAR_CURRENT0) );
+			DPRINTK("DAR_BASE0 - 0x%x \n",
+                                inl(M2M_reg_base+M2M_OFFSET_DAR_BASE0) );
+			DPRINTK("DAR_CUR0 - 0x%x \n",
+                                inl(M2M_reg_base+M2M_OFFSET_DAR_CURRENT0) );
+
+			DPRINTK("Buffer	buf_id	 source	   size	   last	   used \n");
+			for (loop = 0; loop < 32; loop ++)
+				DPRINTK("%d		0x%x		0x%x		 0x%x		%d		 %d \n",
+					loop, dma->buffer_queue[loop].buf_id,
+					dma->buffer_queue[loop].source,
+					dma->buffer_queue[loop].size,
+					dma->buffer_queue[loop].last,
+					dma->buffer_queue[loop].used);
+			DPRINTK("pause	 0x%x		0x%x		 0x%x		%d		 %d \n",
+				dma->pause_buf.buf_id, dma->pause_buf.source,
+				dma->pause_buf.size, dma->pause_buf.last,
+				dma->pause_buf.used);
+
+			DPRINTK("Pause - %d \n", dma->pause);
+			DPRINTK("xfer_enable - %d \n", dma->xfer_enable);
+			DPRINTK("total bytes - 0x%x \n", dma->total_bytes);
+			DPRINTK("total buffer - %d \n", dma->total_buffers);
+			DPRINTK("new buffers - %d \n", dma->new_buffers);
+			DPRINTK("current buffer - %d \n", dma->current_buffer);
+			DPRINTK("last buffer - %d \n", dma->last_buffer);
+			DPRINTK("used buffers - %d \n", dma->used_buffers);
+			DPRINTK("callback addr - 0x%p \n", dma->callback);
+
+		} else if (dma->new_buffers) {
+			DPRINTK("8  ");
+			/*
+			 * We have a new buffer, so increment the current
+			 * buffer to point to the next buffer, which is already
+			 * programmed into the DMA. Next time around, it'll be
+			 * pointing to the current buffer.
+			 */
+			dma->current_buffer = (dma->current_buffer + 1) %
+					      MAX_EP93XX_DMA_BUFFERS;
+
+			/*
+			 * We know we have a new buffer to program as the next
+			 * buffer, so check which set of SAR_BASE/DAR_BASE/BCR
+			 * registers to program.
+			 */
+			if ( inl(M2M_reg_base+M2M_OFFSET_STATUS) & STATUS_M2M_NB ) {
+				/*
+				 * Set the SAR_BASE1/DAR_BASE1/BCR1 registers
+				 * with values from the next buffer in the
+				 * queue.
+				 */
+				outl( dma->buffer_queue[(dma->current_buffer + 1) %
+							MAX_EP93XX_DMA_BUFFERS].source,
+				      M2M_reg_base+M2M_OFFSET_SAR_BASE1 );
+
+				outl( dma->buffer_queue[(dma->current_buffer + 1) %
+							MAX_EP93XX_DMA_BUFFERS].dest,
+				      M2M_reg_base+M2M_OFFSET_DAR_BASE1 );
+
+				outl( dma->buffer_queue[(dma->current_buffer + 1) %
+							MAX_EP93XX_DMA_BUFFERS].size,
+				      M2M_reg_base+M2M_OFFSET_BCR1 );
+			} else {
+				/*
+				 * Set the SAR_BASE0/DAR_BASE0/BCR0 registers
+				 * with values from the next buffer in the
+				 * queue.
+				 */
+				outl( dma->buffer_queue[(dma->current_buffer + 1) %
+							MAX_EP93XX_DMA_BUFFERS].source,
+				      M2M_reg_base+M2M_OFFSET_SAR_BASE0 );
+
+				outl( dma->buffer_queue[(dma->current_buffer + 1) %
+							MAX_EP93XX_DMA_BUFFERS].dest,
+				      M2M_reg_base+M2M_OFFSET_DAR_BASE0 );
+
+				outl( dma->buffer_queue[(dma->current_buffer + 1) %
+							MAX_EP93XX_DMA_BUFFERS].size,
+				      M2M_reg_base+M2M_OFFSET_BCR0 );
+			}
+
+			/*
+			 *  Decrement the new buffers counter
+			 */
+			dma->new_buffers--;
+		}
+	} else {
+		/*
+		 * Total number of buffers is 0 - really we should never get
+		 * here, but just in case.
+		 */
+		DPRINTK("9 \n");
+
+		/*
+		 *  No new buffers to transfer, so Disable the channel
+		 */
+		uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+		uiCONTROL &= ~CONTROL_M2M_ENABLE;
+		outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+
+		/*
+		 *  Indicate that the channel is paused by starvation.
+		 */
+		dma->pause = 1;
+	}
+}
+
+/*****************************************************************************
+ *
+ * dma_m2m_irq_handler
+ *
+ ****************************************************************************/
+static irqreturn_t
+dma_m2m_irq_handler(int irq, void *dev_id)
+{
+	ep93xx_dma_t *dma = (ep93xx_dma_t *)dev_id;
+	unsigned int M2M_reg_base = dma->reg_base;
+	ep93xx_dma_dev_t dma_int = UNDEF_INT;
+	int status;
+
+//	printk("+m2m irq=%d\n", irq);
+
+	/*
+	 *  Determine what kind of dma interrupt this is.
+	 */
+	status = inl(M2M_reg_base + M2M_OFFSET_INTERRUPT);
+	if ( status & INTERRUPT_M2M_DONEINT )
+		dma_int = DONE; // we're done with a requested dma
+	else if ( status & INTERRUPT_M2M_NFBINT )
+		dma_int = NFB;  // we're done with one dma buffer
+
+	DPRINTK("IRQ: b=%#x st=%#x\n", (int)dma->current_buffer, dma_int);
+
+	switch (dma_int) {
+	/*
+	 *  Next Frame Buffer Interrupt.  If there's a new buffer program it
+	 *  Check if this is the last buffer in the transfer,
+	 *  and if it is, disable the NFB int to prevent being
+	 *  interrupted for another buffer when we know there won't be
+	 *  another.
+	 */
+	case NFB:
+		dma_m2m_next_frame_buffer(dma);
+		break;
+	/*
+	 *  Done interrupt generated, indicating that the transfer is complete.
+	 */
+	case DONE:
+		dma_m2m_transfer_done(dma);
+		break;
+
+	default:
+		break;
+	}
+
+	if ((dma_int != UNDEF_INT) && dma->callback)
+		dma->callback(dma_int, dma->device, dma->user_data);
+
+	return IRQ_HANDLED;
+}
+
+/*****************************************************************************
+ *
+ * dma_m2p_irq_handler
+ *
+ *
+ *
+ ****************************************************************************/
+static irqreturn_t
+dma_m2p_irq_handler(int irq, void *dev_id)
+{
+	ep93xx_dma_t *dma = (ep93xx_dma_t *) dev_id;
+	unsigned int M2P_reg_base = dma->reg_base;
+	unsigned int read_back;
+	ep93xx_dma_dev_t dma_int = UNDEF_INT;
+	unsigned int loop, uiCONTROL, uiINTERRUPT;
+
+	/*
+	 *  Determine what kind of dma interrupt this is.
+	 */
+	if ( inl(M2P_reg_base+M2P_OFFSET_INTERRUPT) & INTERRUPT_M2P_STALLINT )
+		dma_int = STALL;
+	else if ( inl(M2P_reg_base+M2P_OFFSET_INTERRUPT) & INTERRUPT_M2P_NFBINT )
+		dma_int = NFB;
+	else if ( inl(M2P_reg_base+M2P_OFFSET_INTERRUPT) & INTERRUPT_M2P_CHERRORINT )
+		dma_int = CHERROR;
+
+	/*
+	 *  Stall Interrupt: The Channel is stalled, meaning nothing is
+	 *  programmed to transfer right now.  So, we're back to the
+	 *  beginnning.  If there's a buffer to transfer, program it into
+	 *  max and base 0 registers.
+	 */
+	if (dma_int == STALL) {
+		DPRINTK("1  ");
+
+		if (dma->total_buffers) {
+			/*
+			 * The current_buffer has already been tranfered, so
+			 * add the byte count to the total_bytes field.
+			 */
+			dma->total_bytes = dma->total_bytes +
+				dma->buffer_queue[dma->current_buffer].size;
+
+			/*
+			 *  Mark the current_buffer as used.
+			 */
+			dma->buffer_queue[dma->current_buffer].used = TRUE;
+
+			/*
+			 *  Increment the used buffer counter
+			 */
+			dma->used_buffers++;
+
+			DPRINTK("#%d", dma->current_buffer);
+
+			/*
+			 *  Increment the current_buffer
+			 */
+			dma->current_buffer = (dma->current_buffer + 1) %
+					      MAX_EP93XX_DMA_BUFFERS;
+
+			/*
+			 *  check if there's a new buffer to transfer.
+			 */
+			if (dma->new_buffers && dma->xfer_enable) {
+				/*
+				 * We have a new buffer to transfer so program
+				 * in the buffer values.  Since a STALL
+				 * interrupt was triggered, we program the
+				 * base0 and maxcnt0
+				 *
+				 * Set the MAXCNT0 register with the buffer
+				 * size
+				 */
+				outl( dma->buffer_queue[dma->current_buffer].size,
+					  M2P_reg_base+M2P_OFFSET_MAXCNT0 );
+
+				/*
+				 * Set the BASE0 register with the buffer base
+				 * address
+				 */
+				outl( dma->buffer_queue[dma->current_buffer].source,
+					  M2P_reg_base+M2P_OFFSET_BASE0 );
+
+				/*
+				 *  Decrement the new buffer counter
+				 */
+				dma->new_buffers--;
+
+				if (dma->new_buffers) {
+					DPRINTK("A  ");
+					/*
+					 * Set the MAXCNT1 register with the
+					 * buffer size
+					 */
+					outl( dma->buffer_queue[(dma->current_buffer + 1) %
+											MAX_EP93XX_DMA_BUFFERS].size,
+						  M2P_reg_base+M2P_OFFSET_MAXCNT1 );
+
+					/*
+					 * Set the BASE1 register with the
+					 * buffer base address
+					 */
+					outl( dma->buffer_queue[dma->current_buffer + 1 %
+											MAX_EP93XX_DMA_BUFFERS].source,
+						  M2P_reg_base+M2P_OFFSET_BASE1 );
+
+					/*
+					 *  Decrement the new buffer counter
+					 */
+					dma->new_buffers--;
+
+					/*
+					 *  Enable the NFB Interrupt.
+					 */
+					uiCONTROL = inl(M2P_reg_base+M2P_OFFSET_CONTROL);
+					uiCONTROL |= CONTROL_M2P_NFBINTEN;
+					outl( uiCONTROL, M2P_reg_base+M2P_OFFSET_CONTROL );
+				}
+			} else {
+				/*
+				 *  No new buffers.
+				 */
+				DPRINTK("2 \n");
+
+				/*
+				 *  There's a chance we setup both buffer descriptors, but
+				 *  didn't service the NFB quickly enough, causing the channel
+				 *  to transfer both buffers, then enter the stall state.
+				 *  So, we need to be able to process the second buffer.
+				 */
+				if ((dma->used_buffers + dma->new_buffers) < dma->total_buffers) {
+					DPRINTK("3 ");
+
+					/*
+					 *  The current_buffer has already been tranfered, so add the
+					 *  byte count to the total_bytes field.
+					 */
+					dma->total_bytes = dma->total_bytes +
+						dma->buffer_queue[dma->current_buffer].size;
+
+					/*
+					 *  Mark the current_buffer as used.
+					 */
+					dma->buffer_queue[dma->current_buffer].used = TRUE;
+
+					/*
+					 *  Increment the used buffer counter
+					 */
+					dma->used_buffers++;
+
+					DPRINTK("#%d", dma->current_buffer);
+
+					/*
+					 *  Increment the current buffer pointer.
+					 */
+					dma->current_buffer = (dma->current_buffer + 1) %
+						MAX_EP93XX_DMA_BUFFERS;
+
+				}
+
+				/*
+				 *  No new buffers to transfer, so disable the channel.
+				 */
+				uiCONTROL = inl(M2P_reg_base+M2P_OFFSET_CONTROL);
+				uiCONTROL &= ~CONTROL_M2P_ENABLE;
+				outl( uiCONTROL, M2P_reg_base+M2P_OFFSET_CONTROL );
+
+				/*
+				 *  Indicate that this channel is in the pause by starvation
+				 *  state by setting the pause bit to true.
+				 */
+				dma->pause = TRUE;
+
+				DPRINTK("STATUS - 0x%x \n",	 inl(M2P_reg_base+M2P_OFFSET_STATUS) );
+				DPRINTK("CONTROL - 0x%x \n",	inl(M2P_reg_base+M2P_OFFSET_CONTROL) );
+				DPRINTK("REMAIN - 0x%x \n",	 inl(M2P_reg_base+M2P_OFFSET_REMAIN) );
+				DPRINTK("PPALLOC - 0x%x \n",	inl(M2P_reg_base+M2P_OFFSET_PPALLOC) );
+				DPRINTK("BASE0 - 0x%x \n",	  inl(M2P_reg_base+M2P_OFFSET_BASE0) );
+				DPRINTK("MAXCNT0 - 0x%x \n",	inl(M2P_reg_base+M2P_OFFSET_MAXCNT0) );
+				DPRINTK("CURRENT0 - 0x%x \n",   inl(M2P_reg_base+M2P_OFFSET_CURRENT0) );
+				DPRINTK("BASE1 - 0x%x \n",	  inl(M2P_reg_base+M2P_OFFSET_BASE1) );
+				DPRINTK("MAXCNT1 - 0x%x \n",	inl(M2P_reg_base+M2P_OFFSET_MAXCNT1) );
+				DPRINTK("CURRENT1 - 0x%x \n",   inl(M2P_reg_base+M2P_OFFSET_CURRENT1) );
+
+				DPRINTK("Buffer	buf_id	 source	   size	   last	   used \n");
+				for (loop = 0; loop < 32; loop ++)
+					DPRINTK("%d		0x%x		0x%x		 0x%x		%d		 %d \n",
+							loop, dma->buffer_queue[loop].buf_id, dma->buffer_queue[loop].source,
+							dma->buffer_queue[loop].size,
+							dma->buffer_queue[loop].last, dma->buffer_queue[loop].used);
+				DPRINTK("pause	 0x%x		0x%x		 0x%x		%d		 %d \n",
+						dma->pause_buf.buf_id, dma->pause_buf.source, dma->pause_buf.size,
+						dma->pause_buf.last, dma->pause_buf.used);
+
+				DPRINTK("Pause - %d \n", dma->pause);
+				DPRINTK("xfer_enable - %d \n", dma->xfer_enable);
+				DPRINTK("total bytes - 0x%x \n", dma->total_bytes);
+				DPRINTK("total buffer - %d \n", dma->total_buffers);
+				DPRINTK("new buffers - %d \n", dma->new_buffers);
+				DPRINTK("current buffer - %d \n", dma->current_buffer);
+				DPRINTK("last buffer - %d \n", dma->last_buffer);
+				DPRINTK("used buffers - %d \n", dma->used_buffers);
+				DPRINTK("callback addr - 0x%p \n", dma->callback);
+			}
+		} else {
+			/*
+			 *  No buffers to transfer, or old buffers to mark as used,
+			 *  so Disable the channel
+			 */
+			uiCONTROL = inl(M2P_reg_base+M2P_OFFSET_CONTROL);
+			uiCONTROL &= ~CONTROL_M2P_ENABLE;
+			outl( uiCONTROL, M2P_reg_base+M2P_OFFSET_CONTROL );
+
+			/*
+			 *  Must read the control register back after a write.
+			 */
+			read_back = inl(M2P_reg_base+M2P_OFFSET_CONTROL);
+
+			/*
+			 *  Indicate that this channel is in the pause by
+			 *  starvation state by setting the pause bit to true.
+			 */
+			dma->pause = TRUE;
+		}
+	}
+
+	/*
+	 *  Next Frame Buffer Interrupt.  If there's a new buffer program it
+	 *  Check if this is the last buffer in the transfer,
+	 *  and if it is, disable the NFB int to prevent being
+	 *  interrupted for another buffer when we know there won't be
+	 *  another.
+	 */
+	if (dma_int == NFB) {
+		DPRINTK("5  ");
+
+		if (dma->total_buffers) {
+			DPRINTK("6  ");
+			/*
+			 *  The iCurrentBuffer has already been transfered.  so add the
+			 *  byte count from the current buffer to the total byte count.
+			 */
+			dma->total_bytes = dma->total_bytes +
+				dma->buffer_queue[dma->current_buffer].size;
+
+			/*
+			 *  Mark the Current Buffer as used.
+			 */
+			dma->buffer_queue[dma->current_buffer].used = TRUE;
+
+			/*
+			 *  Increment the used buffer counter
+			 */
+			dma->used_buffers++;
+
+			DPRINTK("#%d", dma->current_buffer);
+
+			if ((dma->buffer_queue[
+			    (dma->current_buffer + 1) % MAX_EP93XX_DMA_BUFFERS].last) ||
+			    (dma->new_buffers == 0) || (dma->xfer_enable == FALSE)) {
+				DPRINTK("7  ");
+
+				/*
+				 *  This is the last Buffer in this transaction, so disable
+				 *  the NFB interrupt.  We shouldn't get an NFB int when the
+				 *  FSM moves to the ON state where it would typically get the
+				 *  NFB int indicating a new buffer can be programmed.
+				 *  Instead, once in the ON state, the DMA will just proceed
+				 *  to complet the transfer of the current buffer, move the
+				 *  FSB directly to the STALL state where a STALL interrupt
+				 *  will be generated.
+				 */
+				uiCONTROL = inl(M2P_reg_base+M2P_OFFSET_CONTROL);
+				uiCONTROL &= ~CONTROL_M2P_NFBINTEN;
+				outl( uiCONTROL, M2P_reg_base+M2P_OFFSET_CONTROL );
+
+				/*
+				 *  The current buffer has been transferred, so increment
+				 *  the current buffer counter to reflect this.
+				 */
+				dma->current_buffer = (dma->current_buffer + 1) % MAX_EP93XX_DMA_BUFFERS;
+
+				DPRINTK("End of NFB handling. \n");
+				DPRINTK("STATUS - 0x%x \n",	 inl(M2P_reg_base+M2P_OFFSET_STATUS) );
+				DPRINTK("CONTROL - 0x%x \n",	inl(M2P_reg_base+M2P_OFFSET_CONTROL) );
+				DPRINTK("REMAIN - 0x%x \n",	 inl(M2P_reg_base+M2P_OFFSET_REMAIN) );
+				DPRINTK("PPALLOC - 0x%x \n",	inl(M2P_reg_base+M2P_OFFSET_PPALLOC) );
+				DPRINTK("BASE0 - 0x%x \n",	  inl(M2P_reg_base+M2P_OFFSET_BASE0) );
+				DPRINTK("MAXCNT0 - 0x%x \n",	inl(M2P_reg_base+M2P_OFFSET_MAXCNT0) );
+				DPRINTK("CURRENT0 - 0x%x \n",   inl(M2P_reg_base+M2P_OFFSET_CURRENT0) );
+				DPRINTK("BASE1 - 0x%x \n",	  inl(M2P_reg_base+M2P_OFFSET_BASE1) );
+				DPRINTK("MAXCNT1 - 0x%x \n",	inl(M2P_reg_base+M2P_OFFSET_MAXCNT1) );
+				DPRINTK("CURRENT1 - 0x%x \n",   inl(M2P_reg_base+M2P_OFFSET_CURRENT1) );
+
+				DPRINTK("Buffer	buf_id	 source	   size	   last	   used \n");
+				for (loop = 0; loop < 32; loop ++)
+					DPRINTK("%d		0x%x		0x%x		 0x%x		%d		 %d \n",
+							loop, dma->buffer_queue[loop].buf_id, dma->buffer_queue[loop].source,
+							dma->buffer_queue[loop].size,
+							dma->buffer_queue[loop].last, dma->buffer_queue[loop].used);
+				DPRINTK("pause	 0x%x		0x%x		 0x%x		%d		 %d \n",
+						dma->pause_buf.buf_id, dma->pause_buf.source, dma->pause_buf.size,
+						dma->pause_buf.last, dma->pause_buf.used);
+
+				DPRINTK("Pause - %d \n", dma->pause);
+				DPRINTK("xfer_enable - %d \n", dma->xfer_enable);
+				DPRINTK("total bytes - 0x%x \n", dma->total_bytes);
+				DPRINTK("total buffer - %d \n", dma->total_buffers);
+				DPRINTK("new buffers - %d \n", dma->new_buffers);
+				DPRINTK("current buffer - %d \n", dma->current_buffer);
+				DPRINTK("last buffer - %d \n", dma->last_buffer);
+				DPRINTK("used buffers - %d \n", dma->used_buffers);
+				DPRINTK("callback addr - 0x%p \n", dma->callback);
+
+			} else if (dma->new_buffers) {
+				DPRINTK("8  ");
+				/*
+				 *  we have a new buffer, so increment the current buffer to
+				 *  point to the next buffer, which is already programmed into
+				 *  the DMA. Next time around, it'll be pointing to the
+				 *  current buffer.
+				 */
+				dma->current_buffer = (dma->current_buffer + 1) % MAX_EP93XX_DMA_BUFFERS;
+
+				/*
+				 *  we know we have a new buffer to program as the next
+				 *  buffer, so check which set of MAXCNT and BASE registers
+				 *  to program.
+				 */
+				if ( inl(M2P_reg_base+M2P_OFFSET_STATUS) & STATUS_M2P_NEXTBUFFER ) {
+					/*
+					 *  Set the MAXCNT1 register with the buffer size
+					 */
+					outl( dma->buffer_queue[
+					      (dma->current_buffer + 1) % MAX_EP93XX_DMA_BUFFERS].size,
+					      M2P_reg_base+M2P_OFFSET_MAXCNT1 );
+
+					/*
+					 *  Set the BASE1 register with the buffer base address
+					 */
+					outl( dma->buffer_queue[
+					      (dma->current_buffer + 1) % MAX_EP93XX_DMA_BUFFERS].source,
+					      M2P_reg_base+M2P_OFFSET_BASE1 );
+				} else {
+					/*
+					 *  Set the MAXCNT0 register with the buffer size
+					 */
+					outl( dma->buffer_queue[
+					      (dma->current_buffer + 1) % MAX_EP93XX_DMA_BUFFERS].size,
+					       M2P_reg_base+M2P_OFFSET_MAXCNT0 );
+
+					/*
+					 *  Set the BASE0 register with the buffer base address
+					 */
+					outl( dma->buffer_queue[
+					      (dma->current_buffer + 1) % MAX_EP93XX_DMA_BUFFERS].source,
+					      M2P_reg_base+M2P_OFFSET_BASE0 );
+				}
+
+				/*
+				 *  Decrement the new buffers counter
+				 */
+				dma->new_buffers--;
+			}
+		} else {
+			/*
+			 *  Total number of buffers is 0 - really we should never get here,
+			 *  but just in case.
+			 */
+			DPRINTK("9 \n");
+
+			/*
+			 *  No new buffers to transfer, so Disable the channel
+			 */
+			uiCONTROL = inl(M2P_reg_base+M2P_OFFSET_CONTROL);
+			uiCONTROL &= ~CONTROL_M2P_ENABLE;
+			outl( uiCONTROL, M2P_reg_base+M2P_OFFSET_CONTROL );
+		}
+	}
+
+	/*
+	 *  Channel Error Interrupt, or perhipheral interrupt, specific to the
+	 *  memory to/from peripheral channels.
+	 */
+	if (dma_int == CHERROR) {
+		/*
+		 *  just clear the interrupt, it's really up to the peripheral
+		 *  driver to determine if any further action is necessary.
+		 */
+		uiINTERRUPT = inl(M2P_reg_base+M2P_OFFSET_INTERRUPT);
+		uiINTERRUPT &= ~INTERRUPT_M2P_CHERRORINT;
+		outl( uiINTERRUPT, M2P_reg_base+M2P_OFFSET_INTERRUPT );
+	}
+
+	/*
+	 *  Make sure the interrupt was valid, and if it was, then check
+	 *  if a callback function was installed for this DMA channel.  If a
+	 *  callback was installed call it.
+	 */
+	if ((dma_int != UNDEF_INT) && dma->callback)
+		dma->callback(dma_int, dma->device, dma->user_data);
+
+	return IRQ_HANDLED;
+}
+
+/*****************************************************************************
+ *
+ * ep9312_dma_open_m2p(int device)
+ *
+ * Description: This function will attempt to open a M2P/P2M DMA channel.
+ *			  If the open is successful, the channel number is returned,
+ *			  otherwise a negative number is returned.
+ *
+ * Parameters:
+ *  device:	 device for which the dma channel is requested.
+ *
+ ****************************************************************************/
+static int
+dma_open_m2p(int device)
+{
+	int channel = -1;
+	unsigned int loop;
+	unsigned int M2P_reg_base;
+	unsigned int uiPWRCNT;
+	/*unsigned long flags;*/
+
+	DPRINTK("DMA Open M2P with hw dev %d\n", device);
+
+	/*
+	 *  Lock the dma channel list.
+	 */
+	//spin_lock_irqsave(&dma_list_lock, flags);
+	spin_lock(&dma_list_lock);
+
+	/*
+	 * Verify that the device requesting DMA isn't already using a DMA channel
+	 */
+	if (device >= 10)
+		loop = 1;		 // Rx transfer requested
+	else
+		loop = 0;		 // Tx transfer requested
+
+	for (; loop < 10; loop = loop + 2)
+		/*
+		 *  Before checking for a matching device, check that the
+		 *  channel is in use, otherwise the device field is
+		 *  invalid.
+		 */
+		if (dma_chan[loop].ref_count)
+			if (device == dma_chan[loop].device) {
+				DPRINTK("DMA Open M2P - Error\n");
+				return(-1);
+			}
+
+	/*
+	 *  Get a DMA channel instance for the given hardware device.
+	 *  If this is a TX look for even numbered channels, else look for
+	 *  odd numbered channels
+	 */
+	if (device >= 10)
+		loop = 1;		 /* Rx transfer requested */
+	else
+		loop = 0;		 /* Tx transfer requested */
+
+	for (; loop < 10; loop = loop + 2)
+		if (!dma_chan[loop].ref_count) {
+			/*
+			 *  Capture the channel and increment the reference count.
+			 */
+			channel = loop;
+			dma_chan[channel].ref_count++;
+			break;
+		}
+
+	/*
+	 *  Unlock the dma channel list.
+	 */
+	//spin_unlock_irqrestore(&dma_list_lock, flags);
+	spin_unlock(&dma_list_lock);
+	/*
+	 *  See if we got a valid channel.
+	 */
+	if (channel < 0)
+		return(-1);
+
+	/*
+	 *  Point regs to the correct dma channel register base.
+	 */
+	M2P_reg_base = dma_chan[channel].reg_base;
+
+	/*
+	 *  Turn on the clock for the specified DMA channel
+	 *  TODO: need to use the correct register name for the
+	 *  power control register.
+	 */
+	uiPWRCNT = inl(/*SYSCON_PWRCNT*/EP93XX_SYSCON_CLOCK_CONTROL);
+	switch (channel) {
+	case 0:
+		uiPWRCNT |= SYSCON_PWRCNT_DMA_M2PCH0;
+		break;
+
+	case 1:
+		uiPWRCNT |= SYSCON_PWRCNT_DMA_M2PCH1;
+		break;
+
+	case 2:
+		uiPWRCNT |= SYSCON_PWRCNT_DMA_M2PCH2;
+		break;
+
+	case 3:
+		uiPWRCNT |= SYSCON_PWRCNT_DMA_M2PCH3;
+		break;
+
+	case 4:
+		uiPWRCNT |= SYSCON_PWRCNT_DMA_M2PCH4;
+		break;
+
+	case 5:
+		uiPWRCNT |= SYSCON_PWRCNT_DMA_M2PCH5;
+		break;
+
+	case 6:
+		uiPWRCNT |= SYSCON_PWRCNT_DMA_M2PCH6;
+		break;
+
+	case 7:
+		uiPWRCNT |= SYSCON_PWRCNT_DMA_M2PCH7;
+		break;
+
+	case 8:
+		uiPWRCNT |= SYSCON_PWRCNT_DMA_M2PCH8;
+		break;
+
+	case 9:
+		uiPWRCNT |= SYSCON_PWRCNT_DMA_M2PCH9;
+		break;
+
+	default:
+		return(-1);
+	}
+	outl( uiPWRCNT, /*SYSCON_PWRCNT*/EP93XX_SYSCON_CLOCK_CONTROL );
+
+	/*
+	 *  Clear out the control register before any further setup.
+	 */
+	outl( 0, M2P_reg_base+M2P_OFFSET_CONTROL );
+
+	/*
+	 *  Setup the peripheral port value in the DMA channel registers.
+	 */
+	if (device < 10)
+		outl( (unsigned int)device, M2P_reg_base+M2P_OFFSET_PPALLOC );
+	else
+		outl( (unsigned int)(device - 10), M2P_reg_base+M2P_OFFSET_PPALLOC );
+
+	/*
+	 *  Let's hold on to the value of the Hw device for comparison later.
+	 */
+	dma_chan[channel].device = device;
+
+	/*
+	 *  Success.
+	 */
+	return(channel);
+}
+
+/*****************************************************************************
+ *
+ * dma_open_m2m(int device)
+ *
+ * Description: This function will attempt to open a M2M DMA channel.
+ *			  If the open is successful, the channel number is returned,
+ *			  otherwise a negative number is returned.
+ *
+ * Parameters:
+ *  device:	 device for which the dma channel is requested.
+ *
+ ****************************************************************************/
+static int
+dma_open_m2m(int device)
+{
+	int channel = -1;
+	unsigned int loop;
+	unsigned int M2M_reg_base;
+	unsigned int uiPWRCNT, uiCONTROL;
+	/*unsigned long flags;*/
+
+	DPRINTK("DMA Open M2M with hw dev %d\n", device);
+
+	/*
+	 *  Lock the dma channel list.
+	 */
+	//spin_lock_irqsave(&dma_list_lock, flags);
+	spin_lock(&dma_list_lock);
+
+
+	/*
+	 *  Check if this device is already allocated a channel.
+	 *  TODO: can one M2M device be allocated multiple channels?
+	 */
+	for (loop = DMA_MEMORY; loop < UNDEF; loop++)
+		/*
+		 *  Before checking for a matching device, check that the
+		 *  channel is in use, otherwise the device field is
+		 *  invalid.
+		 */
+		if (dma_chan[loop].ref_count)
+			if (device == dma_chan[loop].device) {
+				DPRINTK("Error - dma_open_m2m - already allocated channel\n");
+
+				/*
+				 *  Unlock the dma channel list.
+				 */
+				//spin_unlock_irqrestore(&dma_list_lock, flags);
+				spin_unlock(&dma_list_lock);
+				/*
+				 *  Fail.
+				 */
+				return(-1);
+			}
+
+	/*
+	 *  Get a DMA channel instance for the given hardware device.
+	 */
+	for (loop = 10; loop < 12; loop++)
+		if (!dma_chan[loop].ref_count) {
+			/*
+			 *  Capture the channel and increment the reference count.
+			 */
+			channel = loop;
+			dma_chan[channel].ref_count++;
+			break;
+		}
+
+	/*
+	 *  Unlock the dma channel list.
+	 */
+	//spin_unlock(dma_list_lock);
+	spin_unlock(&dma_list_lock);
+	//spin_unlock_irqrestore(&dma_list_lock, flags);
+
+	/*
+	 *  See if we got a valid channel.
+	 */
+	if (channel < 0)
+		return(-1);
+
+	/*
+	 *  Point regs to the correct dma channel register base.
+	 */
+	M2M_reg_base = dma_chan[channel].reg_base;
+
+	/*
+	 *  Turn on the clock for the specified DMA channel
+	 *  TODO: need to use the correct register name for the
+	 *  power control register.
+	 */
+	uiPWRCNT = inl(/*SYSCON_PWRCNT*/EP93XX_SYSCON_CLOCK_CONTROL);
+	switch (channel) {
+	case 10:
+		uiPWRCNT |= SYSCON_PWRCNT_DMA_M2MCH0;
+		break;
+
+	case 11:
+		uiPWRCNT |= SYSCON_PWRCNT_DMA_M2MCH1;
+		break;
+
+	default:
+		return(-1);
+	}
+	outl( uiPWRCNT, /*SYSCON_PWRCNT*/EP93XX_SYSCON_CLOCK_CONTROL);
+
+	DPRINTK("DMA Open - power control: 0x%x \n", inl(SYSCON_PWRCNT) );
+
+	/*
+	 *  Clear out the control register before any further setup.
+	 */
+	outl( 0, M2M_reg_base+M2M_OFFSET_CONTROL );
+
+	/*
+	 *  Setup the transfer mode and the request source selection within
+	 *  the DMA M2M channel registers.
+	 */
+	switch (device) {
+	case DMA_MEMORY:
+		/*
+		 * Clear TM field, set RSS field to 0
+		 */
+		uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+		uiCONTROL &= ~(CONTROL_M2M_TM_MASK | CONTROL_M2M_RSS_MASK);
+		outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+		break;
+
+	case DMA_IDE:
+		/*
+		 * Set RSS field to 3, Set NO_HDSK, Set PW field to 1
+		 */
+		uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+		uiCONTROL &= ~(CONTROL_M2M_RSS_MASK|CONTROL_M2M_PW_MASK);
+		uiCONTROL |= (3<<CONTROL_M2M_RSS_SHIFT) |
+			CONTROL_M2M_NO_HDSK |
+			(2<<CONTROL_M2M_PW_SHIFT);
+
+		uiCONTROL &= ~(CONTROL_M2M_ETDP_MASK);
+		uiCONTROL &= ~(CONTROL_M2M_DACKP);
+		uiCONTROL &= ~(CONTROL_M2M_DREQP_MASK);
+
+		outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+		inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+		break;
+
+	case DMARx_SSP:
+		/*
+		 * Set RSS field to 1, Set NO_HDSK, Set TM field to 2
+		 */
+		uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+		uiCONTROL &= ~(CONTROL_M2M_RSS_MASK|CONTROL_M2M_TM_MASK);
+		uiCONTROL |= (1<<CONTROL_M2M_RSS_SHIFT) |
+			CONTROL_M2M_NO_HDSK |
+			(2<<CONTROL_M2M_TM_SHIFT);
+		outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+		break;
+
+	case DMATx_SSP:
+		/*
+		 * Set RSS field to 2, Set NO_HDSK, Set TM field to 1
+		 */
+		uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+		uiCONTROL &= ~(CONTROL_M2M_RSS_MASK|CONTROL_M2M_TM_MASK);
+		uiCONTROL |= (2<<CONTROL_M2M_RSS_SHIFT) |
+			CONTROL_M2M_NO_HDSK |
+			(1<<CONTROL_M2M_TM_SHIFT);
+		outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+		break;
+
+	case DMATx_EXT_DREQ:
+		/*
+		 * Set TM field to 2, set RSS field to 0
+		 */
+		uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+		uiCONTROL &= ~(CONTROL_M2M_RSS_MASK|CONTROL_M2M_TM_MASK);
+		uiCONTROL |= 1<<CONTROL_M2M_TM_SHIFT;
+		outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+		break;
+
+	case DMARx_EXT_DREQ:
+		/*
+		 * Set TM field to 2, set RSS field to 0
+		 */
+		uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+		uiCONTROL &= ~(CONTROL_M2M_RSS_MASK|CONTROL_M2M_TM_MASK);
+		uiCONTROL |= 2<<CONTROL_M2M_TM_SHIFT;
+		outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+		break;
+
+	default:
+		return -1;
+	}
+
+	/*
+	 *  Let's hold on to the value of the Hw device for comparison later.
+	 */
+	dma_chan[channel].device = device;
+
+	/*
+	 *  Success.
+	 */
+	return(channel);
+}
+
+/*****************************************************************************
+ *
+ *  int dma_config_m2m(ep93xx_dma_t * dma, unsigned int flags_m2m,
+ *			   dma_callback callback, unsigned int user_data)
+ *
+ *  Description: Configure the DMA channel and install a callback function.
+ *			   This function will have to be called for every transfer
+ *
+ *  dma:		Pointer to the dma instance data for the M2M channel to
+ *			  configure.
+ *  flags_m2m   Flags used to configure an M2M dma channel and determine
+ *			  if a callback function and user_data information are included
+ *			  in this call.
+ *  callback	function pointer which is called near the end of the
+ *			  dma channel's irq handler.
+ *  user_data   defined by the calling driver.
+ *
+ ****************************************************************************/
+static int
+dma_config_m2m(ep93xx_dma_t * dma, unsigned int flags_m2m,
+			   dma_callback callback, unsigned int user_data)
+{
+	unsigned long flags;
+	unsigned int M2M_reg_base, uiCONTROL;
+
+	/*
+	 *  Make sure the channel is disabled before configuring the channel.
+	 *
+	 *  TODO: Is this correct??   Making a big change here...
+	 */
+	/* if (!dma->pause || (!dma->pause && dma->xfer_enable)) */
+	if (dma->xfer_enable) {
+		/*
+		 *  DMA channel is not paused, so we can't configure it.
+		 */
+		DPRINTK("DMA channel not paused, so can't configure! \n");
+		return(-1);
+	}
+
+	/*
+	 *  Mask interrupts.
+	 */
+	local_irq_save(flags);
+
+	/*
+	 *  Setup a pointer into the dma channel's register set.
+	 */
+	M2M_reg_base = dma->reg_base;
+
+	uiCONTROL = inl(M2M_reg_base + M2M_OFFSET_CONTROL);
+	outl(0, M2M_reg_base + M2M_OFFSET_CONTROL);
+	inl(M2M_reg_base + M2M_OFFSET_CONTROL);
+	outl(uiCONTROL, M2M_reg_base + M2M_OFFSET_CONTROL);
+
+	/*
+	 *  By default we disable the stall interrupt.
+	 */
+	uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+	uiCONTROL &= ~CONTROL_M2M_STALLINTEN;
+	outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+
+	/*
+	 *  By default we disable the done interrupt.
+	 */
+	uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+	uiCONTROL &= ~CONTROL_M2M_DONEINTEN;
+	outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+
+	/*
+	 *  Set up the transfer control fields based on values passed in
+	 *  the flags_m2m field.
+	 */
+	uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+
+	if ( flags_m2m & DESTINATION_HOLD )
+		uiCONTROL |= CONTROL_M2M_DAH;
+	else
+		uiCONTROL &= ~CONTROL_M2M_DAH;
+
+	if ( flags_m2m & SOURCE_HOLD )
+		uiCONTROL |= CONTROL_M2M_SAH;
+	else
+		uiCONTROL &= ~CONTROL_M2M_SAH;
+
+	uiCONTROL &= ~CONTROL_M2M_TM_MASK;
+	uiCONTROL |= (((flags_m2m & TRANSFER_MODE_MASK) >> TRANSFER_MODE_SHIFT) <<
+				  CONTROL_M2M_TM_SHIFT) & CONTROL_M2M_TM_MASK;
+
+	uiCONTROL &= ~CONTROL_M2M_PWSC_MASK;
+	uiCONTROL |= (((flags_m2m & WAIT_STATES_MASK) >> WAIT_STATES_SHIFT) <<
+				  CONTROL_M2M_PWSC_SHIFT) & CONTROL_M2M_PWSC_MASK;
+
+	outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+	inl(M2M_reg_base + M2M_OFFSET_CONTROL);
+
+	/*
+	 *  Save the callback function in the dma instance for this channel.
+	 */
+	dma->callback = callback;
+
+	/*
+	 *  Save the user data in the the dma instance for this channel.
+	 */
+	dma->user_data = user_data;
+
+	/*
+	 *  Put the dma instance into the pause state by setting the
+	 *  pause bit to true.
+	 */
+	dma->pause = TRUE;
+
+	local_irq_restore(flags);
+
+	/*
+	 *  Success.
+	 */
+	return(0);
+}
+
+/*****************************************************************************
+ *
+ *  int dma_start(int handle, unsigned int channels, unsigned int * handles)
+ *
+ *  Description: Initiate a transfer on up to 3 channels.
+ *
+ *  handle:	 handle for the channel to initiate transfer on.
+ *  channels:   number of channels to initiate transfers on.
+ *  handles:	pointer to an array of handles, one for each channel which
+ *			   is to be started.
+ *
+ ****************************************************************************/
+static int
+dma_start_m2m(int channel, ep93xx_dma_t * dma)
+{
+	unsigned long flags;
+	unsigned int M2M_reg_base = dma->reg_base;
+	unsigned int uiCONTROL;
+
+	/*
+	 *  Mask interrupts while we get this started.
+	 */
+	local_irq_save(flags);
+
+	/*
+	 *  Make sure the channel has at least one buffer in the queue.
+	 */
+	if (dma->new_buffers < 1) {
+		/*
+		 *  Unmask irqs
+		 */
+		local_irq_restore(flags);
+
+		DPRINTK("DMA Start: Channel starved.\n");
+
+		/*
+		 *  This channel does not have enough buffers queued up,
+		 *  so enter the pause by starvation state.
+		 */
+		dma->xfer_enable = TRUE;
+		dma->pause = TRUE;
+
+		/*
+		 *  Success.
+		 */
+		return(0);
+	}
+
+	/*
+	 *  Clear any pending interrupts.
+	 */
+	outl(0x0, M2M_reg_base+M2M_OFFSET_INTERRUPT);
+
+	/*
+	 *  Set up one or both buffer descriptors with values from the next one or
+	 *  two buffers in the queue.  By default disable the next frame buffer
+	 *  interrupt on the channel.
+	 */
+	uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+	uiCONTROL &= ~CONTROL_M2M_NFBINTEN;
+	outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+
+	/*
+	 * enable the done interrupt.
+	 */
+	uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+	uiCONTROL |= CONTROL_M2M_DONEINTEN;
+	outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+
+	/*
+	 *  Update the dma channel instance transfer state.
+	 */
+	dma->xfer_enable = TRUE;
+	dma->pause = FALSE;
+
+	/*
+	 *  Program up the first buffer descriptor with a source and destination
+	 *  and a byte count.
+	 */
+	outl( dma->buffer_queue[dma->current_buffer].source,
+	      M2M_reg_base+M2M_OFFSET_SAR_BASE0 );
+
+	outl( dma->buffer_queue[dma->current_buffer].dest,
+	      M2M_reg_base+M2M_OFFSET_DAR_BASE0 );
+
+	outl( dma->buffer_queue[dma->current_buffer].size,
+	      M2M_reg_base+M2M_OFFSET_BCR0 );
+
+	/*
+	 *  Decrement the new buffers counter.
+	 */
+	dma->new_buffers--;
+
+	/*
+	 * Set up the second buffer descriptor with a second buffer if we have
+	 * a second buffer.
+	 */
+	if (dma->new_buffers) {
+		outl( dma->buffer_queue[(dma->current_buffer + 1) %
+					MAX_EP93XX_DMA_BUFFERS].source,
+		      M2M_reg_base+M2M_OFFSET_SAR_BASE1 );
+
+		outl( dma->buffer_queue[(dma->current_buffer + 1) %
+					MAX_EP93XX_DMA_BUFFERS].dest,
+		      M2M_reg_base+M2M_OFFSET_DAR_BASE1 );
+
+		outl( dma->buffer_queue[(dma->current_buffer + 1) %
+					MAX_EP93XX_DMA_BUFFERS].size,
+		      M2M_reg_base+M2M_OFFSET_BCR1 );
+
+		uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+		uiCONTROL |= CONTROL_M2M_NFBINTEN;
+		outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+
+		dma->new_buffers--;
+	}
+
+	/*
+	 *  Now we enable the channel.  This initiates the transfer.
+	 */
+	uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+	uiCONTROL |= CONTROL_M2M_ENABLE;
+	outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+	inl(M2M_reg_base + M2M_OFFSET_CONTROL);
+
+	/*
+	 *  If this is a memory to memory transfer, we need to s/w trigger the
+	 *  transfer by setting the start bit within the control register.
+	 */
+	if (dma->device == DMA_MEMORY) {
+		uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+		uiCONTROL |= CONTROL_M2M_START;
+		outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+	}
+
+	DPRINTK("DMA - It's been started!!");
+	DPRINTK("CONTROL - 0x%x \n",	inl(M2M_reg_base+M2M_OFFSET_CONTROL) );
+	DPRINTK("STATUS - 0x%x \n",	 inl(M2M_reg_base+M2M_OFFSET_STATUS) );
+	DPRINTK("BCR0 - 0x%x \n",	   dma->buffer_queue[dma->current_buffer].size);
+	DPRINTK("SAR_BASE0 - 0x%x \n",  inl(M2M_reg_base+M2M_OFFSET_SAR_BASE0) );
+	DPRINTK("SAR_CUR0 - 0x%x \n",   inl(M2M_reg_base+M2M_OFFSET_SAR_CURRENT0) );
+	DPRINTK("DAR_BASE0 - 0x%x \n",  inl(M2M_reg_base+M2M_OFFSET_DAR_BASE0) );
+	DPRINTK("DAR_CUR0 - 0x%x \n",   inl(M2M_reg_base+M2M_OFFSET_DAR_CURRENT0) );
+
+	/*
+	 *  Unmask irqs
+	 */
+	local_irq_restore(flags);
+
+	/*
+	 *  Success.
+	 */
+	return(0);
+}
+
+/*****************************************************************************
+ *
+ *  DMA interface functions
+ *
+ ****************************************************************************/
+
+/*****************************************************************************
+ *
+ *  int dma_init(int handle, unsigned int flags_m2p, unsigned int flags_m2m,
+ *			   dma_callback callback, unsigned int user_data)
+ *
+ *  Description: Configure the DMA channel and install a callback function.
+ *
+ *  handle:	 Handle unique the each instance of the dma interface, used
+ *			  to verify this call.
+ *  flags_m2p   Flags used to configure an M2P/P2M dma channel and determine
+ *			  if a callback function and user_data information are included
+ *			  in this call. This field should be NULL if handle represents
+ *			  an M2M channel.
+ *  flags_m2m   Flags used to configure an M2M dma channel and determine
+ *			  if a callback function and user_data information are included
+ *			  in this call. This field should be NULL if handle represents
+ *			  an M2P/P2M channel.
+ *  callback	function pointer which is called near the end of the
+ *			  dma channel's irq handler.
+ *  user_data   defined by the calling driver.
+ *
+ ****************************************************************************/
+int
+ep93xx_dma_config(int handle, unsigned int flags_m2p, unsigned int flags_m2m,
+		  dma_callback callback, unsigned int user_data)
+{
+	int  channel;
+	ep93xx_dma_t * dma;
+	unsigned long flags;
+	unsigned int M2P_reg_base, uiCONTROL;
+
+	/*
+	 *  Get the DMA hw channel # from the handle.
+	 */
+	channel = dma_get_channel_from_handle(handle);
+
+	/*
+	 *  See if this is a valid handle.
+	 */
+	if (channel < 0) {
+		printk(KERN_ERR
+			   "DMA Config: Invalid dma handle.\n");
+		return(-EINVAL);
+	}
+
+	DPRINTK("DMA Config \n");
+
+	dma = &dma_chan[channel];
+
+	local_irq_save(flags);
+
+	/*
+	 *  Check if the channel is currently transferring.
+	 */
+	if (dma->xfer_enable) {
+		local_irq_restore(flags);
+		return(-EINVAL);
+	}
+
+	/*
+	 *  Check if this is an m2m function.
+	 */
+	if (channel >= 10) {
+		local_irq_restore(flags);
+
+		/*
+		 *  Call another function to handle m2m config.
+		 */
+		return(dma_config_m2m(dma, flags_m2m, callback, user_data));
+	}
+
+	/*
+	 *  Setup a pointer into the dma channel's register set.
+	 */
+	M2P_reg_base = dma->reg_base;
+
+	/*
+	 *  By default we enable the stall interrupt.
+	 */
+	uiCONTROL = inl(M2P_reg_base+M2P_OFFSET_CONTROL);
+	uiCONTROL |= CONTROL_M2P_STALLINTEN;
+	outl( uiCONTROL, M2P_reg_base+M2P_OFFSET_CONTROL );
+
+	/*
+	 *  Configure the channel for an error from the peripheral.
+	 */
+	uiCONTROL = inl(M2P_reg_base+M2P_OFFSET_CONTROL);
+	if ( flags_m2p && CHANNEL_ERROR_INT_ENABLE )
+		uiCONTROL |= CONTROL_M2P_CHERRORINTEN;
+	else
+		uiCONTROL &= ~CONTROL_M2P_CHERRORINTEN;
+	outl( uiCONTROL, M2P_reg_base+M2P_OFFSET_CONTROL );
+
+	uiCONTROL = inl(M2P_reg_base+M2P_OFFSET_CONTROL);
+	if ( flags_m2p && CHANNEL_ABORT )
+		uiCONTROL |= CONTROL_M2P_ABRT;
+	else
+		uiCONTROL &= ~CONTROL_M2P_ABRT;
+	outl( uiCONTROL, M2P_reg_base+M2P_OFFSET_CONTROL );
+
+	uiCONTROL = inl(M2P_reg_base+M2P_OFFSET_CONTROL);
+	if ( flags_m2p && IGNORE_CHANNEL_ERROR )
+		uiCONTROL |= CONTROL_M2P_ICE;
+	else
+		uiCONTROL &= ~CONTROL_M2P_ICE;
+	outl( uiCONTROL, M2P_reg_base+M2P_OFFSET_CONTROL );
+
+	/*
+	 *  Save the callback function in the dma instance for this channel.
+	 */
+	dma->callback = callback;
+
+	/*
+	 *  Save the user data in the the dma instance for this channel.
+	 */
+	dma->user_data = user_data;
+
+	/*
+	 *  Put the dma instance into the pause state by setting the
+	 *  pause bit to true.
+	 */
+	dma->pause = TRUE;
+
+	local_irq_restore(flags);
+
+	/*
+	 *  Success.
+	 */
+	return(0);
+}
+
+/*****************************************************************************
+ *
+ *  int dma_start(int handle, unsigned int channels, unsigned int * handles)
+ *
+ *  Description: Initiate a transfer on up to 3 channels.
+ *
+ *  handle:	 handle for the channel to initiate transfer on.
+ *  channels:   number of channels to initiate transfers on.
+ *  handles:	pointer to an array of handles, one for each channel which
+ *			   is to be started.
+ *
+ ****************************************************************************/
+int
+ep93xx_dma_start(int handle, unsigned int channels, unsigned int * handles)
+{
+	ep93xx_dma_t * dma_pointers[3];
+	unsigned int M2P_reg_bases[3];
+	unsigned int loop, uiCONTROL;
+	unsigned long flags;
+	int  channel;
+
+	/*
+	 *  Get the DMA hw channel # from the handle.
+	 */
+	channel = dma_get_channel_from_handle(handle);
+
+	/*
+	 *  See if this is a valid handle.
+	 */
+	if (channel < 0) {
+		printk(KERN_ERR "DMA Start: Invalid dma handle.\n");
+		return(-EINVAL);
+	}
+
+	if (channels < 1) {
+		printk(KERN_ERR "DMA Start: Invalid parameter.\n");
+		return(-EINVAL);
+	}
+
+	DPRINTK("DMA Start \n");
+
+	/*
+	 *  Mask off registers.
+	 */
+	local_irq_save(flags);
+
+	/*
+	 *  Check if this is a start multiple.
+	 */
+	if (channels > 1) {
+		DPRINTK("DMA ERROR: Start, multiple start not supported yet \n");
+		return(-1);
+	} else {
+		/*
+		 *  Check if this channel is already transferring.
+		 */
+		if (dma_chan[channel].xfer_enable && !dma_chan[channel].pause) {
+			printk(KERN_ERR
+				   "DMA Start: Invalid command for channel %d.\n", channel);
+
+			/*
+			 *  Unmask irqs
+			 */
+			local_irq_restore(flags);
+
+			/*
+			 *  This channel is already transferring, so return an error.
+			 */
+			return(-EINVAL);
+		}
+
+		/*
+		 *  If this is an M2M channel, call a different function.
+		 */
+		if (channel >= 10) {
+			/*
+			 *  Unmask irqs
+			 */
+			local_irq_restore(flags);
+
+			/*
+			 *  Call the m2m start function.  Only start one channel.
+			 */
+			return(dma_start_m2m(channel, &dma_chan[channel]));
+		}
+
+		/*
+		 *  Make sure the channel has at least one buffer in the queue.
+		 */
+		if (dma_chan[channel].new_buffers < 1) {
+			DPRINTK("DMA Start: Channel starved.\n");
+
+			/*
+			 *  This channel does not have enough buffers queued up,
+			 *  so enter the pause by starvation state.
+			 */
+			dma_chan[channel].xfer_enable = TRUE;
+			dma_chan[channel].pause = TRUE;
+
+			/*
+			 *  Unmask irqs
+			 */
+			local_irq_restore(flags);
+
+			/*
+			 *  Success.
+			 */
+			return(0);
+		}
+
+		/*
+		 *  Set up a dma instance pointer for this dma channel.
+		 */
+		dma_pointers[0] = &dma_chan[channel];
+
+		/*
+		 * Set up a pointer to the register set for this channel.
+		 */
+		M2P_reg_bases[0] = dma_pointers[0]->reg_base;
+	}
+
+	/*
+	 *  Setup both MAXCNT registers with values from the next two buffers
+	 *  in the queue, and enable the next frame buffer interrupt on the channel.
+	 */
+	for (loop = 0; loop < channels; loop++) {
+		/*
+		 *  Check if we need to restore a paused transfer.
+		 */
+		if (dma_pointers[loop]->pause_buf.buf_id != -1)
+			outl( dma_pointers[loop]->pause_buf.size,
+			      M2P_reg_bases[loop]+M2P_OFFSET_MAXCNT0 );
+		else
+			outl( dma_pointers[loop]->buffer_queue[dma_pointers[loop]->current_buffer].size,
+			      M2P_reg_bases[loop]+M2P_OFFSET_MAXCNT0 );
+	}
+
+	for (loop = 0; loop < channels; loop++) {
+		/*
+		 *  Enable the specified dma channels.
+		 */
+		uiCONTROL = inl(M2P_reg_bases[loop]+M2P_OFFSET_CONTROL);
+		uiCONTROL |= CONTROL_M2P_ENABLE;
+		outl( uiCONTROL, M2P_reg_bases[loop]+M2P_OFFSET_CONTROL );
+
+		/*
+		 *  Update the dma channel instance transfer state.
+		 */
+		dma_pointers[loop]->xfer_enable = TRUE;
+		dma_pointers[loop]->pause = FALSE;
+	}
+
+	/*
+	 *  Program up the BASE0 registers for all specified channels, this
+	 *  will initiate transfers on all specified channels.
+	 */
+	for (loop = 0; loop < channels; loop++)
+		/*
+		 *  Check if we need to restore a paused transfer.
+		 */
+		if (dma_pointers[loop]->pause_buf.buf_id != -1) {
+			outl( dma_pointers[loop]->pause_buf.source,
+			      M2P_reg_bases[loop]+M2P_OFFSET_BASE0 );
+
+			/*
+			 *  Set the pause buffer to NULL
+			 */
+			dma_pointers[loop]->pause_buf.buf_id = -1;
+			dma_pointers[loop]->pause_buf.size = 0;
+		} else if(dma_pointers[loop]->new_buffers){
+			outl( dma_pointers[loop]->buffer_queue[
+				  dma_pointers[loop]->current_buffer].source,
+			      M2P_reg_bases[loop]+M2P_OFFSET_BASE0 );
+            dma_pointers[loop]->new_buffers--;
+            
+          }
+
+	/*
+	 *  Before restoring irqs setup the second MAXCNT/BASE
+	 *  register with a second buffer.
+	 */
+	for (loop = 0; loop < channels; loop++)
+		if (dma_pointers[loop]->new_buffers) {
+        	/*
+        	 *  By default we enable the next frame buffer interrupt.
+        	 */
+        	uiCONTROL = inl(M2P_reg_bases[loop]+M2P_OFFSET_CONTROL);
+        	uiCONTROL |= CONTROL_M2P_NFBINTEN;
+        	outl( uiCONTROL, M2P_reg_bases[loop]+M2P_OFFSET_CONTROL );
+
+			outl( dma_pointers[loop]->buffer_queue[
+				  (dma_pointers[loop]->current_buffer + 1) %
+				  MAX_EP93XX_DMA_BUFFERS].size,
+			      M2P_reg_bases[loop]+M2P_OFFSET_MAXCNT1 );
+
+			outl( dma_pointers[loop]->buffer_queue[
+				  (dma_pointers[loop]->current_buffer + 1) %
+				  MAX_EP93XX_DMA_BUFFERS].source,
+			      M2P_reg_bases[loop]+M2P_OFFSET_BASE1 );
+            dma_pointers[loop]->new_buffers--;
+		}
+
+	/*
+	  DPRINTK("DMA - It's been started!!");
+	  DPRINTK("STATUS - 0x%x \n",	 inl(M2P_reg_base+M2P_OFFSET_STATUS) );
+	  DPRINTK("CONTROL - 0x%x \n",	inl(M2P_reg_base+M2P_OFFSET_CONTROL) );
+	  DPRINTK("REMAIN - 0x%x \n",	 inl(M2P_reg_base+M2P_OFFSET_REMAIN) );
+	  DPRINTK("PPALLOC - 0x%x \n",	inl(M2P_reg_base+M2P_OFFSET_PPALLOC) );
+	  DPRINTK("BASE0 - 0x%x \n",	  inl(M2P_reg_base+M2P_OFFSET_BASE0) );
+	  DPRINTK("MAXCNT0 - 0x%x \n",	inl(M2P_reg_base+M2P_OFFSET_MAXCNT0) );
+	  DPRINTK("CURRENT0 - 0x%x \n",   inl(M2P_reg_base+M2P_OFFSET_CURRENT0) );
+	  DPRINTK("BASE1 - 0x%x \n",	  inl(M2P_reg_base+M2P_OFFSET_BASE1) );
+	  DPRINTK("MAXCNT1 - 0x%x \n",	inl(M2P_reg_base+M2P_OFFSET_MAXCNT1) );
+	  DPRINTK("CURRENT1 - 0x%x \n",   inl(M2P_reg_base+M2P_OFFSET_CURRENT1) );
+
+	  DPRINTK("Pause - %d \n", dma_pointers[0]->pause);
+	  DPRINTK("xfer_enable - %d \n", dma_pointers[0]->xfer_enable);
+	  DPRINTK("total bytes - 0x%x \n", dma_pointers[0]->total_bytes);
+	  DPRINTK("total buffer - %d \n", dma_pointers[0]->total_buffers);
+	  DPRINTK("new buffers - %d \n", dma_pointers[0]->new_buffers);
+	  DPRINTK("current buffer - %d \n", dma_pointers[0]->current_buffer);
+	  DPRINTK("last buffer - %d \n", dma_pointers[0]->last_buffer);
+	  DPRINTK("used buffers - %d \n", dma_pointers[0]->used_buffers);
+	*/
+	/*
+	 *  Unmask irqs
+	 */
+	local_irq_restore(flags);
+
+	/*
+	 *  Success.
+	 */
+	return(0);
+}
+
+/*****************************************************************************
+ *
+ *  int ep93xx_dma_add_buffer(int handle, unsigned int * address,
+ *						 unsigned int size, unsigned int last)
+ *
+ *  Description: Add a buffer entry to the DMA buffer queue.
+ *
+ *  handle:	 handle for the channel to add this buffer to.
+ *  address:	Pointer to an integer which is the start address of the
+ *			  buffer which is to be added to the queue.
+ *  size:	   size of the buffer in bytes.
+ *  last:	   1 if this is the last buffer in this stream, 0 otherwise.
+ *
+ ****************************************************************************/
+int
+ep93xx_dma_add_buffer(int handle, unsigned int source, unsigned int dest,
+		      unsigned int size, unsigned int last,
+		      unsigned int buf_id)
+{
+	unsigned long flags;
+	ep93xx_dma_t * dma;
+	int  channel;
+#if 0
+	static int peak_total_buffers=0;
+#endif
+	/*
+	 *  Get the DMA hw channel # from the handle.
+	 */
+	channel = dma_get_channel_from_handle(handle);
+
+	/*
+	 *  See if this is a valid handle.
+	 */
+	if (channel < 0) {
+		printk(KERN_ERR
+			   "DMA Add Buffer: Invalid dma handle.\n");
+		return(-EINVAL);
+	}
+
+	/*
+	 *  Get a pointer to the dma instance.
+	 */
+	dma = &dma_chan[channel];
+
+#if 0	
+	if( dma->total_buffers > peak_total_buffers )
+	{
+	    peak_total_buffers=dma->total_buffers;
+	    printk("peak_total_buffers=%d\n", peak_total_buffers );
+	}
+#endif
+	/*
+	 *  Mask interrupts and hold on to the original state.
+	 */
+	local_irq_save(flags);
+
+	/*
+	 *  If the buffer queue is full, last_buffer is the same as current_buffer and
+	 *  we're not tranfering, or last_buffer is pointing to a used buffer, then exit.
+	 *  TODO: do I need to do any more checks?
+	 */
+	if (dma->total_buffers >= MAX_EP93XX_DMA_BUFFERS) 
+	{
+		DPRINTK("too many dma buffers: MAX_EP93XX_DMA_BUFFERS set to low ?\n");
+		/*
+		 *  Restore the state of the irqs
+		 */
+		local_irq_restore(flags);
+
+		/*
+		 *  Fail.
+		 */
+		return(-1);
+	}
+
+	/*
+	 *  Add this buffer to the queue
+	 */
+	dma->buffer_queue[dma->last_buffer].source = source;
+	dma->buffer_queue[dma->last_buffer].dest = dest;
+	dma->buffer_queue[dma->last_buffer].size = size;
+	dma->buffer_queue[dma->last_buffer].last = last;
+	dma->buffer_queue[dma->last_buffer].buf_id = buf_id;
+
+	/*
+	 *  Reset the used field of the buffer structure.
+	 */
+	dma->buffer_queue[dma->last_buffer].used = FALSE;
+
+	/*
+	 *  Increment the End Item Pointer.
+	 */
+	dma->last_buffer = (dma->last_buffer + 1) % MAX_EP93XX_DMA_BUFFERS;
+
+	/*
+	 *  Increment the new buffers counter and the total buffers counter
+	 */
+	dma->new_buffers++;
+	dma->total_buffers++;
+
+	/*
+	 *  restore the interrupt state.
+	 */
+	local_irq_restore(flags);
+
+	/*
+	 *  Check if the channel was starved into a stopped state.
+	 */
+	if (dma->pause && dma->xfer_enable) {
+		if (dma->new_buffers >= 1) {
+			DPRINTK("DMA - calling start from add after starve. \n");
+
+			/*
+			 *  The channel was starved into a stopped state, and we've got
+			 *  2 new buffers, so start tranferring again.
+			 */
+			ep93xx_dma_start(handle, 1, 0);
+		}
+	}
+
+	/*
+	 *  Success.
+	 */
+	return(0);
+}
+
+/*****************************************************************************
+ *
+ *  int ep93xx_dma_remove_buffer(int handle, unsigned int * address,
+ *								unsigned int * size)
+ *
+ *  Description: Remove a buffer entry from the DMA buffer queue. If
+ *			   buffer was removed successfully, return 0, otherwise
+ *			   return -1.
+ *
+ *  handle:	 handle for the channel to remove a buffer from.
+ *  address:	Pointer to an integer which is filled in with the start
+ *			  address of the removed buffer.
+ *  size:	   Pointer to an integer which is filled in with the size in
+ *			  bytes of the removed buffer.
+ *
+ ****************************************************************************/
+int
+ep93xx_dma_remove_buffer(int handle, unsigned int * buf_id)
+{
+	unsigned int test;
+	unsigned int loop;
+	int return_val = -1;
+	unsigned long flags;
+	ep93xx_dma_t *dma;
+	int  channel;
+
+	/*
+	 *  Get the DMA hw channel # from the handle.
+	 */
+	channel = dma_get_channel_from_handle(handle);
+
+	/*
+	 *  See if this is a valid handle.
+	 */
+	if (channel < 0) {
+		printk(KERN_ERR
+			   "DMA Remove Buffer: Invalid dma handle.\n");
+		return(-EINVAL);
+	}
+
+	dma = &dma_chan[channel];
+
+	/*
+	 *  Mask interrupts and hold on to the original state.
+	 */
+	local_irq_save(flags);
+
+	/*
+	 *  Make sure there are used buffers to be returned.
+	 */
+	if (dma->used_buffers) {
+		test = dma->last_buffer;
+
+		for (loop = 0; loop < MAX_EP93XX_DMA_BUFFERS; loop++) {
+			if (dma->buffer_queue[test].used && (dma->buffer_queue[test].buf_id != -1)) {
+				/*DPRINTK("buffer %d used \n", test); */
+
+				/*
+				 *  This is a used buffer, fill in the buf_id pointer
+				 *  with the buf_id for this buffer.
+				 */
+				*buf_id = dma->buffer_queue[test].buf_id;
+
+				/*
+				 *  Reset this buffer structure
+				 */
+				dma->buffer_queue[test].buf_id = -1;
+
+				/*
+				 *  Decrement the used buffer counter, and the total buffer counter.
+				 */
+				dma->used_buffers--;
+				dma->total_buffers--;
+
+				/*
+				 *  Successful removal of a buffer, so set the return
+				 *  value to 0, then exit this loop.
+				 */
+				return_val = 0;
+				break;
+			}
+
+			/*
+			 *  This buffer isn't used, let's see if the next one is.
+			 */
+			test = (test + 1) % MAX_EP93XX_DMA_BUFFERS;
+		}
+	}
+
+	/*
+	 *  Restore interrupts.
+	 */
+	local_irq_restore(flags);
+
+	/*
+	 *  Success.
+	 */
+	return(return_val);
+}
+
+/*****************************************************************************
+ *
+ *  int ep93xx_dma_pause(int handle, unsigned int channels,
+ *					   unsigned int * handles)
+ *
+ *  Description: Disable any ongoing transfer for the given channel, retaining
+ *			   the state of the current buffer transaction so that upon
+ *			   resume, the dma will continue where it left off.
+ *
+ *  handle:	 Handle for the channel to be paused.  If this is a pause for
+ *			  for multiple channels, handle is a valid handle for one of
+ *			  the channels to be paused.
+ *  channels:   number of channel to pause transfers on.
+ *  handles:	Pointer to an array of handles, one for each channel which
+ *			  to be paused.  If this pause is intended only for one
+ *			  channel, this field should be set to NULL.
+ *
+ ****************************************************************************/
+int
+ep93xx_dma_pause(int handle, unsigned int channels, unsigned int * handles)
+{
+	unsigned long flags;
+	ep93xx_dma_t * dma;
+	int channel;
+
+	DPRINTK("ep93xx_dma_pause \n");
+
+	/*
+	 *  Mask interrupts and hold on to the original state.
+	 */
+	local_irq_save(flags);
+
+	/*
+	 *  Get the DMA hw channel # from the handle.
+	 */
+	channel = dma_get_channel_from_handle(handle);
+
+	/*
+	 *  See if this is a valid handle.
+	 */
+	if (channel < 0) {
+		/*
+		 *  restore interrupts.
+		 */
+		local_irq_restore(flags);
+
+		printk(KERN_ERR
+			   "DMA Pause: Invalid dma handle.\n");
+
+		/*
+		 *  Fail.
+		 */
+		return(-EINVAL);
+	}
+
+	DPRINTK("DMA %d: pause \n", channel);
+
+	/*
+	 *  Set up a pointer to the dma instance data.
+	 */
+	dma = &dma_chan[channel];
+
+	/*
+	 *  Check if we're already paused.
+	 */
+	if (dma->pause) {
+		/*
+		 *  We're paused, but are we stopped?
+		 */
+		if (dma->xfer_enable)
+			/*
+			 *  Put the channel in the stopped state.
+			 */
+			dma->xfer_enable = FALSE;
+
+		DPRINTK("DMA Pause - already paused.");
+	} else {
+		/*
+		 *  Put the channel into the stopped state.
+		 */
+		dma->xfer_enable = FALSE;
+		dma->pause = TRUE;
+	}
+
+	/*
+	 *  restore interrupts.
+	 */
+	local_irq_restore(flags);
+
+	/*
+	 *  Already paused, so exit.
+	 */
+	return(0);
+}
+
+/*****************************************************************************
+ *
+ *  void ep93xx_dma_flush(int handle)
+ *
+ *  Description: Flushes all queued buffers and transfers in progress
+ *			   for the given channel.  Return the buffer entries
+ *			   to the calling function.
+ *
+ *  handle:	 handle for the channel for which the flush is intended.
+ *
+ ****************************************************************************/
+int
+ep93xx_dma_flush(int handle)
+{
+	unsigned int loop;
+	unsigned long flags;
+	ep93xx_dma_t * dma;
+	int  channel;
+	unsigned int M2P_reg_base,uiCONTROL;
+
+	/*
+	 *  Get the DMA hw channel # from the handle.
+	 */
+	channel = dma_get_channel_from_handle(handle);
+
+	/*
+	 *  See if this is a valid handle.
+	 */
+	if (channel < 0) {
+		printk(KERN_ERR "DMA Flush: Invalid dma handle.\n");
+		return(-EINVAL);
+	}
+
+	DPRINTK("DMA %d: flush \n", channel);
+
+	/*
+	 *  Set up a pointer to the dma instance data for this channel
+	 */
+	dma = &dma_chan[channel];
+
+	/*
+	 *  Mask interrupts and hold on to the original state.
+	 */
+	local_irq_save(flags);
+
+	/*
+	 *  Disable the dma channel
+	 */
+	if (channel < 10) {
+		/*
+		 *  M2P channel
+		 */
+		uiCONTROL = inl(dma->reg_base+M2P_OFFSET_CONTROL);
+		uiCONTROL &= ~CONTROL_M2P_ENABLE;
+		outl( uiCONTROL, dma->reg_base+M2P_OFFSET_CONTROL );
+	} else {
+		/*
+		 *  M2M channel
+		 */
+		uiCONTROL = inl(dma->reg_base+M2M_OFFSET_CONTROL);
+		uiCONTROL &= ~CONTROL_M2M_ENABLE;
+		outl( uiCONTROL, dma->reg_base+M2M_OFFSET_CONTROL );
+	}
+
+	for (loop = 0; loop < MAX_EP93XX_DMA_BUFFERS; loop++)
+	{
+		dma->buffer_queue[loop].buf_id = -1;
+		dma->buffer_queue[loop].last = 0;
+	}
+
+	/*
+	 *  Set the Current and Last item to zero.
+	 */
+	dma->current_buffer = 0;
+	dma->last_buffer = 0;
+
+	/*
+	 *  Reset the Buffer counters
+	 */
+	dma->used_buffers = 0;
+	dma->new_buffers = 0;
+	dma->total_buffers = 0;
+
+	/*
+	 *  reset the Total bytes counter.
+	 */
+	dma->total_bytes = 0;
+
+    /*
+     * Reset the paused buffer.
+     */
+     dma->pause_buf.last = 0;
+     dma->pause_buf.buf_id = -1;
+
+	M2P_reg_base = dma_chan[channel].reg_base;
+
+	/*
+	 *  restore interrupts.
+	 */
+	local_irq_restore(flags);
+
+	/*
+	 *  Success.
+	 */
+	return(0);
+}
+
+/*****************************************************************************
+ *
+ *  int ep93xx_dma_queue_full(int handle)
+ *
+ *  Description: Query to determine if the DMA queue of buffers for
+ *			  a given channel is full.
+ *			  0 = queue is full
+ *			  1 = queue is not full
+ *
+ *  handle:	 handle for the channel to query.
+ *
+ ****************************************************************************/
+int
+ep93xx_dma_queue_full(int handle)
+{
+	int list_full = 0;
+	unsigned long flags;
+	int  channel;
+
+	/*
+	 *  Get the DMA hw channel # from the handle.
+	 */
+	channel = dma_get_channel_from_handle(handle);
+
+	/*
+	 *  See if this is a valid handle.
+	 */
+	if (channel < 0) {
+		printk(KERN_ERR "DMA Queue Full: Invalid dma handle.\n");
+		return(-EINVAL);
+	}
+
+	DPRINTK("DMA %d: queue full \n", channel);
+
+	/*
+	 *  Mask interrupts and hold on to the original state.
+	 */
+	local_irq_save(flags);
+
+	/*
+	 *  If the last item is equal to the used item then
+	 *  the queue is full.
+	 */
+	if (dma_chan[channel].total_buffers < MAX_EP93XX_DMA_BUFFERS)
+		list_full =  FALSE;
+	else
+		list_full = TRUE;
+
+	/*
+	 *  restore interrupts.
+	 */
+	local_irq_restore(flags);
+
+	return(list_full);
+}
+
+/*****************************************************************************
+ *
+ *  int ep93xx_dma_get_position()
+ *
+ *  Description:  Takes two integer pointers and fills them with the start
+ *                and current address of the buffer currently transferring
+ *                on the specified DMA channel.
+ *
+ *  handle         handle for the channel to query.
+ *  *buf_id        buffer id for the current buffer transferring on the
+ *                 dma channel.
+ *  *total         total bytes transferred on the channel.  Only counts  
+ *                 whole buffers transferred.
+ *  *current_frac  number of bytes transferred so far in the current buffer.
+ ****************************************************************************/
+int
+ep93xx_dma_get_position(int handle, unsigned int * buf_id,
+                        unsigned int * total, unsigned int * current_frac )
+{
+	int  channel;
+	ep93xx_dma_t * dma;
+	unsigned int buf_id1, total1, current_frac1, buf_id2, total2;
+	unsigned int Status, NextBuffer, StateIsBufNext, M2P_reg_base=0;
+	unsigned int pause1, pause2;
+
+	/*
+	 *  Get the DMA hw channel # from the handle.  See if this is a 
+	 *  valid handle.
+	 */
+	channel = dma_get_channel_from_handle(handle);
+	if (channel < 0) {
+		printk(KERN_ERR "DMA Get Position: Invalid dma handle.\n");
+		return(-EINVAL);
+	}
+
+	dma = &dma_chan[channel];
+
+	/*
+	 * If DMA moves to a new buffer in the middle of us grabbing the 
+	 * buffer info, then do it over again.
+	 */
+	do{
+		buf_id1 = dma->buffer_queue[dma->current_buffer].buf_id;
+		total1  = dma->total_bytes;
+		pause1  = dma->pause;
+
+		if (channel < 10) {
+			// M2P
+			M2P_reg_base = dma->reg_base;
+
+			Status = inl(M2P_reg_base+M2P_OFFSET_STATUS);
+
+			NextBuffer = ((Status & STATUS_M2P_NEXTBUFFER) != 0);
+
+			StateIsBufNext = ((Status & STATUS_M2P_CURRENT_MASK) == 
+			                  STATUS_M2P_DMA_BUF_NEXT);
+			
+			if( NextBuffer ^ StateIsBufNext )
+				current_frac1 = inl(M2P_reg_base+M2P_OFFSET_CURRENT1) -
+				                inl(M2P_reg_base+M2P_OFFSET_BASE1);	
+			else
+				current_frac1 = inl(M2P_reg_base+M2P_OFFSET_CURRENT0) -
+				                inl(M2P_reg_base+M2P_OFFSET_BASE0);	
+			
+		} else { 
+			// M2M - TODO implement this for M2M
+			current_frac1 = 0;
+		}
+		
+		buf_id2 = dma->buffer_queue[dma->current_buffer].buf_id;
+		total2 = dma->total_bytes;
+		pause2  = dma->pause;
+
+	} while ( (buf_id1 != buf_id2) || (total1 != total2) || (pause1 != pause2) );
+
+	if (pause1)
+		current_frac1 = 0;
+
+	if (buf_id)
+		*buf_id = buf_id1;
+
+	if (total)
+		*total  = total1;
+
+	if (current_frac)
+		*current_frac = current_frac1;
+	
+//	DPRINTK("DMA buf_id %d, total %d, frac %d\n", buf_id1, total1, current_frac1);
+
+	/*
+	 *  Success.
+	 */
+	return(0);
+}
+
+/*****************************************************************************
+ *
+ *  int ep93xx_dma_get_total(int handle)
+ *
+ *  Description:	Returns the total number of bytes transferred on the
+ *			specified channel since the channel was requested.
+ *
+ *  handle:	 handle for the channel to query.
+ *
+ ****************************************************************************/
+int
+ep93xx_dma_get_total(int handle)
+{
+	int  channel;
+
+	/*
+	 *  Get the DMA hw channel # from the handle.
+	 */
+	channel = dma_get_channel_from_handle(handle);
+
+	/*
+	 *  See if this is a valid handle.
+	 */
+	if (channel < 0) {
+		printk(KERN_ERR "DMA Get Total: Invalid dma handle.\n");
+		return(-EINVAL);
+	}
+
+	DPRINTK("DMA %d: total: %d \n", channel, dma_chan[channel].total_bytes);
+
+	/*
+	 *  Return the total number of bytes transferred on this channel since
+	 *  it was requested.
+	 */
+	return(dma_chan[channel].total_bytes);
+}
+
+/*****************************************************************************
+ *
+ *  int ep93xx_dma_is_done(int handle)
+ *
+ *  Description:	Determines if the specified channel is done
+ *			transferring the requested data.
+ *
+ *  handle:	 handle for the channel to query.
+ *
+ ****************************************************************************/
+int
+ep93xx_dma_is_done(int handle)
+{
+	ep93xx_dma_t *dma;
+	int channel;
+
+	/*
+	 *  Get the DMA hw channel # from the handle.
+	 */
+	channel = dma_get_channel_from_handle(handle);
+
+	/*
+	 *  See if this is a valid handle.
+	 */
+	if (channel < 0) {
+		printk(KERN_ERR "ep93xx_dma_is_done: Invalid dma handle.\n");
+		return(-EINVAL);
+	}
+
+        /*
+         * Get a pointer to the DMA channel state structure.
+         */
+        dma = &dma_chan[channel];
+
+        /*
+         * See if there are any buffers remaining to be provided to the HW.
+         */
+        if (dma->new_buffers)
+            return 0;
+
+        /*
+         * See if this is a M2P or M2M channel.
+         */
+        if (channel < 10) {
+            /*
+             * If the bytes remaining register of the HW is not zero, then
+             * there is more work to be done.
+             */
+            if (inl(dma->reg_base + M2P_OFFSET_REMAIN) != 0)
+                return 0;
+        } else {
+            /*
+             * If either byte count register in the HW is not zero, then there
+             * is more work to be done.
+             */
+            if ((inl(dma->reg_base + M2M_OFFSET_BCR0) != 0) ||
+                (inl(dma->reg_base + M2M_OFFSET_BCR1) != 0))
+                return 0;
+        }
+
+        /*
+         * The DMA is complete.
+         */
+        return 1;
+}
+
+/*****************************************************************************
+ * ep93xx_dma_request
+ *
+ * Description: This function will allocate a DMA channel for a particular
+ * hardware peripheral.  Before initiating a transfer on the allocated
+ * channel, the channel must be set up and buffers have to queued up.
+ *
+ *  handle:	 pointer to an integer which is filled in with a unique
+ *			  handle for this instance of the dma interface.
+ *  device_id   string with the device name, primarily used by /proc.
+ *  device	  hardware device ID for which the requested dma channel will
+ *			  transfer data.
+ *
+ ****************************************************************************/
+int
+ep93xx_dma_request(int * handle, const char *device_id,
+				   ep93xx_dma_dev_t device)
+{
+	ep93xx_dma_t *dma = NULL;
+	int channel;
+	unsigned int error = 0;
+	unsigned int loop;
+	unsigned int M2P_reg_base;
+
+	/*
+	 *  Check if the device requesting a DMA channel is a valid device.
+	 */
+	if ((device >= UNDEF) || (device < 0))
+		return(-ENODEV);
+
+	/*
+	 *  We've got a valid hardware device requesting a DMA channel.
+	 *  Now check if the device should open an M2P or M2M channel
+	 */
+	if (device < 20)
+		channel = dma_open_m2p(device);
+	else
+		channel = dma_open_m2m(device);
+
+	/*
+	 *  Check if we successfully opened a DMA channel
+	 */
+	if (channel < 0) {
+		printk(KERN_ERR "%s: Could not open dma channel for this device.\n",
+			   device_id);
+		return(-EBUSY);
+	}
+
+	dma = &dma_chan[channel];
+
+	/*
+	 *  Request the appropriate IRQ for the specified channel
+	 */
+	if (channel < 10)
+		error = request_irq(dma->irq, dma_m2p_irq_handler,
+				    SA_INTERRUPT, device_id, (void *) dma);
+	else
+		error = request_irq(dma->irq, &dma_m2m_irq_handler,
+				    SA_INTERRUPT, device_id, (void *) dma);
+	/*
+	 *  Check for any errors during the irq request
+	 */
+	if (error) {
+		printk(KERN_ERR "%s: unable to request IRQ %d for DMA channel\n",
+			   device_id, dma->irq);
+		return(error);
+	}
+
+	/*
+	 *  Generate a valid handle and exit.
+	 *
+	 *  Increment the last valid handle.
+	 *  Check for wraparound (unlikely, but we like to be complete).
+	 */
+	dma->last_valid_handle++;
+
+	if ( (dma->last_valid_handle & DMA_HANDLE_SPECIFIER_MASK) !=
+	     (channel << 28) )
+		dma->last_valid_handle = (channel << 28) + 1;
+
+	/*
+	 *  Fill in the handle pointer with a valid handle for
+	 *  this dma channel instance.
+	 */
+	*handle = dma->last_valid_handle;
+
+	DPRINTK("Handle for channel %d: 0x%x\n", channel, *handle);
+
+	/*
+	 * Save the device ID and device name.
+	 */
+	dma->device = device;
+	dma->device_id = device_id;
+
+	/*
+	 *  Init all fields within the dma instance.
+	 */
+	for (loop = 0; loop < MAX_EP93XX_DMA_BUFFERS; loop++)
+		dma->buffer_queue[loop].buf_id = -1;
+
+	/*
+	 *  Initialize all buffer queue variables.
+	 */
+	dma->current_buffer = 0;
+	dma->last_buffer = 0;
+
+	dma->new_buffers = 0;
+	dma->used_buffers = 0;
+	dma->total_buffers = 0;
+
+	/*
+	 *  Initialize the total bytes variable
+	 */
+	dma->total_bytes = 0;
+
+	/*
+	 *  Initialize the transfer and pause state variables to 0.
+	 */
+	dma->xfer_enable = 0;
+
+	dma->pause = 0;
+
+	/*
+	 *  Initialize the pause buffer structure.
+	 */
+	dma->pause_buf.buf_id = -1;
+
+	/*
+	 *  Initialize the callback function and user data fields.
+	 */
+	dma->callback = NULL;
+
+	/*
+	 * User data used as a parameter for the Callback function.  The user
+	 * sets up the data and sends it with the callback function.
+	 */
+	dma->user_data = 0;
+
+	M2P_reg_base = dma_chan[channel].reg_base;
+
+	/*
+	 *  Debugging message.
+	 */
+	DPRINTK("Successfully requested dma channel %d\n", channel);
+	DPRINTK("STATUS - 0x%x \n",	 inl(M2P_reg_base+M2P_OFFSET_STATUS) );
+	DPRINTK("CONTROL - 0x%x \n",	inl(M2P_reg_base+M2P_OFFSET_CONTROL) );
+	DPRINTK("REMAIN - 0x%x \n",	 inl(M2P_reg_base+M2P_OFFSET_REMAIN) );
+	DPRINTK("PPALLOC - 0x%x \n",	inl(M2P_reg_base+M2P_OFFSET_PPALLOC) );
+	DPRINTK("BASE0 - 0x%x \n",	  inl(M2P_reg_base+M2P_OFFSET_BASE0) );
+	DPRINTK("MAXCNT0 - 0x%x \n",	inl(M2P_reg_base+M2P_OFFSET_MAXCNT0) );
+	DPRINTK("CURRENT0 - 0x%x \n",   inl(M2P_reg_base+M2P_OFFSET_CURRENT0) );
+	DPRINTK("BASE1 - 0x%x \n",	  inl(M2P_reg_base+M2P_OFFSET_BASE1) );
+	DPRINTK("MAXCNT1 - 0x%x \n",	inl(M2P_reg_base+M2P_OFFSET_MAXCNT1) );
+	DPRINTK("CURRENT1 - 0x%x \n",   inl(M2P_reg_base+M2P_OFFSET_CURRENT1) );
+
+	DPRINTK("Buffer	source	   size	   last	   used \n");
+	for (loop = 0; loop < 5; loop ++)
+		DPRINTK("%d		0x%x		 0x%x		%d		 %d \n",
+			loop, dma->buffer_queue[loop].source, dma->buffer_queue[loop].size,
+			dma->buffer_queue[loop].last, dma->buffer_queue[loop].used);
+	DPRINTK("pause	 0x%x		 0x%x		%d		 %d \n",
+		dma->pause_buf.source, dma->pause_buf.size,
+		dma->pause_buf.last, dma->pause_buf.used);
+
+	DPRINTK("Pause - %d \n", dma->pause);
+	DPRINTK("xfer_enable - %d \n", dma->xfer_enable);
+	DPRINTK("total bytes - 0x%x \n", dma->total_bytes);
+	DPRINTK("total buffer - %d \n", dma->total_buffers);
+	DPRINTK("new buffers - %d \n", dma->new_buffers);
+	DPRINTK("current buffer - %d \n", dma->current_buffer);
+	DPRINTK("last buffer - %d \n", dma->last_buffer);
+	DPRINTK("used buffers - %d \n", dma->used_buffers);
+
+	DPRINTK("CURRENT1 - 0x%x \n",   inl(M2P_reg_base+M2P_OFFSET_CURRENT1) );
+	DPRINTK("VIC0IRQSTATUS - 0x%x, VIC0INTENABLE - 0x%x \n",
+		*(unsigned int *)(VIC0IRQSTATUS),
+		*(unsigned int *)(VIC0INTENABLE));
+
+	/*
+	 *  Success.
+	 */
+	return(0);
+}
+
+/*****************************************************************************
+ *
+ * ep93xx_dma_free
+ *
+ * Description: This function will free the dma channel for future requests.
+ *
+ *  handle:	 handle for the channel to be freed.
+ *
+ ****************************************************************************/
+int
+ep93xx_dma_free(int handle)
+{
+	ep93xx_dma_t *dma;
+	unsigned int M2M_reg_base, M2P_reg_base, uiCONTROL;
+	int channel;
+
+	/*
+	 *  Get the DMA hw channel # from the handle.
+	 */
+	channel = dma_get_channel_from_handle(handle);
+
+	/*
+	 *  See if this is a valid handle.
+	 */
+	if (channel < 0) {
+		printk(KERN_ERR "DMA Free: Invalid dma handle.\n");
+		return(-EINVAL);
+	}
+
+	/*
+	 *  Get a pointer to the dma instance.
+	 */
+	dma = &dma_chan[channel];
+
+	/*
+	 *  Disable the dma channel
+	 */
+	if (channel < 10) {
+		/*
+		 *  M2P channel
+		 */
+		M2P_reg_base = dma->reg_base;
+
+		uiCONTROL = inl(M2P_reg_base+M2P_OFFSET_CONTROL);
+		uiCONTROL &= ~CONTROL_M2P_ENABLE;
+		outl( uiCONTROL, M2P_reg_base+M2P_OFFSET_CONTROL );
+	} else {
+		/*
+		 *  M2M channel
+		 */
+		M2M_reg_base = dma->reg_base;
+
+		uiCONTROL = inl(M2M_reg_base+M2M_OFFSET_CONTROL);
+		uiCONTROL &= ~CONTROL_M2M_ENABLE;
+		outl( uiCONTROL, M2M_reg_base+M2M_OFFSET_CONTROL );
+	}
+
+	/*
+	 *  Free the interrupt servicing this dma channel
+	 */
+	free_irq(dma->irq, (void *) dma);
+
+	/*
+	 *  Decrement the reference count for this instance of the dma interface
+	 */
+	dma->ref_count--;
+
+	/*
+	 *  Set the transfer and pause state variables to 0
+	 *  (unititialized state).
+	 */
+	dma->xfer_enable = 0;
+	dma->pause = 0;
+
+	/*
+	 *  Debugging message.
+	 */
+	DPRINTK("Successfully freed dma channel %d\n", channel);
+
+	/*
+	 *  Success.
+	 */
+	return(0);
+}
+
+/*****************************************************************************
+ *
+ * ep93xx_dma_init(void)
+ *
+ * Description: This function is called during system initialization to
+ * setup the interrupt number and register set base address for each DMA
+ * channel.
+ *
+ ****************************************************************************/
+static int __init
+ep93xx_dma_init(void)
+{
+	int channel;
+
+	/*
+	 * Init some values in each dma instance.
+	 */
+	for (channel = 0; channel < MAX_EP93XX_DMA_CHANNELS; channel++) {
+		/*
+		 *  IRQ for the specified dma channel.
+		 */
+		dma_chan[channel].irq = IRQ_EP93XX_DMAM2P0 + channel;
+
+		/*
+		 *  Initial value of the dma channel handle.
+		 */
+		dma_chan[channel].last_valid_handle = channel << 28;
+
+		/*
+		 *  Give the instance a pointer to the dma channel register
+		 *  base.
+		 */
+		if (channel < 10)
+			dma_chan[channel].reg_base = DMAM2PChannelBase[channel];
+		else
+			dma_chan[channel].reg_base = DMAM2MChannelBase[channel - 10];
+
+		/*
+		 *  Initialize the reference count for this channel.
+		 */
+		dma_chan[channel].ref_count = 0;
+	}
+
+	DPRINTK("DMA Interface intitialization complete\n");
+
+	/*
+	 * Success
+	 */
+	return 0;
+}
+
+arch_initcall(ep93xx_dma_init);
+
+EXPORT_SYMBOL(ep93xx_dma_free);
+EXPORT_SYMBOL(ep93xx_dma_request);
+EXPORT_SYMBOL(ep93xx_dma_flush);
+EXPORT_SYMBOL(ep93xx_dma_pause);
+EXPORT_SYMBOL(ep93xx_dma_remove_buffer);
+EXPORT_SYMBOL(ep93xx_dma_add_buffer);
+EXPORT_SYMBOL(ep93xx_dma_start);
+EXPORT_SYMBOL(ep93xx_dma_config);
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/dma_ep93xx.h linux/arch/arm/mach-ep93xx/dma_ep93xx.h
--- linux-2.6.20.4/arch/arm/mach-ep93xx/dma_ep93xx.h	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/dma_ep93xx.h	2007-03-29 15:22:22.000000000 +0800
@@ -0,0 +1,199 @@
+/*****************************************************************************
+ *
+ * arch/arm/mach-ep93xx/dma_ep93xx.h
+ *
+ * DESCRIPTION:    93XX DMA controller API private defintions.
+ *
+ * Copyright Cirrus Logic Corporation, 2003.  All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ ****************************************************************************/
+#ifndef _EP93XX_DMA_H_
+#define _EP93XX_DMA_H_
+
+// as it turns out the ide dma is the biggest dma buffer hog so far
+// in case the HDD is "thinking" (seek/buffer flush)
+// the continueing r/w DMAs to the HDD will be queued up to up to PRD_ENTRIES entries...
+#include <linux/ide.h>
+#define MAX_EP93XX_DMA_BUFFERS      PRD_ENTRIES
+
+#ifndef TRUE
+#define TRUE                        1
+#endif
+
+#ifndef FALSE
+#define FALSE                       0
+#endif
+
+#ifndef NULL
+#define NULL                        0
+#endif
+
+/*****************************************************************************
+ *
+ * DMA buffer structure type.
+ *
+ ****************************************************************************/
+typedef struct ep93xx_dma_buffer_s
+{
+    unsigned int    source;     /* buffer physical source address.          */
+    unsigned int    dest;       /* buffer physical destination address,     */
+                                /* only used with the 2 M2M channels.       */
+    unsigned int    size;       /* buffer size in bytes                     */
+    unsigned int    last;       /* 1 if this is the last buffer             */
+                                /* in this transaction.  If 1,              */
+                                /* disable the NFBint so we aren't          */
+                                /* interrupted for another buffer           */
+                                /* when we know there won't be another.     */
+    unsigned int    used;       /* This field is set to 1 by the DMA        */
+                                /* interface after the buffer is transferred*/
+    int    buf_id;              /* unique identifyer specified by the       */
+                                /* the driver which requested the dma       */
+} ep93xx_dma_buffer_t;
+
+typedef ep93xx_dma_buffer_t * ep93xx_dma_buffer_p;
+
+/*****************************************************************************
+ *
+ * Instance definition for the DMA interface.
+ *
+ ****************************************************************************/
+typedef struct ep9312_dma_s
+{
+    /*
+     *  This 1 when the instance is in use, and 0 when it's not.
+     */
+    unsigned int ref_count;
+
+    /*
+     * This is the last valid handle for this instance.  When giving out a
+     * new handle this will be incremented and given out.
+     */
+    int last_valid_handle;
+
+    /*
+     * device specifies one of the 20 DMA hardware ports this 
+     * DMA channel will service.
+     */
+    ep93xx_dma_dev_t device;
+
+    /*
+     * DMABufferQueue is the queue of buffer structure pointers which the
+     * dma channel will use to setup transfers.
+     */
+    ep93xx_dma_buffer_t buffer_queue[MAX_EP93XX_DMA_BUFFERS];
+
+    /*
+     * currnt_buffer : This is the buffer currently being transfered on 
+     *                 this channel.
+     * last_buffer : This is the last buffer for this transfer.
+     * Note: current_buffer + 1 is already programmed into the dma
+     *       channel as the next buffer to transfer. Don't write
+     *       over either entry.
+     */
+    int current_buffer;
+    int last_buffer;
+
+    /*
+     * The following 3 fields are buffer counters.
+     *
+     * iNewBuffers: Buffers in the queue which have not been transfered.
+     * iUsedBuffers: Buffers in the queue which have have been tranferred,
+     *               and are waiting to be returned.
+     * iTotalBuffers: Total number of buffers in the queue.
+     */  
+    int new_buffers;
+    int used_buffers;
+    int total_buffers;
+
+    /*
+     * uiTotalBytes has the total bytes transfered on the channel since the
+     * last flush.  This value does not include the bytes tranfered in the
+     * current buffer.  A byte count is only added after a complete buffer
+     * is tranfered. 
+     */
+    unsigned int total_bytes;
+
+    /*
+     *  Interrupt number for this channel
+     */
+    unsigned int irq;
+
+    /*
+     * Indicates whether or not the channel is currently enabled to transfer
+     * data.
+     */
+    unsigned int xfer_enable;
+    
+    /*
+     * pause indicates if the dma channel was paused by calling the pause
+     * ioctl.
+     */
+    unsigned int pause;
+    
+    /*
+     *  buffer structure used during a pause to capture the current
+     *  address and remaining bytes for the buffer actively being transferred
+     *  on the channel. This buffer will be used to reprogram the dma 
+     *  channel upon a resume.
+     */
+    ep93xx_dma_buffer_t pause_buf;
+    
+    /*
+     * DMACallback is a function pointer which the calling application can 
+     * use install a function to.  this fuction can be used to notify the 
+     * calling application of an interrupt.
+     */
+    dma_callback callback;
+
+    /*
+     * User data used as a parameter for the Callback function.  The user
+     * sets up the data and sends it with the callback function.
+     */
+    unsigned int user_data;
+    
+    /*
+     * A string representation of the device attached to the channel.
+     */
+    const char * device_id;
+    
+    /*
+     * The register base address for this dma channel.
+     */
+    unsigned int reg_base;
+    
+} ep93xx_dma_t;
+
+/*****************************************************************************
+ *
+ * DMA macros
+ *
+ ****************************************************************************/
+#define DMA_HANDLE_SPECIFIER_MASK   0xF0000000
+#define DMA_CH0_HANDLE_SPECIFIER    0x00000000
+#define DMA_CH1_HANDLE_SPECIFIER    0x10000000
+#define DMA_CH2_HANDLE_SPECIFIER    0x20000000
+#define DMA_CH3_HANDLE_SPECIFIER    0x30000000
+#define DMA_CH4_HANDLE_SPECIFIER    0x40000000
+#define DMA_CH5_HANDLE_SPECIFIER    0x50000000
+#define DMA_CH6_HANDLE_SPECIFIER    0x60000000
+#define DMA_CH7_HANDLE_SPECIFIER    0x70000000
+#define DMA_CH8_HANDLE_SPECIFIER    0x80000000
+#define DMA_CH9_HANDLE_SPECIFIER    0x90000000
+#define DMA_CH10_HANDLE_SPECIFIER   0xA0000000
+#define DMA_CH11_HANDLE_SPECIFIER   0xB0000000
+
+#endif // _DMADRV_H_
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/edb9301.c linux/arch/arm/mach-ep93xx/edb9301.c
--- linux-2.6.20.4/arch/arm/mach-ep93xx/edb9301.c	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/edb9301.c	2007-04-24 13:14:54.000000000 +0800
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-ep93xx/edb9301.c
+ * Cirrus Logic EDB9302 support.
+ *
+ * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#if defined(CONFIG_MTD_PHYSMAP)
+static struct physmap_flash_data edb9301_flash_data = {
+	.width		= 2,
+};
+
+static struct resource edb9301_flash_resource = {
+	.start		= 0x60000000,
+	.end		= 0x60ffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device edb9301_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &edb9301_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &edb9301_flash_resource,
+};
+#endif
+
+static void __init edb9301_init_machine(void)
+{
+	ep93xx_init_devices();
+#if defined(CONFIG_MTD_PHYSMAP)
+	platform_device_register(&edb9301_flash);
+#endif
+}
+
+MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
+	/* Maintainer: George Kashperko <george@chas.com.ua> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb9301_init_machine,
+MACHINE_END
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/edb9302a.c linux/arch/arm/mach-ep93xx/edb9302a.c
--- linux-2.6.20.4/arch/arm/mach-ep93xx/edb9302a.c	2007-04-24 10:42:58.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/edb9302a.c	2007-04-23 11:30:00.000000000 +0800
@@ -9,7 +9,7 @@
  * the Free Software Foundation; either version 2 of the License, or (at
  * your option) any later version.
  */
-
+#include <linux/autoconf.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mm.h>
@@ -23,6 +23,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#if defined(CONFIG_MTD_PHYSMAP)
 static struct physmap_flash_data edb9302a_flash_data = {
 	.width		= 2,
 };
@@ -42,41 +43,14 @@
 	.num_resources	= 1,
 	.resource	= &edb9302a_flash_resource,
 };
-
-static struct ep93xx_eth_data edb9302a_eth_data = {
-	.phy_id			= 1,
-};
-
-static struct resource edb9302a_eth_resource[] = {
-	{
-		.start	= EP93XX_ETHERNET_PHYS_BASE,
-		.end	= EP93XX_ETHERNET_PHYS_BASE + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_EP93XX_ETHERNET,
-		.end	= IRQ_EP93XX_ETHERNET,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device edb9302a_eth_device = {
-	.name		= "ep93xx-eth",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &edb9302a_eth_data,
-	},
-	.num_resources	= 2,
-	.resource	= edb9302a_eth_resource,
-};
+#endif
 
 static void __init edb9302a_init_machine(void)
 {
 	ep93xx_init_devices();
+#if defined(CONFIG_MTD_PHYSMAP)
 	platform_device_register(&edb9302a_flash);
-
-	memcpy(edb9302a_eth_data.dev_addr,
-		(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
-	platform_device_register(&edb9302a_eth_device);
+#endif
 }
 
 MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/edb9302.c linux/arch/arm/mach-ep93xx/edb9302.c
--- linux-2.6.20.4/arch/arm/mach-ep93xx/edb9302.c	2007-04-24 10:42:58.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/edb9302.c	2007-04-23 11:28:34.000000000 +0800
@@ -9,7 +9,7 @@
  * the Free Software Foundation; either version 2 of the License, or (at
  * your option) any later version.
  */
-
+#include <linux/autoconf.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mm.h>
@@ -23,6 +23,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#if defined(CONFIG_MTD_PHYSMAP)
 static struct physmap_flash_data edb9302_flash_data = {
 	.width		= 2,
 };
@@ -42,11 +43,14 @@
 	.num_resources	= 1,
 	.resource	= &edb9302_flash_resource,
 };
+#endif
 
 static void __init edb9302_init_machine(void)
 {
 	ep93xx_init_devices();
+#if defined(CONFIG_MTD_PHYSMAP)
 	platform_device_register(&edb9302_flash);
+#endif
 }
 
 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/edb9307a.c linux/arch/arm/mach-ep93xx/edb9307a.c
--- linux-2.6.20.4/arch/arm/mach-ep93xx/edb9307a.c	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/edb9307a.c	2007-04-23 15:05:36.000000000 +0800
@@ -0,0 +1,67 @@
+/*
+ * arch/arm/mach-ep93xx/edb9307a.c
+ * Cirrus Logic EDB9315A support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#if defined(CONFIG_MTD_PHYSMAP)
+static struct physmap_flash_data edb9307a_flash_data = {
+	.width		= 2,
+};
+
+static struct resource edb9307a_flash_resource = {
+	.start		= 0x60000000,
+	.end		= 0x61ffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device edb9307a_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &edb9307a_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &edb9307a_flash_resource,
+};
+#endif
+
+
+static void __init edb9307a_init_machine(void)
+{
+	ep93xx_init_devices();
+#if defined(CONFIG_MTD_PHYSMAP)
+	platform_device_register(&edb9307a_flash);
+#endif
+
+}
+
+MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_PARAMS_PHYS,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb9307a_init_machine,
+MACHINE_END
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/edb9307.c linux/arch/arm/mach-ep93xx/edb9307.c
--- linux-2.6.20.4/arch/arm/mach-ep93xx/edb9307.c	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/edb9307.c	2007-04-23 10:07:51.000000000 +0800
@@ -0,0 +1,67 @@
+/*
+ * arch/arm/mach-ep93xx/edb9312.c
+ * Cirrus Logic EDB9312 support.
+ *
+ * Copyright (C) 2006 Infosys Technologies Limited
+ * 	Toufeeq Hussain	<toufeeq_hussain@infosys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#if defined(CONFIG_MTD_PHYSMAP)
+static struct physmap_flash_data edb9307_flash_data = {
+	.width		= 4,
+};
+
+static struct resource edb9307_flash_resource = {
+	.start		= 0x60000000,
+	.end		= 0x61ffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device edb9307_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &edb9307_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &edb9307_flash_resource,
+};
+#endif
+
+static void __init edb9307_init_machine(void)
+{
+	ep93xx_init_devices();
+#if defined(CONFIG_MTD_PHYSMAP)
+	platform_device_register(&edb9307_flash);
+#endif
+
+}
+
+MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
+	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb9307_init_machine,
+MACHINE_END
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/edb9312.c linux/arch/arm/mach-ep93xx/edb9312.c
--- linux-2.6.20.4/arch/arm/mach-ep93xx/edb9312.c	2007-04-24 10:42:58.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/edb9312.c	2007-03-29 14:03:29.000000000 +0800
@@ -24,6 +24,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#if defined(CONFIG_MTD_PHYSMAP)
 static struct physmap_flash_data edb9312_flash_data = {
 	.width		= 4,
 };
@@ -43,11 +44,15 @@
 	.num_resources	= 1,
 	.resource	= &edb9312_flash_resource,
 };
+#endif
 
 static void __init edb9312_init_machine(void)
 {
 	ep93xx_init_devices();
+#if defined(CONFIG_MTD_PHYSMAP)
 	platform_device_register(&edb9312_flash);
+#endif
+
 }
 
 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/edb9315a.c linux/arch/arm/mach-ep93xx/edb9315a.c
--- linux-2.6.20.4/arch/arm/mach-ep93xx/edb9315a.c	2007-04-24 10:42:58.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/edb9315a.c	2007-04-23 11:27:24.000000000 +0800
@@ -23,13 +23,14 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#if defined(CONFIG_MTD_PHYSMAP)
 static struct physmap_flash_data edb9315a_flash_data = {
 	.width		= 2,
 };
 
 static struct resource edb9315a_flash_resource = {
 	.start		= 0x60000000,
-	.end		= 0x60ffffff,
+	.end		= 0x61ffffff,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -42,48 +43,21 @@
 	.num_resources	= 1,
 	.resource	= &edb9315a_flash_resource,
 };
-
-static struct ep93xx_eth_data edb9315a_eth_data = {
-	.phy_id			= 1,
-};
-
-static struct resource edb9315a_eth_resource[] = {
-	{
-		.start	= EP93XX_ETHERNET_PHYS_BASE,
-		.end	= EP93XX_ETHERNET_PHYS_BASE + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_EP93XX_ETHERNET,
-		.end	= IRQ_EP93XX_ETHERNET,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device edb9315a_eth_device = {
-	.name		= "ep93xx-eth",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &edb9315a_eth_data,
-	},
-	.num_resources	= 2,
-	.resource	= edb9315a_eth_resource,
-};
+#endif
 
 static void __init edb9315a_init_machine(void)
 {
 	ep93xx_init_devices();
+#if defined(CONFIG_MTD_PHYSMAP)
 	platform_device_register(&edb9315a_flash);
-
-	memcpy(edb9315a_eth_data.dev_addr,
-		(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
-	platform_device_register(&edb9315a_eth_device);
+#endif
 }
 
 MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0xc0000100,
+	.boot_params	= EP93XX_PARAMS_PHYS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/edb9315.c linux/arch/arm/mach-ep93xx/edb9315.c
--- linux-2.6.20.4/arch/arm/mach-ep93xx/edb9315.c	2007-04-24 10:42:58.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/edb9315.c	2007-04-23 11:25:24.000000000 +0800
@@ -9,7 +9,7 @@
  * the Free Software Foundation; either version 2 of the License, or (at
  * your option) any later version.
  */
-
+#include <linux/autoconf.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mm.h>
@@ -23,6 +23,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#if defined(CONFIG_MTD_PHYSMAP)
 static struct physmap_flash_data edb9315_flash_data = {
 	.width		= 4,
 };
@@ -42,11 +43,14 @@
 	.num_resources	= 1,
 	.resource	= &edb9315_flash_resource,
 };
+#endif
 
 static void __init edb9315_init_machine(void)
 {
 	ep93xx_init_devices();
+#if defined(CONFIG_MTD_PHYSMAP)
 	platform_device_register(&edb9315_flash);
+#endif
 }
 
 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/irq.c linux/arch/arm/mach-ep93xx/irq.c
--- linux-2.6.20.4/arch/arm/mach-ep93xx/irq.c	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/irq.c	2007-03-29 17:47:42.000000000 +0800
@@ -0,0 +1,102 @@
+/*
+ *  linux/arch/arm/mach-ep93xx/irq.c
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * (c) Copyright 2001 LynuxWorks, Inc., San Jose, CA.  All rights reserved.
+ *
+ *  Copyright (C) 2002-2003 Cirrus Logic, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+
+/********************************************************************
+ *	Interrupt functions are defined as machine specific here.
+ *
+ *	Note:
+ *		1.  Only normal interrupts are defined here.
+ *		FIQs are a separate class of interrupts and would
+ *		be slowed down if handled like normal interrupts.
+ *
+ *		2.  TBD Invalid interrupt numbers are not checked.
+ *		Some interrupt inputs are tied to GND, which means 
+ *		they will immediately activate when unmasked.
+ *		Which may be useful for some devices.
+ *
+ *		3.  TBD Edge triggered interrupts are not specially
+ *		handled.  The architecture should provide a way to
+ *		set up the edge trigger features and then a way to
+ *		control the acknowledge to the interrupt.
+ *
+ ************************************************************************/
+
+static void int1_mask(unsigned int irq)
+{
+	outl( (1 << irq), VIC0INTENCLEAR );
+}
+
+static void int1_unmask(unsigned int irq)
+{
+	outl( (1 << irq), VIC0INTENABLE );
+}
+
+static struct irq_chip int1_chip = {
+	.ack	= int1_mask,
+	.mask	= int1_mask,
+	.unmask	= int1_unmask,
+};
+ 
+static void int2_mask(unsigned int irq)
+{
+	outl( (1 << (irq - 32)), VIC1INTENCLEAR );
+}
+
+static void int2_unmask(unsigned int irq)
+{
+	outl( (1 << (irq - 32)), VIC1INTENABLE );
+}
+
+static struct irq_chip int2_chip = {
+	.ack	= int2_mask,
+	.mask	= int2_mask,
+	.unmask	= int2_unmask,
+};
+ 
+void __init ep93xx_init_irq(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < NR_IRQS; i++) {
+		if ((i < 32) && (INT1_IRQS & (1 << i))) {
+			set_irq_handler(i, handle_level_irq);
+			set_irq_chip(i, &int1_chip);
+			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+		}
+		if ((i >= 32) && (INT2_IRQS & (1 << (i - 32)))) {
+			set_irq_handler(i, handle_level_irq);
+			set_irq_chip(i, &int2_chip);
+			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+}
+
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/Kconfig linux/arch/arm/mach-ep93xx/Kconfig
--- linux-2.6.20.4/arch/arm/mach-ep93xx/Kconfig	2007-04-24 10:42:58.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/Kconfig	2007-04-23 11:42:26.000000000 +0800
@@ -15,6 +15,12 @@
 	  Say 'Y' here if you want your kernel to support the ADS
 	  Sphere board.
 
+config MACH_EDB9301
+	bool "Support Cirrus Logic EDB9301"
+	help
+	  Say 'Y' here if you want your kernel to support the Cirrus
+	  Logic EDB9301 Evaluation Board.
+
 config MACH_EDB9302
 	bool "Support Cirrus Logic EDB9302"
 	help
@@ -27,6 +33,18 @@
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9302A Evaluation Board.
 
+config MACH_EDB9307
+	bool "Support Cirrus Logic EDB9307"
+	help
+	  Say 'Y' here if you want your kernel to support the Cirrus
+	  Logic EDB9307 Evaluation Board.
+
+config MACH_EDB9307A
+	bool "Support Cirrus Logic EDB9307A"
+	help
+	  Say 'Y' here if you want your kernel to support the Cirrus
+	  Logic EDB9302A Evaluation Board.
+
 config MACH_EDB9312
 	bool "Support Cirrus Logic EDB9312"
 	help
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/Makefile linux/arch/arm/mach-ep93xx/Makefile
--- linux-2.6.20.4/arch/arm/mach-ep93xx/Makefile	2007-04-24 10:42:58.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/Makefile	2007-04-23 11:43:16.000000000 +0800
@@ -1,14 +1,17 @@
 #
 # Makefile for the linux kernel.
 #
-obj-y			:= core.o clock.o
+obj-y			:= core.o clock.o ssp.o  pcmcia_io.o dma_ep93xx.o
 obj-m			:=
 obj-n			:=
 obj-			:=
 
 obj-$(CONFIG_MACH_ADSSPHERE)	+= adssphere.o
+obj-$(CONFIG_MACH_EDB9301)      += edb9301.o
 obj-$(CONFIG_MACH_EDB9302)	+= edb9302.o
 obj-$(CONFIG_MACH_EDB9302A)	+= edb9302a.o
+obj-$(CONFIG_MACH_EDB9307)      += edb9307.o
+obj-$(CONFIG_MACH_EDB9307A)     += edb9307a.o
 obj-$(CONFIG_MACH_EDB9312)	+= edb9312.o
 obj-$(CONFIG_MACH_EDB9315)	+= edb9315.o
 obj-$(CONFIG_MACH_EDB9315A)	+= edb9315a.o
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/Makefile.boot linux/arch/arm/mach-ep93xx/Makefile.boot
--- linux-2.6.20.4/arch/arm/mach-ep93xx/Makefile.boot	2007-04-24 10:42:58.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/Makefile.boot	2007-03-30 16:13:58.000000000 +0800
@@ -1,2 +1,21 @@
-   zreladdr-y	:= 0x00008000
-params_phys-y	:= 0x00000100
+   zreladdr-$(CONFIG_MACH_GESBC9312)	:= 0x00008000
+params_phys-$(CONFIG_MACH_GESBC9312)	:= 0x00000100
+   zreladdr-$(CONFIG_MACH_TS72XX)	:= 0x00008000
+params_phys-$(CONFIG_MACH_TS72XX)	:= 0x00000100
+   zreladdr-$(CONFIG_MACH_EDB9301)	:= 0x00008000
+params_phys-$(CONFIG_MACH_EDB9301)	:= 0x00000100
+   zreladdr-$(CONFIG_MACH_EDB9302)	:= 0x00008000
+params_phys-$(CONFIG_MACH_EDB9302)	:= 0x00000100
+   zreladdr-$(CONFIG_MACH_EDB9307)	:= 0x00008000
+params_phys-$(CONFIG_MACH_EDB9307)	:= 0x00000100
+   zreladdr-$(CONFIG_MACH_EDB9312)	:= 0x00008000
+params_phys-$(CONFIG_MACH_EDB9312)	:= 0x00000100
+   zreladdr-$(CONFIG_MACH_EDB9315)	:= 0x00008000
+params_phys-$(CONFIG_MACH_EDB9315)	:= 0x00000100
+   zreladdr-$(CONFIG_MACH_EDB9302A)	:= 0xc0008000
+params_phys-$(CONFIG_MACH_EDB9302A)	:= 0xc0000100
+   zreladdr-$(CONFIG_MACH_EDB9307A)	:= 0xc0008000
+params_phys-$(CONFIG_MACH_EDB9307A)	:= 0xc0000100
+   zreladdr-$(CONFIG_MACH_EDB9315A)	:= 0xc0008000
+params_phys-$(CONFIG_MACH_EDB9315A)	:= 0xc0000100
+
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/pcmcia_io.c linux/arch/arm/mach-ep93xx/pcmcia_io.c
--- linux-2.6.20.4/arch/arm/mach-ep93xx/pcmcia_io.c	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/pcmcia_io.c	2007-04-09 17:13:32.000000000 +0800
@@ -0,0 +1,99 @@
+/*
+ *  linux/arch/arm/mach-ep93xx/pcmcia_io.c
+ *
+ * (c) Copyright 2004 Cirrus Logic, Inc., Austin, Tx 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/autoconf.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/utsname.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/memory.h>
+#include <asm/arch/platform.h>
+
+#include <asm/mach/arch.h>
+
+#ifndef __EP93XX_PCMCIA_IDE_HACK__
+#define __EP93XX_PCMCIA_IDE_HACK__
+
+/*
+ * These routines are used to hack the default io i/o routines in
+ * drivers/io/io-iops.h so they work with PCMCIA IDE.  Sad, but
+ * necessary.
+ */
+#define SET_PCMCIA_WIDTH_16_BIT \
+	unsigned long ulSMC_PCIO = inl( SMC_PCIO );	 \
+	if ( (ulSMC_PCIO & PCCONFIG_MW_16BIT)	== 0 ) {   \
+		outl( ulSMC_PCIO | PCCONFIG_MW_16BIT, SMC_PCIO ); \
+		ulSMC_PCIO = inl( SMC_PCIO ); \
+	}
+	
+#define SET_PCMCIA_WIDTH_8_BIT \
+	unsigned long ulSMC_PCIO = inl( SMC_PCIO );	\
+	if ( ulSMC_PCIO & PCCONFIG_MW_16BIT ) {		\
+		outl( ulSMC_PCIO & ~PCCONFIG_MW_16BIT, SMC_PCIO ); \
+		ulSMC_PCIO = inl( SMC_PCIO ); \
+	}
+
+
+inline u8 ep93xx_pcmcia_io_inb (unsigned long port)
+{
+	SET_PCMCIA_WIDTH_8_BIT
+	return (u8) inb(port);
+}
+
+inline u16 ep93xx_pcmcia_io_inw (unsigned long port)
+{
+	SET_PCMCIA_WIDTH_16_BIT
+	return (u16) inw(port);
+}
+
+inline void ep93xx_pcmcia_io_insw (unsigned long port, void *addr, u32 count)
+{
+	SET_PCMCIA_WIDTH_16_BIT
+	return insw(port, addr, count);
+}
+
+inline void ep93xx_pcmcia_io_outb (u8 addr, unsigned long port)
+{
+	SET_PCMCIA_WIDTH_8_BIT
+	outb(addr, port);
+	ulSMC_PCIO = inl( SMC_PCIO );
+}
+
+inline void ep93xx_pcmcia_io_outw (u16 addr, unsigned long port)
+{
+	SET_PCMCIA_WIDTH_16_BIT
+	outw(addr, port);
+	ulSMC_PCIO = inl( SMC_PCIO );
+}
+
+inline void ep93xx_pcmcia_io_outsw (unsigned long port, void *addr, u32 count)
+{
+	SET_PCMCIA_WIDTH_16_BIT
+	outsw(port, addr, count);
+	ulSMC_PCIO = inl( SMC_PCIO );
+}
+#endif /* __EP93XX_PCMCIA_IDE_HACK__ */
+
diff -burN linux-2.6.20.4/arch/arm/mach-ep93xx/ssp.c linux/arch/arm/mach-ep93xx/ssp.c
--- linux-2.6.20.4/arch/arm/mach-ep93xx/ssp.c	1970-01-01 08:00:00.000000000 +0800
+++ linux/arch/arm/mach-ep93xx/ssp.c	2007-04-19 14:49:40.000000000 +0800
@@ -0,0 +1,975 @@
+/*
+ *  FILE:			ssp.c
+ *
+ *  DESCRIPTION:	SSP Interface Driver Module implementation
+ *
+ *  Copyright Cirrus Logic Corporation, 2001-2003.  All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ *  This driver provides a way to read and write devices on the SSP
+ *  interface.
+ *
+ *  For Tx devices, EGPIO7 is used as an address pin:
+ *  I2S Codec CS4228        = EGPIO7 == 1
+ *  Serial Flash AT25F1024  = EGPIO7 == 0
+ */
+#include <linux/delay.h>
+//#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <linux/autoconf.h>
+
+#include <linux/spinlock.h>
+#include <asm/semaphore.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/ssp.h>
+
+#undef DEBUG
+//#define DEBUG 1
+#ifdef DEBUG
+//#define DPRINTK( x... )  printk( ##x )
+#define DPRINTK( fmt, arg... )  printk( fmt, ##arg )
+#else
+//#define DPRINTK( x... )
+#define DPRINTK( fmt, arg... )
+#endif
+
+
+#define EP93XX_KEY_TIMER_PERIOD_MSEC 20
+
+static int SSP_Open(SSPDeviceType Device, SSPDataCallback Callback);
+static int SSP_Close(int Handle);
+static int SSP_Read(int Handle, unsigned int Addr, unsigned int *pValue);
+static int SSP_Write(int Handle, unsigned int Addr, unsigned int Value);
+static int CheckHandle(int Handle);
+
+static void  SetSSPtoPS2(void);
+static void  SetSSPtoI2S(void);
+static void  SetSSPtoFLASH(void);
+static int  ReadIntoBuffer(void);
+
+static int SSP_Write_I2SCodec(int Handle, unsigned int RegAddr,unsigned int RegValue);
+
+/*
+ * Key buffer...
+ */
+#define KEYBUF_SIZE 256
+static unsigned int uiKeyBuffer[KEYBUF_SIZE];
+static spinlock_t ssp_spinlock = SPIN_LOCK_UNLOCKED;
+
+
+typedef enum{
+	SSP_MODE_UNKNOWN = 0,
+	SSP_MODE_PS2,
+	SSP_MODE_I2S,
+	SSP_MODE_FLASH,
+} SSPmodes_t;
+
+static struct timer_list g_KbdTimer;
+static SSPmodes_t gSSPmode = SSP_MODE_UNKNOWN;
+static SSPDataCallback gKeyCallback = 0;
+static int gHookedInterrupt = 0;
+
+/*
+ * Keep the last valid handle for SSP for kbd, i2s, and flash
+ */
+static int iLastValidHandle = -1;
+static int KeyboardHandle = 0;
+static int I2SHandle = 0;
+static int FlashHandle = 0;
+
+#define SSP_DEVICE_MASK    0xf0000000
+#define SSP_DEVICE_SHIFT	 28
+
+SSP_DRIVER_API SSPinstance =
+{
+	SSP_Open,
+	SSP_Read,
+	SSP_Write,
+	SSP_Close,
+};
+
+/*
+ * The only instance of this driver.
+ */
+SSP_DRIVER_API *SSPDriver = &SSPinstance;
+
+//=============================================================================
+// SSPIrqHandler
+//=============================================================================
+// This routine will get all of the keys out of the SPI FIFO.
+//=============================================================================
+static irqreturn_t SSPIrqHandler( int irq, void *dev_id)
+{
+	//
+	// Get key codes from SSP and send them to the keyboard callback.
+	//
+	ReadIntoBuffer();
+	
+	//
+	// Clear the interrupt.
+	//
+	outl( 0, SSPIIR );
+
+	return IRQ_HANDLED;
+}
+
+//=============================================================================
+// TimerRoutine
+//=============================================================================
+// This function is called periodically to make sure that no keys are stuck in
+// the SPI FIFO.  This is necessary because the SPI only interrupts on half
+// full FIFO which can leave up to one keyboard event in the FIFO until another
+// key is pressed.
+//=============================================================================
+static void TimerRoutine(unsigned long Data)
+{
+	int keycount;
+
+	//
+	// Get key codes from SSP and send them to the keyboard callback.
+	//
+	keycount = ReadIntoBuffer();
+	
+	//
+	// If no keys were received, call the Data callback anyway so it can
+	// check for stuck keys.
+	//
+	if( (keycount==0) && gKeyCallback )
+	{
+		gKeyCallback(-1);
+	}
+	
+	//
+	// Reschedule our timer in another 20 mSec.
+	//
+	g_KbdTimer.expires = jiffies + MSECS_TO_JIFFIES( EP93XX_KEY_TIMER_PERIOD_MSEC );
+	add_timer(&g_KbdTimer);
+}
+
+/*
+ * HookInterrupt
+ *
+ * Requests SSP interrupt, sets up interrupt handler, sets up keyboard polling
+ * timer.
+ */
+static int HookInterrupt(void)
+{
+	if (gHookedInterrupt)
+	{
+		printk( KERN_ERR "SSP driver interrupt already hooked\n");
+		return(-1);
+	}
+
+
+	if (request_irq(IRQ_EP93XX_SSP1RX, SSPIrqHandler, SA_INTERRUPT, "ep93xxsspd", 0))
+	{
+		printk( KERN_ERR "SSP driver failed to get IRQ handler\n");
+		return(-1);
+	}
+	
+	gHookedInterrupt = 1;
+
+	//
+	// Initialize the timer that we will use to poll the SPI.
+	//
+	init_timer(&g_KbdTimer);
+	g_KbdTimer.function = TimerRoutine;
+	g_KbdTimer.data = 1;
+	g_KbdTimer.expires = jiffies + MSECS_TO_JIFFIES( EP93XX_KEY_TIMER_PERIOD_MSEC );
+
+	add_timer(&g_KbdTimer);
+	
+	return(0);
+}
+
+static int SSP_Open(SSPDeviceType Device, SSPDataCallback Callback)
+{
+	int Handle;
+	
+	/*
+	 * Generate a handle and pass it back.
+	 *
+	 * Increment the last valid handle.
+	 * Check for wraparound (unlikely, but we like to be complete).
+	 */
+	iLastValidHandle++;
+	
+	if((iLastValidHandle & ~SSP_DEVICE_MASK) == 0)
+	{
+		/*
+		 * If we wrapped around start over.  Unlikely.
+		 */
+		iLastValidHandle = 1;
+	}
+	
+	Handle = iLastValidHandle | (Device << SSP_DEVICE_SHIFT);
+
+	switch (Device)
+	{
+		case PS2_KEYBOARD:
+		{
+			DPRINTK("SSP_Open - PS2_KEYBOARD\n");
+			if (KeyboardHandle)
+			{
+				return(-1);
+			}
+			else
+			{
+				DPRINTK("Handle:%08x  Callback:%08x  -- Success\n",
+					Handle, (unsigned int)Callback);
+
+				KeyboardHandle = Handle;
+				//
+				// Hook the interrupt if we have not yet.
+				//
+				HookInterrupt();
+				SetSSPtoPS2();
+				gKeyCallback = Callback;
+			}
+			break;
+		}
+		case I2S_CODEC:
+		{
+			DPRINTK("SSP_Open - I2S_CODEC\n");
+			if (I2SHandle)
+			{
+				return(-1);
+			}
+			else
+			{
+				DPRINTK("Handle:%08x  Callback:%08x  -- Success\n",
+					Handle, (unsigned int)Callback);
+
+				I2SHandle = Handle;
+			}
+			break;
+		}
+		case SERIAL_FLASH:
+		{
+			DPRINTK("SSP_Open - SERIAL_FLASH\n");
+			if (FlashHandle)
+			{
+				return(-1);
+			}
+			else
+			{
+				DPRINTK("Handle:%08x  Callback:%08x  -- Success\n",
+					Handle, (unsigned int)Callback);
+				FlashHandle = Handle;
+			}
+			break;
+		}
+		default:
+		{
+			return(-1);
+		}
+	}
+	
+	/*
+	 * Return the handle.
+	 */
+	return(Handle );
+}
+
+/*
+ * Release that Handle!
+ */
+static int SSP_Close(int Handle)
+{
+	//
+	// Find out which device this API was called for.
+	//
+	switch( CheckHandle(Handle) )
+	{
+		case PS2_KEYBOARD:
+		{
+			DPRINTK("SSP_Open - PS2_KEYBOARD\n");
+			del_timer(&g_KbdTimer);
+			free_irq(IRQ_EP93XX_SSP1RX, 0);
+			gKeyCallback = 0;
+			KeyboardHandle = 0;
+			gHookedInterrupt = 0;
+			break;
+		}
+		case I2S_CODEC:
+		{
+			DPRINTK("SSP_Open - I2S_CODEC\n");
+			I2SHandle = 0;
+			break;
+		}
+		case SERIAL_FLASH:
+		{
+			DPRINTK("SSP_Open - SERIAL_FLASH\n");
+			FlashHandle = 0;
+			break;
+		}
+		default:
+		{
+			return(-1);
+		}
+	}
+	return 0;
+}
+
+static int SSP_Read_FLASH
+(
+	int Handle,
+	unsigned int RegAddr,
+	unsigned int *pValue
+)
+{
+	SSPmodes_t saved_mode;
+
+	DPRINTK("SSP_Read_FLASH\n");
+
+	spin_lock(&ssp_spinlock);
+
+	/*
+	 * Save the SSP mode.  Switch to FLASH mode if we're not
+	 * already in FLASH mode.
+	 */
+	saved_mode = gSSPmode;
+	SetSSPtoFLASH();
+
+	/*
+	 * Let TX fifo clear out.  Poll the Transmit Fifo Empty bit.
+	 */
+	while( !( inl(SSPSR) & SSPSR_TFE ) )
+		barrier();
+
+	/*
+	 * Write the SPI read command.
+	 */
+	outl( 0x03, SSPDR );
+	outl( (RegAddr >> 16) & 255, SSPDR );
+	outl( (RegAddr >> 8) & 255, SSPDR );
+	outl( RegAddr & 255, SSPDR );
+
+	/*
+	 * Delay long enough for one byte to be transmitted.  It takes 7.6uS to
+	 * write a single byte.
+	 */
+	udelay(10);
+
+	/*
+	 * Read a byte to make sure the FIFO doesn't overrun.
+	 */
+	while( !( inl(SSPSR) & SSPSR_RNE ) )
+		barrier();
+	inl( SSPDR );
+
+	/*
+	 * Write four more bytes so that we can read four bytes.
+	 */
+	outl( 0, SSPDR );
+	outl( 0, SSPDR );
+	outl( 0, SSPDR );
+	outl( 0, SSPDR );
+
+	/*
+	 * Delay long enough for three bytes to be transmitted.  It takes 7.6uS
+	 * to write a single byte.
+	 */
+	udelay(25);
+
+	/*
+	 * Read three and throw away the next tree bytes.
+	 */
+	while( !( inl(SSPSR) & SSPSR_RNE ) )
+		barrier();
+	inl( SSPDR );
+	while( !( inl(SSPSR) & SSPSR_RNE ) )
+		barrier();
+	inl( SSPDR );
+	while( !( inl(SSPSR) & SSPSR_RNE ) )
+		barrier();
+	inl( SSPDR );
+
+	/*
+	 * Delay long enough for four bytes to be transmitted.  It takes 7.6uS
+	 * to write a single byte.
+	 */
+	udelay(30);
+
+	/*
+	 * Read the data word.
+	 */
+	while( !( inl(SSPSR) & SSPSR_RNE ) )
+		barrier();
+	*pValue = inl( SSPDR );
+	while( !( inl(SSPSR) & SSPSR_RNE ) )
+		barrier();
+	*pValue |= inl( SSPDR ) << 8;
+	while( !( inl(SSPSR) & SSPSR_RNE ) )
+		barrier();
+	*pValue |= inl( SSPDR ) << 16;
+	while( !( inl(SSPSR) & SSPSR_RNE ) )
+		barrier();
+	*pValue |= inl( SSPDR ) << 24;
+
+	/*
+	 * Wait until the transmit buffer is empty (it should be...).
+	 */
+	while( !( inl(SSPSR) & SSPSR_TFE ) )
+		barrier();
+
+	/*
+	 * Read any residual bytes in the receive buffer.
+	 */
+	while( inl(SSPSR) & SSPSR_RNE )
+		inl( SSPDR );
+	
+	/*
+	 * If we were in PS2 mode, switch back to PS2 mode.
+	 * If we weren't in PS2 mode, that means we didn't compile in
+	 * the PS2 keyboard support, so no need to switch to PS2 mode.
+	 */
+	if( saved_mode == SSP_MODE_PS2 )
+		SetSSPtoPS2();
+
+	spin_unlock(&ssp_spinlock);
+
+	/*
+	 * Return success.
+	 */
+	return 0;
+}
+
+static int SSP_Read(int Handle, unsigned int Addr, unsigned int *pValue)
+{
+	DPRINTK("SSP_Read\n");
+
+	/*
+	 * Find out which device this API was called for.
+	 */
+	switch( CheckHandle(Handle) )
+	{
+		case SERIAL_FLASH:
+		{
+			return SSP_Read_FLASH(Handle, Addr, pValue);
+		}
+		default:
+		{
+			return -1;
+		}
+	}
+}
+
+static int SSP_Write(int Handle, unsigned int Addr, unsigned int Value)
+{
+	int iRet = 0;
+	// DPRINTK("SSP_Write - Handle:0x%08x  Addr:0x%08x  Value:0x%08x\n",
+	//    Handle, Addr, Value );
+	
+	//
+	// Find out which device this API was called for.
+	//
+	switch( CheckHandle(Handle) )
+	{
+		case PS2_KEYBOARD:
+		{
+			break;
+		}
+		case I2S_CODEC:
+		{
+			iRet = SSP_Write_I2SCodec( Handle, Addr, Value );
+			break;
+		}
+		case SERIAL_FLASH:
+		{
+			break;
+		}
+		default:
+		{
+			return(-1);
+		}
+	}
+
+	return iRet;
+}
+
+static void SetSSPtoPS2(void)
+{
+	unsigned int uiRegTemp;
+	
+	if( gSSPmode == SSP_MODE_PS2 )
+	{
+		return;
+	}
+
+	/*
+	 * Disable the SSP, disable interrupts
+	 */
+	outl( 0, SSPCR1 );
+
+	/*
+	 * It takes almost a millisecond for a key to come in so
+	 * make sure we have completed all transactions.
+	 */
+	mdelay(1);
+
+	//
+	// Set EGPIO7 to disable EEPROM device on EDB9301, EDB9312, and EDB9315.
+	//
+	uiRegTemp = inl(GPIO_PADDR);
+	outl( uiRegTemp | 0x80, GPIO_PADDR );
+
+	uiRegTemp = inl(GPIO_PADR);
+	outl( uiRegTemp | 0x80, GPIO_PADR );
+
+	/*
+	 * Disable SFRM1 to I2S codec by setting EGPIO8 (port B, bit 0).
+	 * The EDB9315 board needs this but is harmless on the EDB9312 board.
+	 */
+#if defined(CONFIG_MACH_EDB9307) || defined(CONFIG_MACH_EDB9312) || defined(CONFIG_MACH_EDB9315)
+	uiRegTemp = inl(GPIO_PBDDR) | 0x01;
+	outl( uiRegTemp, GPIO_PBDDR );
+
+	uiRegTemp = inl(GPIO_PBDR) | 0x01;
+	outl( uiRegTemp, GPIO_PBDR );
+	
+	uiRegTemp = inl(GPIO_PBDR);
+#endif
+
+	/*
+	 * Disable SFRM1 to I2S codec I2S by setting EGPIO6 (port A, bit 6).
+	 * The EDB9301 board needs this
+	 */
+#if defined(CONFIG_MACH_EDB9301) || defined(CONFIG_MACH_EDB9302)|| \
+   defined(CONFIG_MACH_EDB9302A) || defined(CONFIG_MACH_EDB9307A) || defined(CONFIG_MACH_EDB9315A) 
+	uiRegTemp = inl(GPIO_PADDR);
+	outl( uiRegTemp | 0x40, GPIO_PADDR );
+
+	uiRegTemp = inl(GPIO_PADR);
+	outl( uiRegTemp | 0x40, GPIO_PADR );
+
+	uiRegTemp = inl(GPIO_PADR);
+#endif
+
+	/*
+	 * Still haven't enabled the keyboard.  So anything in
+	 * the rx fifo is garbage.  Time to take out the trash.
+	 */
+	while( inl(SSPSR) & SSPSR_RNE )
+	{
+		uiRegTemp = inl(SSPDR);
+	}
+
+	/*
+	 * SPICR0_SPO - SCLKOUT Polarity
+	 * SPICR0_SPH - SCLKOUT Phase
+	 * Motorola format, 11 bit, one start, 8 data, one bit for
+	 * parity, one stop bit.
+	 */
+	outl( (SSPCR0_FRF_MOTOROLA | SSPCR0_SPH | SSPCR0_SPO | SSPCR0_DSS_11BIT),
+	      SSPCR0 );
+	/*
+	 * Configure the device as a slave, Clear FIFO overrun interrupts,
+	 * enable interrupts and reset the device.
+	 */
+	outl( (SSPC1_MS | SSPC1_RIE | SSPC1_SOD), SSPCR1 );
+	outl( 0, SSPIIR );
+	outl( (SSPC1_MS | SSPC1_RIE | SSPC1_SOD | SSPC1_SSE), SSPCR1 );
+
+	/*
+	 * Configure EGPIO pins 12 and 14 as outputs because they are used
+	 * as buffer enables for the SPI interface to the ps2 keyboard.
+	 * Clear EGPIO pins 12 and 14, this will enable the SPI keyboard.
+	 */
+	uiRegTemp = inl(GPIO_PBDDR);
+	outl( uiRegTemp | 0x50, GPIO_PBDDR );
+
+	uiRegTemp = inl(GPIO_PBDR);
+	outl( uiRegTemp & ~0x50, GPIO_PBDR );
+
+	gSSPmode = SSP_MODE_PS2;
+}
+
+static void SetSSPtoI2S(void)
+{
+	unsigned int uiRegTemp;
+
+	if( gSSPmode == SSP_MODE_I2S )
+	{
+		return;
+	}
+	
+	/*
+	 * Disable recieve interrupts.
+	 */
+	outl( (SSPC1_MS | SSPC1_SSE), SSPCR1 );
+
+	/*
+	 * Set GPIO pins 12 and 14, this will bring the clock line low
+	 * which signals to the keyboard to buffer keystrokes.
+	 * Note that EGPIO 14 is the clock line and EGPIO 12 is data line.
+	 */
+	uiRegTemp = inl(GPIO_PBDR);
+	outl( 0x50 | uiRegTemp, GPIO_PBDR );
+
+	/*
+	 * It takes almost a millisecond for an partial keystrokes to come in.
+	 * Delay to make sure we have completed all transactions.
+	 */
+	mdelay(1);
+
+	/*
+	 * Anything we just recieved is garbage.  Time to take out the trash.
+	 */
+	while( inl(SSPSR) & SSPSR_RNE )
+	{
+		uiRegTemp = inl(SSPDR);
+	}
+	
+	/*
+	 * Disable the SSP and disable interrupts
+	 */
+	outl( 0, SSPCR1 );
+
+	/*
+	 * Clock will be 14.7 MHz divided by 4.
+	 */
+	outl( 2, SSPCPSR );
+
+	/*
+	 * Configure EGPIO7 as an output and set it.  This selects
+	 * I2S codec as the device on the SSP output instead of
+	 * the serial flash on EDB9312.  On EDB9301 and EDB9315 it
+	 * disables EEPROM but doesn't select anything.
+	 */
+	uiRegTemp = inl(GPIO_PADDR);
+	outl( uiRegTemp | 0x80, GPIO_PADDR );
+
+	uiRegTemp = inl(GPIO_PADR);
+	outl( uiRegTemp | 0x80, GPIO_PADR );
+
+	/*
+	 * Enable SFRM1 to I2S codec by clearing EGPIO8 (port B, bit 0).
+	 * The EDB9315 board needs this but is harmless on the EDB9312 board.
+	 */
+#if defined(CONFIG_MACH_EDB9307) || defined(CONFIG_MACH_EDB9312) || defined(CONFIG_MACH_EDB9315)
+	uiRegTemp = inl(GPIO_PBDDR) | 0x01;
+	outl( uiRegTemp, GPIO_PBDDR );
+
+	uiRegTemp = inl(GPIO_PBDR) & 0xfe;
+	outl( uiRegTemp, GPIO_PBDR );
+	
+	uiRegTemp = inl(GPIO_PBDR);
+#endif
+
+	/*
+	 * Enable SFRM1 to I2S codec I2S by clearing EGPIO6 (port A, bit 6).
+	 * The EDB9301 board needs this
+	 */
+#if defined(CONFIG_MACH_EDB9301) || defined(CONFIG_MACH_EDB9302) || \
+    defined(CONFIG_MACH_EDB9302A) || defined(CONFIG_MACH_EDB9307A) || defined(CONFIG_MACH_EDB9315A)
+	uiRegTemp = inl(GPIO_PADDR);
+	outl( uiRegTemp | 0x40, GPIO_PADDR );
+
+	uiRegTemp = inl(GPIO_PADR);
+	outl( uiRegTemp & ~0x40, GPIO_PADR );
+
+	uiRegTemp = inl(GPIO_PADR);
+#endif
+
+	/*
+	 * Motorola format, 8 bit.
+	 */
+	outl( (SSPCR0_SPO | SSPCR0_SPH | SSPCR0_FRF_MOTOROLA | SSPCR0_DSS_8BIT),
+	      SSPCR0 );
+
+	/*
+	 * Configure the device as master, reenable the device.
+	 */
+	outl( SSPC1_SSE, SSPCR1 );
+
+	gSSPmode = SSP_MODE_I2S;
+
+	udelay(10);
+}
+
+static void SetSSPtoFLASH(void)
+{
+	unsigned int uiRegTemp;
+
+	if( gSSPmode == SSP_MODE_FLASH)
+		return;
+
+	/*
+	 * Disable recieve interrupts.
+	 */
+	outl( (SSPC1_MS | SSPC1_SSE), SSPCR1 );
+
+	/*
+	 * Set GPIO pins 12 and 14, this will bring the clock line low
+	 * which signals to the keyboard to buffer keystrokes.
+	 * Note that EGPIO 14 is the clock line and EGPIO 12 is data line.
+	 */
+	outl( inl(GPIO_PBDR) | 0x50, GPIO_PBDR );
+
+	/*
+	 * It takes almost a millisecond for an partial keystrokes to come in.
+	 * Delay to make sure we have completed all transactions.
+	 */
+	mdelay(1);
+
+	/*
+	 * Anything we just recieved is garbage.  Time to take out the trash.
+	 */
+	while( inl(SSPSR) & SSPSR_RNE )
+		inl(SSPDR);
+	
+	/*
+	 * Disable the SSP and disable interrupts
+	 */
+	outl( 0, SSPCR1 );
+
+	/*
+	 * Clock will be 14.7 MHz divided by 14.
+	 */
+	outl( 2, SSPCPSR );
+
+	/*
+	 * Configure EGPIO7 as an output and clear it.  This selects
+	 * serial flash as the device on the SSP output instead of
+	 * the I2S codec and is valid for EDB9301, EDB9312, and EDB9315.
+	 */
+	outl( inl(GPIO_PADDR) | 0x80, GPIO_PADDR );
+	outl( inl(GPIO_PADR) & ~0x80, GPIO_PADR );
+
+	/*
+	 * Disable SFRM1 to I2S codec by setting EGPIO8 (port B, bit 0).
+	 * The EDB9315 board needs this but is harmless on the EDB9312 board.
+	 */
+#if defined(CONFIG_MACH_EDB9307) || defined(CONFIG_MACH_EDB9312) || defined(CONFIG_MACH_EDB9315)
+	uiRegTemp = inl(GPIO_PBDDR) | 0x01;
+	outl( uiRegTemp, GPIO_PBDDR );
+
+	uiRegTemp = inl(GPIO_PBDR) | 0x01;
+	outl( uiRegTemp, GPIO_PBDR );
+	
+	uiRegTemp = inl(GPIO_PBDR);
+#endif
+
+	/*
+	 * Disable SFRM1 to I2S codec I2S by setting EGPIO6 (port A, bit 6).
+	 * The EDB9301 board needs this
+	 */
+#if defined(CONFIG_MACH_EDB9301) || defined(CONFIG_MACH_EDB9302) || \
+    defined(CONFIG_MACH_EDB9302A) || defined(CONFIG_MACH_EDB9307A) || defined(CONFIG_MACH_EDB9315A)
+	uiRegTemp = inl(GPIO_PADDR);
+	outl( uiRegTemp | 0x40, GPIO_PADDR );
+
+	uiRegTemp = inl(GPIO_PADR);
+	outl( uiRegTemp | 0x40, GPIO_PADR );
+
+	uiRegTemp = inl(GPIO_PBDR);
+#endif
+
+	/*
+	 * Motorola format, 8 bit.
+	 */
+	outl( ((6 << SSPCR0_SCR_SHIFT) | SSPCR0_SPO | SSPCR0_SPH |
+	       SSPCR0_FRF_MOTOROLA | SSPCR0_DSS_8BIT),
+	      SSPCR0 );
+
+	/*
+	 * Configure the device as master, reenable the device.
+	 */
+	outl( SSPC1_SSE, SSPCR1 );
+
+	gSSPmode = SSP_MODE_FLASH;
+
+	udelay(10);
+}
+
+/*
+ *  CheckHandle
+ *
+ *  If Handle is valid, returns 0.  Otherwise it returns -1.
+ */
+static int CheckHandle(int Handle)
+{
+	int iRet;
+
+	if ((Handle != KeyboardHandle) &&
+	    (Handle != I2SHandle) &&
+	    (Handle != FlashHandle))
+	{
+		DPRINTK("OOPS! Invalid SSP Handle!\n");
+		return(-1);
+	}
+
+	/*
+	 * Get the SSP driver instance number from the handle.
+	 */
+	iRet = (((int)Handle & SSP_DEVICE_MASK) >> SSP_DEVICE_SHIFT);
+
+	return iRet;
+}
+
+/*
+ * ReadIntoBuffer
+ *
+ * Drains the SSP rx fifo into a buffer here.  If we overflow this buffer
+ * then something's wrong.
+ */
+static int ReadIntoBuffer(void)
+{
+	unsigned int count, index, saved_count, uiRegTemp;
+	
+	count = 0;
+	index = 0;
+
+
+	if( gSSPmode != SSP_MODE_PS2 )
+	{
+		return 0;
+	}
+	
+	/*
+	 * This spinlock will prevent I2S from grabbing the SSP to do a
+	 * write while we are using the SSP for PS2.
+	 *
+	 * There is a slight chance that we are in the beginning phase
+	 * of doing an I2S write but the mode flag hadn't yet switched
+	 * to I2S.  If that happens we will end up waiting on I2S to
+	 * finish a write.  Not great.
+	 */
+	spin_lock(&ssp_spinlock);
+
+	while( inl(SSPSR) & SSPSR_RNE)
+	{
+		/*
+		 * Read in the value from the SPI controller into
+		 * the partial key buffer.
+		 */
+		uiKeyBuffer[count] = inl(SSPDR);
+		if (((uiKeyBuffer[count] & 0x3fc) != 0x3e0) &&
+			((uiKeyBuffer[count] & 0x3fc) != 0x3c0))
+		{
+			/*
+			 * Set GPIO pins 12 and 14, this will bring the clock line low
+			 * which signals to the keyboard to buffer keystrokes.
+			 * Note that EGPIO 14 is the clock line and EGPIO 12 is data line.
+			 */
+			uiRegTemp = inl(GPIO_PBDR);
+			outl( 0x50 | uiRegTemp, GPIO_PBDR );
+
+			outl( 0, SSPCR1 );
+			outl( (SSPC1_MS | SSPC1_RIE | SSPC1_SSE), SSPCR1 );
+
+			/*
+			 * Clear EGPIO pins 12 and 14, this will enable the SPI keyboard.
+			 */
+			uiRegTemp = inl(GPIO_PBDR);
+			outl( uiRegTemp & ~0x50, GPIO_PBDR );
+
+			count++;
+			break;
+		}
+		count++;
+	}
+
+	saved_count = count;
+	index = 0;
+	while (count)
+	{
+		//
+		// No callback, dump data.
+		//
+		if (gKeyCallback)
+		{
+			gKeyCallback(uiKeyBuffer[index++]);
+		}
+		count--;
+	}
+
+	spin_unlock(&ssp_spinlock);
+
+	return saved_count;
+}
+
+/*
+ * SSP_Write_I2SCodec
+ *
+ */
+static int SSP_Write_I2SCodec
+(
+	int Handle,
+	unsigned int RegAddr,
+	unsigned int RegValue
+)
+{
+	SSPmodes_t saved_mode;
+
+	DPRINTK("SSP_Write_I2SCodec\n");
+
+	spin_lock(&ssp_spinlock);
+
+	/*
+	 * Save the SSP mode.  Switch to I2S mode if we're not
+	 * already in I2S mode.
+	 */
+	saved_mode = gSSPmode;
+	SetSSPtoI2S();
+
+	/*
+	 * Let TX fifo clear out.  Poll the Transmit Fifo Empty bit.
+	 */
+	while( !( inl(SSPSR) & SSPSR_TFE ) );
+	
+	/*
+	 * Write the data out to the tx fifo.
+	 */
+	outl( 0x20, SSPDR ); /* chip address for CS4228 */
+	outl( (RegAddr & 0xff), SSPDR );
+	outl( (RegValue & 0xff), SSPDR );
+
+	/*
+	 * Let TX fifo clear out.  Poll the Transmit Fifo Empty bit.
+	 */
+	while( !( inl(SSPSR) & SSPSR_TFE ) );
+
+	/*
+	 * Delay to let stuff make it out of the SR before doing
+	 * anthing else to the SSP.  It takes 6.8 uSec to do a
+	 * I2S codec register write.
+	 */
+	udelay(10);
+
+	/*
+	 * If we were in PS2 mode, switch back to PS2 mode.
+	 * If we weren't in PS2 mode, that means we didn't compile in
+	 * the PS2 keyboard support, so no need to switch to PS2 mode.
+	 */
+	if( saved_mode == SSP_MODE_PS2 )
+	{
+		SetSSPtoPS2();
+	}
+
+	spin_unlock(&ssp_spinlock);
+
+	/*
+	 * Return success.
+	 */
+	return 0;
+}
diff -burN linux-2.6.20.4/drivers/i2c/busses/i2c-ep93xx.c linux/drivers/i2c/busses/i2c-ep93xx.c
--- linux-2.6.20.4/drivers/i2c/busses/i2c-ep93xx.c	1970-01-01 08:00:00.000000000 +0800
+++ linux/drivers/i2c/busses/i2c-ep93xx.c	2007-03-29 11:45:03.000000000 +0800
@@ -0,0 +1,194 @@
+/* ------------------------------------------------------------------------ *
+ * i2c-ep933xx.c I2C bus glue for Cirrus EP93xx                             *
+ * ------------------------------------------------------------------------ *
+
+   Copyright (C) 2004 Michael Burian
+   
+   Based on i2c-parport-light.c
+   Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org>
+  
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ------------------------------------------------------------------------ */
+
+
+//#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+
+//1/(2*clockfrequency)
+#define EE_DELAY_USEC       50
+#define GPIOG_EECLK 1
+#define GPIOG_EEDAT 2
+
+/* ----- I2C algorithm call-back functions and structures ----------------- */
+
+// TODO: optimize
+static void ep93xx_setscl(void *data, int state)
+{
+	unsigned int uiPGDR, uiPGDDR;
+
+	uiPGDR = inl(GPIO_PGDR);
+	uiPGDDR = inl(GPIO_PGDDR);
+
+	/* Configure the clock line as output. */
+	uiPGDDR |= GPIOG_EECLK;
+	outl(uiPGDDR, GPIO_PGDDR);
+
+	/* Set clock line to state */
+	if(state)
+		uiPGDR |= GPIOG_EECLK;
+	else
+		uiPGDR &= ~GPIOG_EECLK;
+	
+	outl(uiPGDR, GPIO_PGDR);
+}
+
+static void ep93xx_setsda(void *data, int state)
+{
+	unsigned int uiPGDR, uiPGDDR;
+	
+	uiPGDR = inl(GPIO_PGDR);
+	uiPGDDR = inl(GPIO_PGDDR);
+
+	/* Configure the data line as output. */
+	uiPGDDR |= GPIOG_EEDAT;
+	outl(uiPGDDR, GPIO_PGDDR);
+
+	/* Set data line to state */
+	if(state)
+		uiPGDR |= GPIOG_EEDAT;
+	else
+		uiPGDR &= ~GPIOG_EEDAT;
+	
+	outl(uiPGDR, GPIO_PGDR);
+}
+
+static int ep93xx_getscl(void *data)
+{
+	unsigned int uiPGDR, uiPGDDR;
+	
+	uiPGDR = inl(GPIO_PGDR);
+	uiPGDDR = inl(GPIO_PGDDR);
+
+	/* Configure the clock line as input */
+	uiPGDDR &= ~GPIOG_EECLK;
+	outl(uiPGDDR, GPIO_PGDDR);
+	
+	/* Return state of the clock line */
+	return (inl(GPIO_PGDR) & GPIOG_EECLK) ? 1 : 0;
+}
+
+static int ep93xx_getsda(void *data)
+{
+	unsigned int uiPGDR, uiPGDDR;
+	uiPGDR = inl(GPIO_PGDR);
+	uiPGDDR = inl(GPIO_PGDDR);
+
+	/* Configure the data line as input */
+	uiPGDDR &= ~GPIOG_EEDAT;
+	outl(uiPGDDR, GPIO_PGDDR);
+
+	/* Return state of the data line */
+	return (inl(GPIO_PGDR) & GPIOG_EEDAT) ? 1 : 0;
+}
+
+/* ------------------------------------------------------------------------
+ * Encapsulate the above functions in the correct operations structure.
+ * This is only done when more than one hardware adapter is supported.
+ */
+
+/* last line (us, ms, timeout)
+ * us dominates the bit rate: 10us  means: 100Kbit/sec(25 means 40kbps)
+ *                            10ms  not known
+ *                            100ms timeout
+ */
+static struct i2c_algo_bit_data ep93xx_data = {
+	.setsda		= ep93xx_setsda,
+	.setscl		= ep93xx_setscl,
+	.getsda		= ep93xx_getsda,
+	.getscl		= ep93xx_getscl,
+	.udelay		= 10,
+	//.mdelay		= 10,
+	.timeout	= HZ,
+};
+
+/* ----- I2c structure ---------------------------------------------------- */
+static struct i2c_adapter ep93xx_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON,
+	.id		= I2C_HW_B_LP,
+	.algo_data	= &ep93xx_data,
+	.name		= "EP93XX I2C bit-bang interface",
+};
+
+/* ----- Module loading, unloading and information ------------------------ */
+
+static int __init i2c_ep93xx_init(void)
+{
+	unsigned long uiPGDR, uiPGDDR;
+	
+	/* Read the current value of the GPIO data and data direction registers. */
+	uiPGDR = inl(GPIO_PGDR);
+	uiPGDDR = inl(GPIO_PGDDR);
+	
+	/* If the GPIO pins have not been configured since reset, the data 
+	 * and clock lines will be set as inputs and with data value of 0.
+	 * External pullup resisters are pulling them high.
+	 * Set them both high before configuring them as outputs. */
+	uiPGDR |= (GPIOG_EEDAT | GPIOG_EECLK);
+	outl(uiPGDR, GPIO_PGDR);
+
+	/* Delay to meet the EE Interface timing specification. */
+	udelay(EE_DELAY_USEC);
+
+	
+	/* Configure the EE data and clock lines as outputs. */
+	uiPGDDR |= (GPIOG_EEDAT | GPIOG_EECLK);
+	outl(uiPGDDR, GPIO_PGDDR);
+
+	/* Delay to meet the EE Interface timing specification. */
+	udelay(EE_DELAY_USEC);
+
+	/* Reset hardware to a sane state (SCL and SDA high) */
+	ep93xx_setsda(NULL, 1);
+	ep93xx_setscl(NULL, 1);
+
+	if (i2c_bit_add_bus(&ep93xx_adapter) > 0) {
+		printk(KERN_ERR "i2c-ep93xx: Unable to register with I2C\n");
+		return -ENODEV;
+	}
+	
+	return 0;
+}
+
+static void __exit i2c_ep93xx_exit(void)
+{
+	//i2c_bit_del_bus(&ep93xx_adapter);
+	i2c_del_adapter(&ep93xx_adapter);
+}
+
+MODULE_AUTHOR("Michael Burian");
+MODULE_DESCRIPTION("I2C bus glue for Cirrus EP93xx processors");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_ep93xx_init);
+module_exit(i2c_ep93xx_exit);
diff -burN linux-2.6.20.4/drivers/i2c/busses/Kconfig linux/drivers/i2c/busses/Kconfig
--- linux-2.6.20.4/drivers/i2c/busses/Kconfig	2007-04-24 10:43:19.000000000 +0800
+++ linux/drivers/i2c/busses/Kconfig	2007-03-28 10:59:18.000000000 +0800
@@ -5,6 +5,10 @@
 menu "I2C Hardware Bus support"
 	depends on I2C
 
+config I2C_EP93XX
+	tristate "EP93XX I2C"
+	depends on I2C && ARCH_EP93XX
+
 config I2C_ALI1535
 	tristate "ALI 1535"
 	depends on I2C && PCI
diff -burN linux-2.6.20.4/drivers/i2c/busses/Makefile linux/drivers/i2c/busses/Makefile
--- linux-2.6.20.4/drivers/i2c/busses/Makefile	2007-04-24 10:43:19.000000000 +0800
+++ linux/drivers/i2c/busses/Makefile	2007-03-28 11:00:01.000000000 +0800
@@ -46,6 +46,7 @@
 obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
 obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
 obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
+obj-$(CONFIG_I2C_EP93XX)        += i2c-ep93xx.o
 
 ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
 EXTRA_CFLAGS += -DDEBUG
diff -burN linux-2.6.20.4/drivers/ide/arm/ide_arm.c linux/drivers/ide/arm/ide_arm.c
--- linux-2.6.20.4/drivers/ide/arm/ide_arm.c	2007-04-24 10:43:19.000000000 +0800
+++ linux/drivers/ide/arm/ide_arm.c	2007-04-09 16:16:00.000000000 +0800
@@ -7,6 +7,8 @@
  * May be copied or modified under the terms of the GNU General Public License.
  */
 
+#include <linux/autoconf.h>
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/ide.h>
@@ -30,14 +32,24 @@
 # define IDE_ARM_IRQ	IRQ_HARDDISK
 #endif
 
+#ifdef CONFIG_BLK_DEV_IDE_EP93XX
+#include <asm/arch/ide.h>
+#endif
+
 void __init ide_arm_init(void)
 {
 	if (IDE_ARM_HOST) {
 		hw_regs_t hw;
 
 		memset(&hw, 0, sizeof(hw));
+#ifdef CONFIG_BLK_DEV_IDE_EP93XX
+                //#include <asm/arch/ide.h>
+                old_ide_init_default_hwifs();
+                //ide_init_default_hwifs();
+#else
 		ide_std_init_ports(&hw, IDE_ARM_IO, IDE_ARM_IO + 0x206);
 		hw.irq = IDE_ARM_IRQ;
 		ide_register_hw(&hw, NULL);
+#endif
 	}
 }
diff -burN linux-2.6.20.4/drivers/ide/arm/ide-dma-ep93xx.c linux/drivers/ide/arm/ide-dma-ep93xx.c
--- linux-2.6.20.4/drivers/ide/arm/ide-dma-ep93xx.c	1970-01-01 08:00:00.000000000 +0800
+++ linux/drivers/ide/arm/ide-dma-ep93xx.c	2007-04-09 16:16:36.000000000 +0800
@@ -0,0 +1,1255 @@
+/******************************************************************************
+ * drivers/ide/arm/ide-dma-ep93xx.c
+ *
+ * Support for IDE UDMA
+ * Version 1.0 for EP93XX-E1
+ *
+ * Copyright (C) 2005  Cirrus Logic
+ *
+ * A large portion of this file is based on the ide-dma.c
+ * and the respective pmac version of it
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ ****************************************************************************/
+#include <linux/autoconf.h>
+#include <linux/ide.h>
+#include <linux/delay.h>
+#include <linux/proc_fs.h>
+#include <asm/io.h>
+#include <asm/ide.h>
+#include <asm/irq.h>
+#include <asm/arch/ide.h>
+#include <asm/arch/dma.h>
+#include <asm/hardware.h>
+
+//#define EP93XX_IDE_DMA_DEBUG
+//#define DEBUG_VADDR
+
+#ifdef EP93XX_IDE_DMA_DEBUG
+#define DPRINTK( fmt, arg... )  printk( fmt, ##arg )
+#else
+#define DPRINTK( fmt, arg... )
+#endif
+
+static void
+ep93xx_set_pio(void);
+
+
+#define ep93xx_ide_dma_intr 0
+/*
+//this functions comes from PCI PC land
+ide_startstop_t ide_dma_intr (ide_drive_t *drive)
+{
+	u8 stat = 0, dma_stat = 0;
+	
+	DPRINTK("%s\n", __FUNCTION__);
+
+	dma_stat = HWIF(drive)->ide_dma_end(drive);
+	stat = HWIF(drive)->INB(IDE_STATUS_REG);	//get drive status 
+	if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) {
+		if (!dma_stat) {
+			struct request *rq = HWGROUP(drive)->rq;
+
+			DRIVER(drive)->end_request(drive, 1, rq->nr_sectors);
+			return ide_stopped;
+		}
+		printk(KERN_ERR "%s: dma_intr: bad DMA status (dma_stat=%x)\n", 
+		       drive->name, dma_stat);
+	}
+	return DRIVER(drive)->error(drive, "dma_intr", stat);
+}
+*/
+
+/*****************************************************************************
+ *
+ * ep93xx_config_ide_device()
+ *
+ * This function sets up the ep93xx ide device for a dma transfer by first
+ * probing to find the best dma mode supported by the device.
+ *
+ * Returns a 0 for success, and a 1 otherwise.
+ *
+ ****************************************************************************/
+static unsigned int
+ep93xx_config_ide_device(ide_drive_t *drive)
+{
+        unsigned int   ulChipID;
+	byte transfer = 0;
+
+	DPRINTK("%s: ep93xx_config_ide_device\n", drive->name);
+
+	/*
+	 * Determine the best transfer speed supported.  On Rev D1/E0
+     * the maximum DMA mode is 2.  On Rev E1 the maximum UDMA mode is 3.
+	 */
+	transfer = ide_dma_speed(drive, 1); //mode1=udma0..2, mode2=udma2..4
+  	
+	/*
+	 * Do nothing if a DMA mode is not supported or if the drive supports
+         * MDMA.
+	 */
+	if(transfer == XFER_MW_DMA_2 || transfer == XFER_MW_DMA_1 || 
+		transfer == XFER_MW_DMA_0 || transfer == 0) {
+printk("	device only supports MDMA ? (we're hosed)\n");
+                return 1;  
+	}
+
+	ulChipID = inl(SYSCON_CHIPID);
+	if(transfer == XFER_UDMA_3 && ((ulChipID &  SYSCON_CHIPID_REV_MASK)>>SYSCON_CHIPID_REV_SHIFT) != 0x6)
+	{
+		transfer = XFER_UDMA_2; 
+        }
+
+	DPRINTK("configuring the HDD for this transfer: ");
+	/*
+	 * Configure the drive.
+	 */
+	if (ide_config_drive_speed(drive, transfer) == 0) {
+		/*
+		 * Hold on to this value for use later.
+		 */
+printk("	device configured for speed X%d\n", transfer ); 
+		drive->current_speed = transfer;
+
+		/*
+		 * Success, so turn on DMA.
+		 */
+		return HWIF(drive)->ide_dma_on(drive);
+	} 
+	else
+		return 1;  
+}
+
+
+
+
+static int g_prd_count=0;
+static int g_pwr_count=0;
+
+
+
+//from include/asm/dma-mapping.h
+//static inline int
+//dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+//	   enum dma_data_direction dir)
+
+//#define MAP_SG(a,b,c,d)		dma_map_sg( (struct device *) (a), (b), (c), (d) )
+//#define UNMAP_SG(a,b,c,d)	dma_unmap_sg( (struct device *) (a), (b), (c), (d) )
+
+#define MAP_SG(a,b,c,d)		dma_map_sg( NULL, (b), (c), (d) )
+#define UNMAP_SG(a,b,c,d)	dma_unmap_sg( NULL, (b), (c), (d) )
+
+/*
+ * Needed for allowing full modular support of ide-driver
+ */
+static int ep93xx_ide_release_dma_engine (ide_hwif_t *hwif)
+{
+	if (hwif->dmatable_cpu) 
+	{
+	    kfree(hwif->dmatable_cpu);
+	    hwif->dmatable_cpu = NULL;
+	}
+	if (hwif->sg_table) 
+	{
+	    kfree(hwif->sg_table);
+	    hwif->sg_table = NULL;
+	}
+
+
+	return 1;
+}
+
+
+int ep93xx_ide_allocate_dma_engine (ide_hwif_t *hwif)
+{
+	
+	/*
+	 * Allocate memory for the DMA table.
+	 */
+	hwif->dmatable_cpu = kmalloc(PRD_ENTRIES * PRD_BYTES, GFP_KERNEL);
+
+	/*
+	 * Check if we allocated memory for dma
+	 */
+	if (hwif->dmatable_cpu == NULL) 
+	{
+		printk("%s: SG-DMA disabled, UNABLE TO ALLOCATE DMA TABLES\n", hwif->name);
+		return 1;
+	}
+
+	/*
+	 * Allocate memory for the scatterlist structures.
+	 */
+	hwif->sg_table = kmalloc(sizeof(struct scatterlist) * PRD_ENTRIES, GFP_KERNEL);
+
+	/*
+	 * Check if we allocated the memory we expected to.
+	 */
+	if (hwif->sg_table == NULL) 
+	{
+		/*
+		 *  Fail, so clean up.
+		 */
+		kfree(hwif->dmatable_cpu );
+		printk("%s: SG-DMA disabled, UNABLE TO ALLOCATE DMA TABLES\n", hwif->name);
+		return 1;
+	}
+
+    return 0;
+}
+
+
+/**
+ *	config_drive_for_dma	-	attempt to activate IDE DMA
+ *	@drive: the drive to place in DMA mode
+ *
+ *	If the drive supports at least mode 2 DMA or UDMA of any kind
+ *	then attempt to place it into DMA mode. Drives that are known to
+ *	support DMA but predate the DMA properties or that are known
+ *	to have DMA handling bugs are also set up appropriately based
+ *	on the good/bad drive lists.
+ */
+ 
+static int config_drive_for_dma (ide_drive_t *drive)
+{
+	struct hd_driveid *id = drive->id;
+	ide_hwif_t *hwif = HWIF(drive);
+
+        DPRINTK("%s\n", __FUNCTION__ );
+
+	if ((id->capability & 1) && hwif->autodma) 
+	{
+		/* Consult the list of known "bad" drives */
+		if (__ide_dma_bad_drive(drive))
+			return __ide_dma_off(drive);
+
+		DPRINTK("	drive seems ok\n");
+
+#ifdef EP93XX_IDE_DMA_DEBUG
+		if (id->field_valid & 4)
+		{
+		    printk("	supports UDMA : 0x%08x\n", id->dma_ultra );
+		}
+#endif
+
+		/*
+		 * Enable DMA on any drive that has
+		 * UltraDMA (mode 0/1/2/3/4/5/6) enabled
+		 * ep93xx supports up to udma2 
+		 */
+		 
+		if ( (id->field_valid & 4) && ( id->dma_ultra & 0x7f) )
+		{
+			DPRINTK("enabling UDMA\n");
+			return hwif->ide_dma_on(drive);
+		}
+
+		// ep93xx can't do mdma/sdma
+	}
+
+	return hwif->ide_dma_off_quietly(drive);
+}
+
+
+
+/**
+ *	ep93xx_ide_dma_check		-	check DMA setup
+ *	@drive: drive to check
+ *
+ */
+ 
+static int ep93xx_ide_dma_check (ide_drive_t *drive)
+{
+        DPRINTK("%s\n", __FUNCTION__ );
+
+	config_drive_for_dma(drive);
+	return ep93xx_config_ide_device(drive);
+}
+
+
+/**
+ *	ide_build_sglist	-	map IDE scatter gather for DMA I/O
+ *	@drive: the drive to build the DMA table for
+ *	@rq: the request holding the sg list
+ *
+ *	Perform the PCI mapping magic necessary to access the source or
+ *	target buffers of a request via PCI DMA. The lower layers of the
+ *	kernel provide the necessary cache management so that we can
+ *	operate in a portable fashion
+ */
+
+static int ide_build_sglist(ide_drive_t *drive, struct request *rq)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	struct scatterlist *sg = hwif->sg_table;
+	int nents;
+#ifdef DEBUG_VADDR
+	u32 vaddr;
+	vaddr = (u32) rq->buffer;
+	printk("vaddr=0x%08x, paddr=0x%08x\n", (int) vaddr, (int) virt_to_dma(NULL,vaddr) );
+#endif	
+	//if (hwif->sg_dma_active)
+	//	BUG();
+
+	nents = blk_rq_map_sg(drive->queue, rq, sg);
+		
+	if (rq_data_dir(rq) == READ)
+		hwif->sg_dma_direction = PCI_DMA_FROMDEVICE;
+	else
+		hwif->sg_dma_direction = PCI_DMA_TODEVICE;
+
+	return MAP_SG(hwif->pci_dev, sg, nents, hwif->sg_dma_direction);
+}
+
+
+//comes from PCI PC land
+/**
+ *	ide_raw_build_sglist	-	map IDE scatter gather for DMA
+ *	@drive: the drive to build the DMA table for
+ *	@rq: the request holding the sg list
+ *
+ *	Perform the PCI mapping magic necessary to access the source or
+ *	target buffers of a taskfile request via PCI DMA. The lower layers 
+ *	of the  kernel provide the necessary cache management so that we can
+ *	operate in a portable fashion
+ */
+
+static int ide_raw_build_sglist(ide_drive_t *drive, struct request *rq)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	struct scatterlist *sg = hwif->sg_table;
+	int nents = 0;
+	ide_task_t *args = rq->special;
+	u8 *virt_addr = rq->buffer;
+	int sector_count = rq->nr_sectors;
+#ifdef DEBUG_VADDR
+	u32 vaddr;
+	vaddr = (u32) rq->buffer;
+	printk("vaddr=0x%08x, paddr=0x%08x\n", (int) vaddr, (int) virt_to_dma(NULL, vaddr) );
+#endif	
+
+	if (args->command_type == IDE_DRIVE_TASK_RAW_WRITE)
+		hwif->sg_dma_direction = PCI_DMA_TODEVICE;
+	else
+		hwif->sg_dma_direction = PCI_DMA_FROMDEVICE;
+
+#if 1
+	if (sector_count > 256)
+		BUG();
+
+	if (sector_count > 128) {
+#else
+	while (sector_count > 128) {
+#endif
+		memset(&sg[nents], 0, sizeof(*sg));
+		sg[nents].page = virt_to_page(virt_addr);
+		sg[nents].offset = offset_in_page(virt_addr);
+		sg[nents].length = 128  * SECTOR_SIZE;
+		nents++;
+		virt_addr = virt_addr + (128 * SECTOR_SIZE);
+		sector_count -= 128;
+	}
+	memset(&sg[nents], 0, sizeof(*sg));
+	sg[nents].page = virt_to_page(virt_addr);
+	sg[nents].offset = offset_in_page(virt_addr);
+	sg[nents].length =  sector_count  * SECTOR_SIZE;
+	nents++;
+
+	return MAP_SG(hwif->pci_dev, sg, nents, hwif->sg_dma_direction);
+}
+
+//comes from PCI PC land
+/**
+ *	ide_build_dmatable	-	build IDE DMA table
+ *
+ *	ide_build_dmatable() prepares a dma request. We map the command
+ *	to get the pci bus addresses of the buffers and then build up
+ *	the PRD table that the IDE layer wants to be fed. The code
+ *	knows about the 64K wrap bug in the CS5530.
+ *
+ *	Returns 0 if all went okay, returns 1 otherwise.
+ *	May also be invoked from trm290.c
+ */
+ 
+static int ep93xx_ide_build_dmatable (ide_drive_t *drive, struct request *rq)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	unsigned int *table	= hwif->dmatable_cpu;
+	unsigned int count = 0;
+	int i;
+	struct scatterlist *sg;
+
+	if (HWGROUP(drive)->rq->cmd_type & /*REQ_DRIVE_TASKFILE*/REQ_TYPE_ATA_TASKFILE)
+		hwif->sg_nents = i = ide_raw_build_sglist(drive, rq);
+	else
+		hwif->sg_nents = i = ide_build_sglist(drive, rq);
+
+	if (!i)
+		return 0;
+
+	sg = hwif->sg_table;
+	while (i) {
+		u32 cur_addr;
+		u32 cur_len;
+
+		cur_addr = sg_dma_address(sg);
+		cur_len = sg_dma_len(sg);
+
+		/*
+		 * Fill in the dma table, without crossing any 64kB boundaries.
+		 * Most hardware requires 16-bit alignment of all blocks,
+		 * but the trm290 requires 32-bit alignment.
+		 */
+
+		while (cur_len) {
+			if (count++ >= PRD_ENTRIES) {
+				printk(KERN_ERR "%s: DMA table too small\n", drive->name);
+				goto use_pio_instead;
+			} else {
+				u32 xcount, bcount = 0x10000 - (cur_addr & 0xffff);
+
+				if (bcount > cur_len)
+					bcount = cur_len;
+				*table++ = cpu_to_le32(cur_addr);
+				xcount = bcount & 0xffff;
+
+				if (xcount == 0x0000) {
+	/* 
+	 * Most chipsets correctly interpret a length of 0x0000 as 64KB,
+	 * but at least one (e.g. CS5530) misinterprets it as zero (!).
+	 * So here we break the 64KB entry into two 32KB entries instead.
+	 */
+					if (count++ >= PRD_ENTRIES) {
+						printk(KERN_ERR "%s: DMA table too small\n", drive->name);
+						goto use_pio_instead;
+					}
+					*table++ = cpu_to_le32(0x8000);
+					*table++ = cpu_to_le32(cur_addr + 0x8000);
+					xcount = 0x8000;
+				}
+				*table++ = cpu_to_le32(xcount);
+				cur_addr += bcount;
+				cur_len -= bcount;
+			}
+		}
+
+		sg++;
+		i--;
+	}
+
+	if (count) {
+			*--table |= cpu_to_le32(0x80000000);
+		return count;
+	}
+
+	printk(KERN_ERR "%s: empty DMA table?\n", drive->name);
+
+use_pio_instead:
+
+	UNMAP_SG(hwif->pci_dev,
+		     hwif->sg_table,
+		     hwif->sg_nents,
+		     hwif->sg_dma_direction);
+
+	//hwif->sg_dma_active = 0;
+
+	return 0; /* revert to PIO for this request */
+}
+
+
+/* Teardown mappings after DMA has completed.  */
+static void
+ep93xx_ide_destroy_dmatable (ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	struct scatterlist *sg;  
+	
+	sg = hwif->sg_table;
+
+	if (hwif->sg_nents) {
+		UNMAP_SG(NULL, sg, hwif->sg_nents, hwif->sg_dma_direction);
+		//hwif->sg_dma_active = 0;
+	}
+}
+
+
+static int __ide_dma_lostirq (ide_drive_t *drive)
+{
+	DPRINTK("%s: DMA interrupt recovery\n", drive->name);
+	return 1;
+}
+
+// from PCI PC land
+/**
+ *	__ide_dma_on		-	Enable DMA on a device
+ *	@drive: drive to enable DMA on
+ *
+ *	Enable IDE DMA for a device on this IDE controller.
+ */
+ 
+int __ide_dma_on (ide_drive_t *drive)
+{
+        DPRINTK("%s\n", __FUNCTION__ );
+
+	drive->using_dma = 1;	
+	ide_toggle_bounce(drive, 1);
+
+	if (HWIF(drive)->ide_dma_host_on(drive))
+		return 1;
+
+	return 0;
+}
+
+
+/*				
+ * this is supposed to enable the host side (PC) host controller
+ * on the ep93xx it is already running, so nothing really happening here
+ *
+ */
+static int
+ep93xx_ide_dma_host_on(ide_drive_t *drive)
+{
+	DPRINTK("%s\n", __FUNCTION__ );
+
+	return 0;
+}
+
+static int
+ep93xx_ide_dma_host_off (ide_drive_t *drive)
+{
+	return 0;
+}
+
+/*****************************************************************************
+ *
+ *  ep93xx_rwproc()
+ *
+ *  Initializes the ep93xx IDE controller interface with the transfer type,
+ *  transfer mode, and transfer direction.
+ *
+ ****************************************************************************/
+static void
+ep93xx_rwproc(ide_drive_t *drive, int action)
+{
+	int speed;
+
+
+        DPRINTK("%s\n", __FUNCTION__ );
+
+	/*
+	 * Insure that neither device is selected. -wlg
+	 */
+	ep93xx_set_pio();
+
+
+	DPRINTK("rwproc in udma mode (udma starts at 64): %d\n", drive->current_speed);
+
+	/*
+	 * Configure the IDE controller for the specified transfer mode.
+	 */
+	switch (drive->current_speed)
+	{
+		/*
+		 * Configure for an MDMA operation.
+		 */
+		case XFER_MW_DMA_0:
+		case XFER_MW_DMA_1:
+		case XFER_MW_DMA_2:
+		printk("ep93xx ide dma: BAAAAADDD ! someone tries to use MDMA: not supported !!\n");
+		
+		break;
+
+		/*
+		 * Configure for a UDMA operation.
+		 */
+		case XFER_UDMA_0:
+		case XFER_UDMA_1:
+		case XFER_UDMA_2:
+		case XFER_UDMA_3:
+		case XFER_UDMA_4:
+		
+		    speed = drive->current_speed;
+		    speed -=64; //udma 0
+		    if(speed >= 3)
+			speed = 3; //max udma 3
+
+		    DPRINTK("rwproc in udma %d, action is %d\n", speed, action);
+		    outl( (speed << IDECfg_MODE_SHIFT) | IDECfg_UDMA | IDECfg_IDEEN, IDECFG );
+
+		    //action == 0 for read, action == 1 for write
+
+		    if(action)
+			action=0x2; //IDEUDMAOp_RWOP
+		    else
+			action=0;
+		        
+		    outl( action , IDEUDMAOP );    
+		    outl( action | IDEUDMAOp_UEN, IDEUDMAOP );
+		
+		break;
+
+		default:
+			break;
+	}
+}
+
+
+/*****************************************************************************
+ *
+ * ep93xx_ide_dma_begin()
+ *
+ * This function initiates a dma transfer.
+ *
+ ****************************************************************************/
+static void
+ep93xx_ide_dma_start(ide_drive_t *drive)
+{
+	int rv;
+	ide_hwif_t *hwif = HWIF(drive);
+	struct request *rq = HWGROUP(drive)->rq;
+
+
+	DPRINTK("%s\n", __FUNCTION__ );
+	
+	/*
+	 * Configure the ep93xx ide controller for a dma operation.
+	 */
+	if (rq_data_dir(rq) == READ)
+	    ep93xx_rwproc(drive, 0);
+	else
+	    ep93xx_rwproc(drive, 1);
+
+	/*
+	 * Start the dma transfer.
+	 */
+	rv=ep93xx_dma_start(hwif->hw.dma, 1, NULL);
+	DPRINTK("	starting dma on handle 0x%08x, rv=%d\n", (int)  hwif->hw.dma, rv );
+	DPRINTK(" 	DMAMM_0_CONTROL=0x%08x\n", inl(DMAMM_0_CONTROL) );
+	//return rv;
+}
+
+
+/*****************************************************************************
+ *
+ * ep93xx_ide_callback()
+ *
+ * Registered with the ep93xx dma driver and called at the end of the dma
+ * interrupt handler, this function should process the dma buffers.
+ *
+ ****************************************************************************/
+static void
+ep93xx_ide_callback(ep93xx_dma_int_t dma_int, ep93xx_dma_dev_t device,
+                    unsigned int user_data)
+{
+	ide_drive_t *drive = (ide_drive_t *)user_data;
+	ide_hwif_t *hwif = HWIF(drive);
+	unsigned int temp;
+	int rv;
+
+	DPRINTK("ep93xx_ide_callback %d\n", dma_int);
+	DPRINTK("	IDEUDMARdBufSts=0x%08x\n", inl(IDEUDMARFST) );
+
+#ifdef EP93XX_IDE_DMA_DEBUG
+
+    if( ep93xx_dma_is_done(hwif->hw.dma) == 1 )
+    {
+	printk("dma is done\n");
+    }
+    else
+    {
+	printk("dma is NOT DONE\n");
+    }
+
+    printk("DMAMM_0_SAR_CURRENT0  =0x%08x\n", inl(DMAMM_0_SAR_CURRENT0)   );
+    printk("DMAMM_0_DAR_CURRENT0  =0x%08x\n", inl(DMAMM_0_DAR_CURRENT0)   );
+
+#endif
+	/*
+	 * Retrieve from the dma interface as many used buffers as are
+	 * available.
+	 */
+	while (1)
+	{
+	    rv = ep93xx_dma_remove_buffer(hwif->hw.dma, &temp);
+	    if(rv<0)
+		break;
+	}
+	DPRINTK("buffers removed\n");
+
+    DPRINTK("	return from callback\n");
+}
+
+/*****************************************************************************
+ *
+ *  ep93xx_dma_timer_expiry()
+ *
+ *
+ *	dma_timer_expiry	-	handle a DMA timeout
+ *	@drive: Drive that timed out
+ *
+ *	An IDE DMA transfer timed out. In the event of an error we ask
+ *	the driver to resolve the problem, if a DMA transfer is still
+ *	in progress we continue to wait (arguably we need to add a
+ *	secondary 'I dont care what the drive thinks' timeout here)
+ *	Finally if we have an interrupt we let it complete the I/O.
+ *	But only one time - we clear expiry and if it's still not
+ *	completed after WAIT_CMD, we error and retry in PIO.
+ *	This can occur if an interrupt is lost or due to hang or bugs.
+ *
+ *
+ ****************************************************************************/
+static int
+ep93xx_idedma_timer_expiry(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	u8 dev_stat	 = hwif->INB(IDE_ALTSTATUS_REG);
+	u8 irq_stat	 = inl(IDECR) & IDECtrl_INTRQ;
+
+	DPRINTK(WARNING "%s: dma_timer_expiry: dev status == 0x%02x,irq= %d\n",
+		drive->name, dev_stat, irq_stat);
+
+	/*
+	 * Clear the expiry handler in case we decide to wait more,
+	 * next time timer expires it is an error
+	 */
+	HWGROUP(drive)->expiry = NULL;
+
+	/*
+	 * If the interrupt is asserted, call the handler.
+	 */
+	if (irq_stat)
+		HWGROUP(drive)->handler(drive);
+
+	/*
+	 * Check if the busy bit or the drq bit is set, indicating that
+	 * a dma transfer is still active, or the IDE interrupt is asserted.
+	 */
+	if ( (dev_stat & 0x80) || (dev_stat & 0x08) || irq_stat)
+		return WAIT_CMD;
+
+	/*
+	 * the device is not busy and the interrupt is not asserted, so check
+	 * if there's an error.
+	 */
+	if (dev_stat & 0x01)	/* ERROR */
+		return -1;
+
+	return 0;	/* Unknown status -- reset the bus */
+}
+
+/*****************************************************************************
+ *
+ * ep93xx_ide_dma_setup()
+ *
+ * This function sets up a dma read/write common operation.
+ *
+ ****************************************************************************/
+static void ep93xx_ide_dma_exec_cmd(ide_drive_t *drive, u8 cmd)
+{
+	/* issue cmd to drive */
+        ide_hwif_t *hwif = HWIF(drive);
+        struct request *rq = hwif->hwgroup->rq;
+        unsigned int dma_mode;
+
+	DPRINTK("ep93xx_ide_dma_exec_cmd\n");
+
+        if (rq_data_dir(rq) == READ)
+                dma_mode = DMA_FROM_DEVICE;
+        else
+                dma_mode = DMA_TO_DEVICE;
+	
+	/*
+	 * Enable PIO mode on the IDE interface.
+	 */
+	ep93xx_set_pio();
+	
+	/*
+	 * Send the  command to the device.
+	 */
+	if(dma_mode == DMA_FROM_DEVICE){
+		ide_execute_command(drive, cmd, /*&ep93xx_ide_dma_intr*/ide_dma_intr, 2*WAIT_CMD,
+			    &ep93xx_idedma_timer_expiry);
+	}
+	else{
+                ide_execute_command(drive, cmd, /*&ep93xx_ide_dma_intr*/ide_dma_intr, 4*WAIT_CMD,
+                            &ep93xx_idedma_timer_expiry);
+	}
+
+}
+
+/*****************************************************************************
+ *
+ * ep93xx_ide_dma_setup()
+ *
+ * This function sets up a dma read/write common operation.
+ *
+ ****************************************************************************/
+static int ep93xx_ide_dma_setup(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	struct request *rq = hwif->hwgroup->rq;
+	unsigned int dma_mode;
+
+	unsigned int flags;
+	unsigned int *table	= hwif->dmatable_cpu;
+
+	DPRINTK("ep93xx_ide_dma_setup\n");	
+	
+	if (rq_data_dir(rq) == READ)
+		dma_mode = DMA_FROM_DEVICE;
+	else
+		dma_mode = DMA_TO_DEVICE;
+
+	/*
+	 * Check if we are already transferring on this dma channel.
+	 */
+	if (/*hwif->sg_dma_active ||*/ drive->waiting_for_dma) {
+		DPRINTK("%s: dma_read: dma already active \n", drive->name);
+		return 1;
+	}
+
+
+	/*
+	 * Indicate that we're waiting for dma.
+	 */
+	drive->waiting_for_dma = 1;
+
+	if(dma_mode == DMA_FROM_DEVICE){
+	/*
+	 * Configure DMA M2M channel flags for a source address hold, h/w
+	 * initiated P2M transfer.
+	 */
+		flags = (SOURCE_HOLD | TRANSFER_MODE_HW_P2M);
+	}
+	else{
+	/*
+	 * Configure DMA M2M channel flags for a destination address
+	 * hold, h/w initiated M2P transfer.
+	 */
+		flags = (DESTINATION_HOLD | TRANSFER_MODE_HW_M2P);
+	}
+
+	if (drive->current_speed & 0x20) 
+	{
+	    printk("ep93xx_ide_dma_read: been asked to to MDMA: refusing categorically!!!\n");
+	} 
+	else 
+	{
+		if(dma_mode == DMA_FROM_DEVICE){
+			flags |= (WS_IDE_UDMA_READ << WAIT_STATES_SHIFT);
+		       /*
+		 	* UDMA data register address.
+		 	*/
+			hwif->dma_base = IDEUDMADATAIN - IO_BASE_VIRT + IO_BASE_PHYS;
+		}
+		else{
+			flags |= (WS_IDE_UDMA_WRITE << WAIT_STATES_SHIFT);
+
+			/*
+		 	* UDMA data register address.
+		 	*/
+			hwif->dma_base = IDEUDMADATAOUT - IO_BASE_VIRT + IO_BASE_PHYS;
+		}
+	}
+
+	/*
+	 * Configure the dma interface for this IDE operation.
+	 */
+	if (ep93xx_dma_config(hwif->hw.dma, 0, flags, ep93xx_ide_callback,
+			      (unsigned int)drive) != 0) {
+		DPRINTK("%s: ep93xx_ide_dma_read: ERROR- dma config failed",
+				drive->name);
+		drive->waiting_for_dma = 0;
+		/*
+		 * Fail.
+		 */
+		return 1;
+	}
+
+	/*
+	 * Build the table of dma-able buffers.
+	 */
+	if (!(g_prd_count=ep93xx_ide_build_dmatable(drive, rq)) ) 
+	{
+		DPRINTK("%s: ep93xx_ide_dma_read: ERROR- failed to build dma table",
+			drive->name);
+		drive->waiting_for_dma = 0;
+		/*
+		 * Fail, try PIO instead of DMA
+		 */
+		return 1;
+	}
+
+	DPRINTK("	%d dmas pending\n", g_prd_count);
+	/*
+	 * Indicate that the scatter gather is active.
+	 */
+	//hwif->sg_dma_active = 1;
+
+	/*
+	 * Prepare the dma interface with some buffers from the
+	 * dma_table.
+	 */
+	do {
+		DPRINTK("	add buf: handle=0x%08x, base=0x%08x, dest=0x%08x, len=0x%08x, g_prd_count=%d\n",
+			     hwif->hw.dma,
+			     hwif->dma_base,
+			     table[0],
+			     table[1],
+			     g_prd_count);
+
+	
+		/*
+		 * Add a buffer to the dma interface.
+		 */
+//		printk("rrd b=0x%08x, len=%d\n",  hwif->dmatable_cpu[0], (int) (hwif->dmatable_cpu[1] & 0x0fffffff) );
+		if(dma_mode == DMA_FROM_DEVICE){
+			if (ep93xx_dma_add_buffer(hwif->hw.dma, hwif->dma_base,
+					  table[0],
+					  table[1], 0,
+					  g_prd_count) != 0){
+				break;
+			}
+		}
+		else{
+			if (ep93xx_dma_add_buffer(hwif->hw.dma,
+					  table[0],
+					  hwif->dma_base,
+					  table[1], 0,
+					  g_pwr_count) != 0){
+		    		break;
+			}
+			
+		}
+		
+		
+		table += 2;
+
+		/*
+		 * Decrement the count of dmatable entries
+		 */
+		g_prd_count--;
+	} while (g_prd_count);
+
+	return 0;
+}
+
+
+/*****************************************************************************
+ *
+ *  ep93xx_set_pio()
+ *
+ *  Configures the ep93xx controller for a PIO mode transfer.
+ *
+ ****************************************************************************/
+static void
+ep93xx_set_pio(void)
+{
+	DPRINTK("ep93xx_set_pio\n");
+
+	/*
+	 * Insure that neither device is selected -wlg
+	 */
+        outl(inl(IDECR) | (IDECtrl_CS0n | IDECtrl_CS1n), IDECR);
+	/*
+	 * Clear the MDMA and UDMA operation registers.
+	 */
+	outl(0, IDEMDMAOP);
+	outl(0, IDEUDMAOP);
+
+	/*
+	 * Enable PIO mode of operation.
+	 */
+	outl(IDECfg_PIO | IDECfg_IDEEN | (4 << IDECfg_MODE_SHIFT) |
+	     (1 << IDECfg_WST_SHIFT), IDECFG);
+}
+
+
+static int
+ep93xx_ide_dma_end(ide_drive_t *drive)
+{
+	ide_hwif_t * hwif = HWIF(drive);
+	int rv;
+	int i;
+	
+	rv = 0;
+
+	DPRINTK("%s\n", __FUNCTION__ );
+	//mdelay(10);
+
+	while(1)
+	{
+	/*
+	 * See if there is any data left in UDMA FIFOs.  For a read, first wait
+	 * until either the DMA is done or the FIFO is empty.  If there is any
+	 * residual data in the FIFO, there was an error in the transfer.
+	 */
+	    i = inl(IDEUDMARFST);
+	    if( ep93xx_dma_is_done(hwif->hw.dma) )
+		break;
+	    if ( (i & 15) == ((i >> 4) & 15) )
+		break;
+	    udelay(1);
+	}
+	udelay(10);
+
+	/*
+	 * Put the dma interface into pause mode.
+	 */
+	ep93xx_dma_pause(hwif->hw.dma, 1, 0);
+	ep93xx_dma_flush(hwif->hw.dma);
+
+	/*
+	 * Enable PIO mode on the IDE interface.
+	 */
+	ep93xx_set_pio();
+
+	/*
+	 * Indicate there's no dma transfer currently in progress.
+	 */
+	//hwif->sg_dma_active = 0;
+	drive->waiting_for_dma = 0;
+
+	DPRINTK("IDEUDMARdBufSts=0x%08x\n", inl(IDEUDMARFST) );
+
+	if ( (i & 15) != ((i >> 4) & 15) )
+	{
+	    printk("dma_end: udma fifo ptr mismatch !\n");
+	    rv=-1;
+	    goto end;
+	}
+
+	if( ep93xx_dma_is_done(hwif->hw.dma) != 1)
+	{
+	    printk("dma_end: dma not done !\n");
+	    rv=-1;
+	    goto end;
+	}
+//this doesn't really do anthing right now, but might be necessary in the future
+	ep93xx_ide_destroy_dmatable(drive); 
+//negative value if DMA engine failed	
+end:
+	return rv;
+}
+
+
+//from PCi PC land
+/**
+ *	__ide_dma_host_off_quietly	-	Generic DMA kill
+ *	@drive: drive to control
+ *
+ *	Turn off the current DMA on this IDE controller. 
+ */
+
+static int ep93xx_ide_dma_off_quietly (ide_drive_t *drive)
+{
+        DPRINTK("%s\n", __FUNCTION__ );
+
+	drive->using_dma = 0;
+	ide_toggle_bounce(drive, 0);
+
+	if (HWIF(drive)->ide_dma_host_off(drive))
+		return 1;
+
+	return 0;
+}
+
+
+/*****************************************************************************
+ *
+ * ep93xx_ide_dma_bad_timeout()
+ *
+ ****************************************************************************/
+static int
+ep93xx_ide_dma_timeout(ide_drive_t *drive)
+{
+	DPRINTK("%s: ep93xx_ide_dma_timeout\n", drive->name);
+
+	printk("	IDEUDMARdBufSts=0x%08x\n", inl(IDEUDMARFST) );
+	printk("	DMAMM_0_SAR_CURRENT0  =0x%08x\n", inl(DMAMM_0_SAR_CURRENT0)   );
+	printk("	DMAMM_0_DAR_CURRENT0  =0x%08x\n", inl(DMAMM_0_DAR_CURRENT0)   );
+
+	if (HWIF(drive)->ide_dma_test_irq(drive))
+		return 0;
+
+	return HWIF(drive)->ide_dma_end(drive);
+}
+
+/*****************************************************************************
+ *
+ * ep93xx_ide_dma_test_irq()
+ *
+ * This function checks if the IDE interrupt is asserted and returns a
+ * 1 if it is, and 0 otherwise..
+ *
+ ****************************************************************************/
+static int
+ep93xx_ide_dma_test_irq(ide_drive_t *drive)
+{
+	DPRINTK("%s: ep93xx_ide_dma_test_irq\n", drive->name);
+
+	if (!drive->waiting_for_dma)
+		printk(KERN_WARNING "%s: %s called while not waiting\n",
+		       drive->name, __FUNCTION__);
+	/*
+	 * Return the value of the IDE interrupt bit.
+	 */
+	if( inl(IDECR) & IDECtrl_INTRQ )
+	    return 1;
+	    
+	return 0;
+}
+
+/*
+static int
+ep93xx_ide_dma_verbose(ide_drive_t *drive)
+{
+        DPRINTK("%s\n", __FUNCTION__ );
+	return 1;
+}
+*/
+
+void ep93xx_dma_init(ide_hwif_t *hwif)
+{
+    int dma_handle;
+    u32 uiTemp;
+    unsigned long flags;
+    
+    DPRINTK("%s\n", __FUNCTION__ );
+
+        local_irq_save(flags);
+        
+    	if( ep93xx_ide_allocate_dma_engine(hwif) )
+	    return;
+
+
+	/*
+	 * Init the ep93xx dma handle to 0.  This field is used to hold a
+	 * handle to the dma instance.
+	 */
+	hwif->hw.dma = 0; 
+
+	/*
+	 * Make sure the GPIO on IDE bits in the DEVCFG register are not set.
+	 */
+	uiTemp = inl(/*SYSCON_DEVCFG*/EP93XX_SYSCON_DEVICE_CONFIG) & ~(SYSCON_DEVCFG_EonIDE |
+					SYSCON_DEVCFG_GonIDE |
+					SYSCON_DEVCFG_HonIDE);
+	SysconSetLocked( /*SYSCON_DEVCFG*/EP93XX_SYSCON_DEVICE_CONFIG, uiTemp );
+	/*printk("inl(SYSCON_DEVCFG)=%x\n",inl(EP93XX_SYSCON_DEVICE_CONFIG));*/
+
+	/*
+	 * Insure that neither device is selected. -wlg
+	 */
+        outl(inl(IDECR) | (IDECtrl_CS0n | IDECtrl_CS1n), IDECR);
+
+	/*
+        * Clear the MDMA and UDMA operation registers.
+        */
+	outl(0, IDEMDMAOP);
+	outl(0, IDEUDMAOP);
+
+	/*
+        * Reset the UDMA state machine.
+        */
+	outl(IDEUDMADebug_RWOE | IDEUDMADebug_RWPTR | IDEUDMADebug_RWDR | IDEUDMADebug_RROE | IDEUDMADebug_RRPTR | IDEUDMADebug_RRDR,
+	     IDEUDMADEBUG);
+	outl(0, IDEUDMADEBUG);
+
+	/*
+	 * Set up the IDE interface for PIO transfers, using the default PIO
+	 * mode.
+	 */
+	outl(IDECfg_IDEEN | IDECfg_PIO | (4 << IDECfg_MODE_SHIFT) |
+	     (1 << IDECfg_WST_SHIFT), IDECFG);
+
+	/*
+	 * Setup the ports.
+	 */
+	ide_init_hwif_ports(&hwif->hw, 0x800, 0x406, NULL);
+
+	
+            
+        /*
+	 * Get the interrupt.
+	 */
+	hwif->hw.irq = IRQ_EIDE;
+
+	/*
+	 * This is the dma channel number assigned to this IDE interface. Until
+	 * dma is enabled for this interface, we set it to NO_DMA.
+	 */
+	hwif->hw.dma = NO_DMA;
+ 
+ 	/*
+	 * Open an instance of the ep93xx dma interface.
+	 */
+
+	if ( ep93xx_dma_request(&dma_handle, hwif->name, DMA_IDE) != 0 ) 
+	{
+			/*
+			 * Fail, so clean up.
+			 */
+			 
+	    ep93xx_ide_release_dma_engine (hwif);
+	    return;
+	}
+
+	/*
+	 * Now that we've got a dma channel allocated, set up the rest
+	 * of the dma specific stuff.
+	 */
+	DPRINTK("\n ide init- dma channel allocated: 0x%x, %s  %d \n", dma_handle, hwif->name, DMA_IDE);
+
+	hwif->hw.dma = dma_handle;
+	/*
+	 * Enable dma support for atapi devices.
+	 */
+
+	hwif->atapi_dma			= 1;
+	hwif->ultra_mask		= 0x0f;  
+	hwif->mwdma_mask		= 0x00;
+	hwif->swdma_mask		= 0x00;
+	hwif->speedproc			= NULL;
+	hwif->autodma			= 1;
+
+	g_prd_count=0;
+  
+     	hwif->ide_dma_on 		= __ide_dma_on;
+	hwif->ide_dma_lostirq 		= __ide_dma_lostirq;
+	hwif->ide_dma_check 		= ep93xx_ide_dma_check;
+	hwif->ide_dma_host_on 		= ep93xx_ide_dma_host_on;
+
+	hwif->ide_dma_host_off 		= ep93xx_ide_dma_host_off;
+
+	//hwif->ide_dma_begin 		= ep93xx_ide_dma_begin;
+	//hwif->ide_dma_read 		= ep93xx_ide_dma_read;
+	//hwif->ide_dma_write 		= ep93xx_ide_dma_write;
+	hwif->dma_setup			= ep93xx_ide_dma_setup;
+	hwif->dma_exec_cmd		= ep93xx_ide_dma_exec_cmd;
+	hwif->dma_start			= ep93xx_ide_dma_start;
+	
+	hwif->ide_dma_end 		= ep93xx_ide_dma_end;
+	hwif->ide_dma_off_quietly 	= ep93xx_ide_dma_off_quietly;
+	hwif->ide_dma_timeout 		= ep93xx_ide_dma_timeout;
+	hwif->ide_dma_test_irq 		= ep93xx_ide_dma_test_irq;
+	//hwif->ide_dma_verbose 		= ep93xx_ide_dma_verbose;
+	
+        local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(ep93xx_dma_init);
diff -burN linux-2.6.20.4/drivers/ide/arm/ide-ep93xx.c linux/drivers/ide/arm/ide-ep93xx.c
--- linux-2.6.20.4/drivers/ide/arm/ide-ep93xx.c	1970-01-01 08:00:00.000000000 +0800
+++ linux/drivers/ide/arm/ide-ep93xx.c	2007-04-09 16:18:58.000000000 +0800
@@ -0,0 +1,307 @@
+/******************************************************************************
+ * drivers/ide/arm/ide-ep93xx.c
+ *
+ * Support for IDE PIO
+ * Version 1.0 for EP93XX-E1
+ *
+ * Copyright (C) 2005  Cirrus Logic
+ *
+ * A large portion of this file is based on the ide-io.c
+ * and the respective pmac version of it
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ ****************************************************************************/
+#include <linux/autoconf.h>
+#include <linux/ide.h>
+#include <linux/delay.h>
+#include <linux/proc_fs.h>
+#include <asm/io.h>
+#include <asm/ide.h>
+#include <asm/irq.h>
+#include <asm/arch/ide.h>
+#include <asm/arch/dma.h>
+#include <asm/hardware.h>
+
+extern void ep93xx_dma_init(ide_hwif_t *hwif);
+
+/*****************************************************************************
+ *
+ *  functions to set up the IDE control register and data register to read
+ *  or write a byte of data to/from the specified IDE device register.
+ *
+ ****************************************************************************/
+static void
+ep93xx_ide_outb(u8 b, unsigned long addr)
+{
+	unsigned int uiIDECR;
+	
+	/*
+	 * Write the address out.
+	 */
+	uiIDECR = IDECtrl_DIORn | IDECtrl_DIOWn | ((addr & 7) << 2) |
+		  (addr >> 10);
+	outl(uiIDECR, IDECR);
+
+	/*
+	 * Write the data out.
+	 */
+	outl(b, IDEDATAOUT);
+
+	/*
+	 * Toggle the write signal.
+	 */
+	outl(uiIDECR & ~IDECtrl_DIOWn, IDECR);
+
+	outl(uiIDECR, IDECR);
+}
+
+static void
+ep93xx_ide_outbsync(ide_drive_t *drive, u8 b, unsigned long addr)
+{
+	unsigned int uiIDECR;
+	/*
+	 * Write the address out.
+	 */
+	uiIDECR = IDECtrl_DIORn | IDECtrl_DIOWn | ((addr & 7) << 2) |
+		  (addr >> 10);
+	outl(uiIDECR, IDECR);
+
+	/*
+	 * Write the data out.p
+	 */
+	outl(b, IDEDATAOUT);
+	/*
+	 * Toggle the write signal.
+	 */
+	outl(uiIDECR & ~IDECtrl_DIOWn, IDECR);
+	outl(uiIDECR, IDECR);
+}
+
+static unsigned char
+ep93xx_ide_inb(unsigned long addr)
+{
+	unsigned int uiIDECR;
+
+	/*
+	 * Write the address out.
+	 */
+	uiIDECR = IDECtrl_DIORn | IDECtrl_DIOWn | ((addr & 7) << 2) |
+		  (addr >> 10);
+	outl(uiIDECR, IDECR);
+
+	/*
+	 * Toggle the read signal.
+	 */
+	outl(uiIDECR & ~IDECtrl_DIORn, IDECR);
+	outl(uiIDECR, IDECR);
+
+	/*
+	 * Read the data in.
+	 */
+	return(inl(IDEDATAIN) & 0xff);
+}
+
+/*****************************************************************************
+ *
+ *  functions to set up the IDE control register and data restister to read
+ *  or write 16 bits of data to/from the specified IDE device register.
+ *  These functions should only be used when reading/writing data to/from
+ *  the data register.
+ *
+ ****************************************************************************/
+static void
+ep93xx_ide_outw(u16 w, unsigned long addr)
+{
+	unsigned int uiIDECR;
+
+	/*
+	 * Write the address out.
+	 */
+	uiIDECR = IDECtrl_DIORn | IDECtrl_DIOWn | ((addr & 7) << 2) |
+		  (addr >> 10);
+	outl(uiIDECR, IDECR);
+
+	/*
+	 * Write the data out.
+	 */
+	outl(w, IDEDATAOUT);
+
+	/*
+	 * Toggle the write signal.
+	 */
+	outl(uiIDECR & ~IDECtrl_DIOWn, IDECR);	
+	outl(uiIDECR, IDECR);
+}
+
+static u16
+ep93xx_ide_inw(unsigned long addr)
+{
+	unsigned int uiIDECR;
+
+	/*
+	 * Write the address out.
+	 */
+	uiIDECR = IDECtrl_DIORn | IDECtrl_DIOWn | ((addr & 7) << 2) |
+		  (addr >> 10);
+	outl(uiIDECR, IDECR);
+
+	/*
+	 * Toggle the read signal.
+	 */
+	outl(uiIDECR & ~IDECtrl_DIORn, IDECR);
+	outl(uiIDECR, IDECR);
+
+	/*
+	 * Read the data in.
+	 */
+	return(inl(IDEDATAIN) & 0xffff);
+}
+
+/*****************************************************************************
+ *
+ *  functions to read/write a block of data to/from the ide device using
+ *  PIO mode.
+ *
+ ****************************************************************************/
+static void
+ep93xx_ide_insw(unsigned long addr, void *buf, u32 count)
+{
+	unsigned short *data = (unsigned short *)buf;
+
+	/*
+	 * Read in data from the data register 16 bits at a time.
+	 */
+	for (; count; count--)
+		*data++ = ep93xx_ide_inw(addr);
+}
+
+static void
+ep93xx_ide_outsw(unsigned long addr, void *buf, u32 count)
+{
+	unsigned short *data = (unsigned short *)buf;
+
+	/*
+	 * Write out data to the data register 16 bits at a time.
+	 */
+	for (; count; count--)
+		ep93xx_ide_outw(*data++, addr);
+}
+
+static void
+ep93xx_ata_input_data(ide_drive_t *drive, void *buffer, u32 count)
+{
+	/*
+	 * Read in the specified number of half words from the ide interface.
+	 */
+	ep93xx_ide_insw(IDE_DATA_REG, buffer, count << 1);
+}
+
+static void
+ep93xx_ata_output_data(ide_drive_t *drive, void *buffer, u32 count)
+{
+	/*
+	 * write the specified number of half words from the ide interface
+	 * to the ide device.
+	 */
+	ep93xx_ide_outsw(IDE_DATA_REG, buffer, count << 1);
+}
+
+static void
+ep93xx_atapi_input_bytes(ide_drive_t *drive, void *buffer, u32 count)
+{
+	/*
+	 * read in the specified number of bytes from the ide interface.
+	 */
+	ep93xx_ide_insw(IDE_DATA_REG, buffer, (count >> 1) + (count & 1));
+}
+
+static void
+ep93xx_atapi_output_bytes(ide_drive_t *drive, void *buffer, u32 count)
+{
+	/*
+	 * Write the specified number of bytes from the ide interface
+	 * to the ide device.
+	 */
+	ep93xx_ide_outsw(IDE_DATA_REG, buffer, (count >> 1) + (count & 1));
+}
+
+
+
+
+void
+ep93xx_ide_init(struct hwif_s *hwif)
+{
+      
+    u32 uiTemp;         
+	      
+	/*
+	 * Make sure the GPIO on IDE bits in the DEVCFG register are not set.
+	 */
+	uiTemp = inl(EP93XX_SYSCON_DEVICE_CONFIG) & ~(SYSCON_DEVCFG_EonIDE |
+					SYSCON_DEVCFG_GonIDE |
+					SYSCON_DEVCFG_HonIDE);
+	SysconSetLocked( EP93XX_SYSCON_DEVICE_CONFIG, uiTemp );
+
+	/*
+	 * Insure that neither device is selected. -wlg
+	 */
+        outl(inl(IDECR) | (IDECtrl_CS0n | IDECtrl_CS1n), IDECR);
+
+	/*
+	 * Make sure that MWDMA and UDMA are disabled.
+	 */
+	outl(0, IDEMDMAOP);
+	outl(0, IDEUDMAOP);
+
+	/*
+	 * Set up the IDE interface for PIO transfers, using the default PIO
+	 * mode.
+	 */
+	outl(IDECfg_IDEEN | IDECfg_PIO | (4 << IDECfg_MODE_SHIFT) |
+	     (1 << IDECfg_WST_SHIFT), IDECFG);
+
+	/*
+	 * Setup the ports.
+	 */
+	ide_init_hwif_ports(&(hwif->hw), 0x800, 0x406, NULL);
+	      
+	/*
+	 *  Set up the HW interface function pointers with the ep93xx specific
+	 *  function.
+	 */
+	hwif->ata_input_data = ep93xx_ata_input_data;
+	hwif->ata_output_data = ep93xx_ata_output_data;
+	hwif->atapi_input_bytes = ep93xx_atapi_input_bytes;
+	hwif->atapi_output_bytes = ep93xx_atapi_output_bytes;
+
+	hwif->OUTB = ep93xx_ide_outb;
+	hwif->OUTBSYNC = ep93xx_ide_outbsync;
+	hwif->OUTW = ep93xx_ide_outw;
+	hwif->OUTSW = ep93xx_ide_outsw;
+
+	hwif->INB = ep93xx_ide_inb;
+	hwif->INW = ep93xx_ide_inw;
+	hwif->INSW = ep93xx_ide_insw;
+
+#ifdef CONFIG_BLK_DEV_IDE_DMA_EP93XX
+	ep93xx_dma_init(hwif);
+#endif
+
+}
+
+
+
diff -burN linux-2.6.20.4/drivers/ide/arm/Makefile linux/drivers/ide/arm/Makefile
--- linux-2.6.20.4/drivers/ide/arm/Makefile	2007-04-24 10:43:19.000000000 +0800
+++ linux/drivers/ide/arm/Makefile	2007-03-28 11:11:55.000000000 +0800
@@ -2,5 +2,7 @@
 obj-$(CONFIG_BLK_DEV_IDE_ICSIDE)	+= icside.o
 obj-$(CONFIG_BLK_DEV_IDE_RAPIDE)	+= rapide.o
 obj-$(CONFIG_BLK_DEV_IDE_BAST)		+= bast-ide.o
+obj-$(CONFIG_BLK_DEV_IDE_EP93XX)        += ide-ep93xx.o
+obj-$(CONFIG_BLK_DEV_IDE_DMA_EP93XX)    += ide-dma-ep93xx.o
 
 EXTRA_CFLAGS	:= -Idrivers/ide
diff -burN linux-2.6.20.4/drivers/ide/ide-iops.c linux/drivers/ide/ide-iops.c
--- linux-2.6.20.4/drivers/ide/ide-iops.c	2007-04-24 10:43:19.000000000 +0800
+++ linux/drivers/ide/ide-iops.c	2007-03-30 10:22:23.000000000 +0800
@@ -33,20 +33,35 @@
 /*
  *	Conventional PIO operations for ATA devices
  */
-
 static u8 ide_inb (unsigned long port)
 {
+#if defined( CONFIG_ARCH_EDB7312 )
+        return IN_BYTE(port);
+#elif defined( CONFIG_ARCH_EP93XX )
+        return (u8) ep93xx_pcmcia_io_inb(port);
+#else
 	return (u8) inb(port);
+#endif
+
 }
 
 static u16 ide_inw (unsigned long port)
 {
+#ifdef CONFIG_ARCH_EP93XX
+        return (u16) ep93xx_pcmcia_io_inw(port);
+#else
 	return (u16) inw(port);
+#endif
+
 }
 
 static void ide_insw (unsigned long port, void *addr, u32 count)
 {
+#ifdef CONFIG_ARCH_EP93XX
+        return ep93xx_pcmcia_io_insw(port, addr, count);
+#else
 	insw(port, addr, count);
+#endif
 }
 
 static u32 ide_inl (unsigned long port)
@@ -61,22 +76,41 @@
 
 static void ide_outb (u8 val, unsigned long port)
 {
+#if defined( CONFIG_ARCH_EDB7312 )
+        OUT_BYTE(val, port);
+#elif defined( CONFIG_ARCH_EP93XX )
+        ep93xx_pcmcia_io_outb(val, port);
+#else
 	outb(val, port);
+#endif
 }
 
 static void ide_outbsync (ide_drive_t *drive, u8 addr, unsigned long port)
 {
+#ifdef CONFIG_ARCH_EP93XX
+        ep93xx_pcmcia_io_outb(addr, port);
+#else
 	outb(addr, port);
+#endif
+
 }
 
 static void ide_outw (u16 val, unsigned long port)
 {
+#ifdef CONFIG_ARCH_EP93XX
+        ep93xx_pcmcia_io_outw(val, port);
+#else
 	outw(val, port);
+#endif
 }
-
 static void ide_outsw (unsigned long port, void *addr, u32 count)
 {
+#ifdef CONFIG_ARCH_EP93XX
+        ep93xx_pcmcia_io_outsw(port, addr, count);
+#else
 	outsw(port, addr, count);
+#endif
+
 }
 
 static void ide_outl (u32 val, unsigned long port)
diff -burN linux-2.6.20.4/drivers/ide/Kconfig linux/drivers/ide/Kconfig
--- linux-2.6.20.4/drivers/ide/Kconfig	2007-04-24 10:43:19.000000000 +0800
+++ linux/drivers/ide/Kconfig	2007-03-28 11:47:53.000000000 +0800
@@ -324,6 +324,18 @@
 	  would like the kernel to automatically detect and activate
 	  it, say Y here.
 
+config BLK_DEV_IDE_EP93XX
+	bool "EP93xx support"
+	depends on (MACH_EDB9312 || MACH_EDB9315 || MACH_EDB9315A )
+	help
+	  If you want IDE support for EP9312&EP9315&EP9315A, say Y here.
+
+config BLK_DEV_IDE_DMA_EP93XX
+	bool "EP93xx IDE DMA support"
+	depends on (MACH_EDB9312 || MACH_EDB9315 || MACH_EDB9315A )
+	help
+	  If you want IDE DMA support for your EP9312&EP9315&EP9315A, say Y here.
+
 config BLK_DEV_IDEPCI
 	bool "PCI IDE chipset support" if PCI
 	default BLK_DEV_IDEDMA_PMAC if PPC_PMAC && BLK_DEV_IDEDMA_PMAC
@@ -799,7 +811,7 @@
        depends on BLK_DEV_IDE_AU1XXX
 
 config IDE_ARM
-	def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
+	def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK || MACH_EDB9312 || MACH_EDB9315 || MACH_EDB9315A)
 
 config BLK_DEV_IDE_ICSIDE
 	tristate "ICS IDE interface support"
@@ -1033,7 +1045,8 @@
 endif
 
 config BLK_DEV_IDEDMA
-	def_bool BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+	def_bool BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA || BLK_DEV_IDE_DMA_EP93XX
+
 
 config IDEDMA_IVB
 	bool "IGNORE word93 Validation BITS"
diff -burN linux-2.6.20.4/drivers/input/keyboard/ep93xx_keypad.c linux/drivers/input/keyboard/ep93xx_keypad.c
--- linux-2.6.20.4/drivers/input/keyboard/ep93xx_keypad.c	1970-01-01 08:00:00.000000000 +0800
+++ linux/drivers/input/keyboard/ep93xx_keypad.c	2007-03-30 10:29:38.000000000 +0800
@@ -0,0 +1,428 @@
+/******************************************************************************
+ * 
+ *  File:   linux/drivers/input/keyboard/ep93xx_keypad.c
+ *
+ *  Purpose:    Support for 8x8 keypad (With Scroll Wheel) for a Cirrus Logic EP93xx
+ *
+ *  History:    
+ *              For Sirius (Internet Radio) Project.
+ *
+ * Copyright 2006 Cirrus Logic Inc.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *   
+ ******************************************************************************/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/poll.h>
+#include <linux/miscdevice.h>
+#include <linux/init.h>
+#include <linux/compiler.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/syscalls.h>
+#include <linux/input.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include "ep93xx_keypad.h"
+
+static struct ep93xx_keypad_dev dev;
+static char *name = "Cirrus EP93xx 8x8 keypad driver";
+
+static void handle_scancode(struct ep93xx_keypad_dev* pdev, unsigned char scancode, int down)
+{   
+#ifdef FIX_FOR_EC12E2424404
+    int i, wheel1_count=0, wheel2_count=0;
+    if(down && ((scancode == KEY_WHEEL_1) || (scancode == KEY_WHEEL_2)) )
+    {
+        pdev->wheelkey_count &= 0x03;
+        pdev->wheelkey_buffer[pdev->wheelkey_count] = scancode;
+        pdev->wheelkey_count ++;
+
+        if(pdev->wheelkey_hit)
+        {
+            for(i=0;i<=pdev->wheelkey_count;i++)
+            {
+                if(pdev->wheelkey_buffer[i]==KEY_WHEEL_1) wheel1_count++;
+                if(pdev->wheelkey_buffer[i]==KEY_WHEEL_2) wheel2_count++;
+            }
+            if(wheel1_count >=3)
+            {
+                input_report_key((struct input_dev*)dev.input, KEY_WHEEL_1, 1);
+                input_report_key((struct input_dev*)dev.input, KEY_WHEEL_1, 0);
+                input_sync((struct input_dev*)dev.input);
+            }
+            else if(wheel2_count >=3)
+            {
+                input_report_key((struct input_dev*)dev.input, KEY_WHEEL_2, 1);
+                input_report_key((struct input_dev*)dev.input, KEY_WHEEL_2, 0);
+                input_sync((struct input_dev*)dev.input);
+            }
+            pdev->wheelkey_hit = 0;
+            pdev->wheelkey_count = 0;
+        }
+    }
+    else
+#endif
+    if(scancode > 0)
+    {
+        input_report_key((struct input_dev*)dev.input, scancode, down);
+        input_sync((struct input_dev*)dev.input);
+    }
+}
+
+static irqreturn_t ep93xx_keypad_isr(int irq, void *dev_id)
+{
+    int nkey1,nkey2;
+#ifdef SCROLL_WHEEL_KEY_SUPPORT
+    int phase,step;
+#endif
+    unsigned long status;
+    struct ep93xx_keypad_dev* pdev = (struct ep93xx_keypad_dev*)dev_id;
+    
+    status = inl(KEY_REG);
+    
+    status &= 0x3fff;
+
+/*  printk("status = %08x\n", (int)status);
+    printk("%d\n",wheel_phase_table[pdev->wheelkey]);
+*/
+#ifdef SCROLL_WHEEL_KEY_SUPPORT
+    phase = wheel_phase_table[pdev->wheelkey&0x3];
+#endif
+
+    if(status & KEYREG_KEY2)
+    {
+        nkey1 = KeyPadTable[ (status & KEYREG_KEY1_MASK)>>KEYREG_KEY1_SHIFT ];
+        nkey2 = KeyPadTable[ (status & KEYREG_KEY2_MASK)>>KEYREG_KEY2_SHIFT ];
+#ifdef SCROLL_WHEEL_KEY_SUPPORT
+        if( (nkey1 == KEY_WHEEL_1) || (nkey2 == KEY_WHEEL_1) )
+        {
+            pdev->wheelkey |= WHEEL_FLAG1;
+        }
+        if( (nkey1 == KEY_WHEEL_2) || (nkey2 == KEY_WHEEL_2) )
+        {
+            pdev->wheelkey |= WHEEL_FLAG2;
+        }
+        if(pdev->last_key1 >0 || pdev->last_key2 >0)
+        {
+            if((pdev->last_key1 > 0) && (nkey1 != pdev->last_key1) && (nkey2 != pdev->last_key1) )
+            {
+                handle_scancode(pdev, pdev->last_key1, 0);
+                pdev->last_key1 = 0;
+            }
+            if((pdev->last_key2 > 0) && (nkey1 != pdev->last_key2) && (nkey2 != pdev->last_key2) )
+            {
+                handle_scancode(pdev, pdev->last_key2, 0);
+                pdev->last_key2 = 0;
+            }
+        }
+
+        if( (nkey1 != KEY_WHEEL_1) && (nkey1 != KEY_WHEEL_2) )
+        {
+            if( (nkey1 != pdev->last_key1) && (nkey1 != pdev->last_key2) )
+            {
+                handle_scancode(pdev, nkey1, 1);
+                pdev->last_key1 = nkey1;
+            }
+        }
+
+        if( (nkey2 != KEY_WHEEL_1) && (nkey2 != KEY_WHEEL_2) )
+        {
+            if( (nkey2 != pdev->last_key1) && (nkey2 != pdev->last_key2) )
+            {
+                handle_scancode(pdev, nkey2, 1);
+                pdev->last_key2 = nkey2;
+            }
+        }
+#else
+        if(pdev->last_key1 >0 || pdev->last_key2 >0)
+        {
+            if((pdev->last_key1 > 0) && (nkey1 != pdev->last_key1) && (nkey2 != pdev->last_key1) )
+            {
+                handle_scancode(pdev, pdev->last_key1, 0);
+                pdev->last_key1 = 0;
+            }
+            if((pdev->last_key2 > 0) && (nkey1 != pdev->last_key2) && (nkey2 != pdev->last_key2) )
+            {
+                handle_scancode(pdev, pdev->last_key2, 0);
+                pdev->last_key2 = 0;
+            }
+        }
+
+        if( (nkey1 != pdev->last_key1) && (nkey1 != pdev->last_key2) )
+        {
+            handle_scancode(pdev, nkey1, 1);
+            pdev->last_key1 = nkey1;
+        }
+        if( (nkey2 != pdev->last_key1) && (nkey2 != pdev->last_key2) )
+        {
+            handle_scancode(pdev, nkey2, 1);
+            pdev->last_key2 = nkey2;
+        }
+#endif
+    }
+    else if(status & KEYREG_KEY1)
+    {
+        nkey1 = KeyPadTable[ (status & KEYREG_KEY1_MASK)>>KEYREG_KEY1_SHIFT ];
+#ifdef SCROLL_WHEEL_KEY_SUPPORT
+        if(nkey1 == KEY_WHEEL_1)
+        {
+            pdev->wheelkey |= WHEEL_FLAG1;
+            if(pdev->wheelkey & WHEEL_FLAG2)
+            {
+                pdev->wheelkey &= ~WHEEL_FLAG2;
+            }
+            if(pdev->last_key1 >0 || pdev->last_key2 >0)
+            {
+                if((pdev->last_key1 > 0) && (nkey1 != pdev->last_key1) )
+                {
+                    handle_scancode(pdev, pdev->last_key1, 0);
+                    pdev->last_key1 = 0;
+                }
+                if((pdev->last_key2 > 0) && (nkey1 != pdev->last_key2) )
+                {
+                    handle_scancode(pdev, pdev->last_key2, 0);
+                    pdev->last_key2 = 0;
+                }
+            }
+        }
+        else if(nkey1 == KEY_WHEEL_2)
+        {
+            pdev->wheelkey |= WHEEL_FLAG2;
+            if(pdev->wheelkey & WHEEL_FLAG1)
+            {
+                pdev->wheelkey &= ~WHEEL_FLAG1;
+            }
+            if(pdev->last_key1 >0 || pdev->last_key2 >0)
+            {
+                if((pdev->last_key1 > 0) && (nkey1 != pdev->last_key1) )
+                {
+                    handle_scancode(pdev, pdev->last_key1, 0);
+                    pdev->last_key1 = 0;
+                }
+                if((pdev->last_key2 > 0) && (nkey1 != pdev->last_key2) )
+                {
+                    handle_scancode(pdev, pdev->last_key2, 0);
+                    pdev->last_key2 = 0;
+                }
+            }
+        }
+        else
+        {
+            if(pdev->wheelkey & WHEEL_FLAG2)
+            {
+                pdev->wheelkey &= ~WHEEL_FLAG2;
+            }
+            if(pdev->wheelkey & WHEEL_FLAG1)
+            {
+                pdev->wheelkey &= ~WHEEL_FLAG1;
+            }
+            if(pdev->last_key1 >0 || pdev->last_key2 >0)
+            {
+                if((pdev->last_key1 > 0) && (nkey1 != pdev->last_key1) )
+                {
+                    handle_scancode(pdev, pdev->last_key1, 0);
+                    pdev->last_key1 = 0;
+                }
+                if((pdev->last_key2 > 0) && (nkey1 != pdev->last_key2) )
+                {
+                    handle_scancode(pdev, pdev->last_key2, 0);
+                    pdev->last_key2 = 0;
+                }
+            }
+            handle_scancode(pdev, nkey1, 1);
+            pdev->last_key1 = nkey1;
+        }
+#else
+        if(pdev->last_key1 >0 || pdev->last_key2 >0)
+        {
+            if((pdev->last_key1 > 0) && (nkey1 != pdev->last_key1) )
+            {
+                handle_scancode(pdev, pdev->last_key1, 0);
+                pdev->last_key1 = 0;
+            }
+            if((pdev->last_key2 > 0) && (nkey1 != pdev->last_key2) )
+            {
+                handle_scancode(pdev, pdev->last_key2, 0);
+                pdev->last_key2 = 0;
+            }
+        }
+        handle_scancode(pdev, nkey1, 1);
+        pdev->last_key1 = nkey1;
+#endif
+    }
+    else
+    {
+#ifdef SCROLL_WHEEL_KEY_SUPPORT
+        if(pdev->wheelkey & WHEEL_FLAG2)
+        {
+            pdev->wheelkey &= ~WHEEL_FLAG2;
+        }
+        if(pdev->wheelkey & WHEEL_FLAG1)
+        {
+            pdev->wheelkey &= ~WHEEL_FLAG1;
+        }
+#ifdef FIX_FOR_EC12E2424404
+        pdev->wheelkey_hit = 1;
+#endif
+
+#endif
+        if(pdev->last_key1)
+        {
+            handle_scancode(pdev, pdev->last_key1, 0);
+            pdev->last_key1 = 0;
+        }
+        if(pdev->last_key2)
+        {
+            handle_scancode(pdev, pdev->last_key2, 0);
+            pdev->last_key2 = 0;
+        }
+    }
+#ifdef SCROLL_WHEEL_KEY_SUPPORT
+    if(phase != wheel_phase_table[pdev->wheelkey&0x3])
+    {
+        step = ((wheel_phase_table[pdev->wheelkey&0x3] - phase + 4 ) % 4 );
+        if(step == 2)
+            step = pdev->last_wheel_step;
+        else
+            pdev->last_wheel_step = step;
+        
+        /*printk("step %d\n",step);*/
+        switch(step)
+        {
+        case 1:
+            handle_scancode(pdev, KEY_WHEEL_1, 1);
+            handle_scancode(pdev, KEY_WHEEL_1, 0);
+            break;
+        case 3:
+            handle_scancode(pdev, KEY_WHEEL_2, 1);
+            handle_scancode(pdev, KEY_WHEEL_2, 0);
+            break;
+        default:
+            break;
+        }
+    }
+#endif
+    return(IRQ_HANDLED);
+}
+ 
+unsigned long setprescale (unsigned short nScale)
+{
+    unsigned long nValue;
+
+    nValue = inl(SCANINIT);
+    nValue = ( nValue & (~SCANINIT_PRSCL_MASK) ) | (nScale & SCANINIT_PRSCL_MASK);
+    outl(nValue, SCANINIT);
+    return nValue;
+}
+
+unsigned long setdebounce (unsigned char nDebounce)
+{
+    unsigned long nValue;
+
+    nValue = inl(SCANINIT);
+    nValue = ( nValue & (~SCANINIT_DBNC_MASK) ) | ((nDebounce<<16) & SCANINIT_DBNC_MASK);
+    outl(nValue, SCANINIT);
+    return nValue;
+}
+
+void keypad_enable ( unsigned char bState )
+{
+    unsigned long nreg;
+    if( bState ) 
+    {
+        nreg = inl(SYSCON_KTDIV);
+        nreg |= SYSCON_KTDIV_KEN;
+        SysconSetLocked( SYSCON_KTDIV, nreg );    
+    }
+    else
+    {
+        nreg = inl(SYSCON_KTDIV);
+        nreg &= (~SYSCON_KTDIV_KEN);
+        SysconSetLocked( SYSCON_KTDIV, nreg );    
+    }
+    return;
+}
+
+//=============================================================================
+// ep93xx_keypad_init
+//=============================================================================
+int __init ep93xx_keypad_init(void)
+{
+    int i;
+    int retval;
+
+    printk("%s\n", name);
+
+    dev.input = input_allocate_device();
+    if(dev.input==0){
+    	printk("Allocate input device \n");
+        return -1;
+    }
+
+#ifdef SCROLL_WHEEL_KEY_SUPPORT
+    dev.wheelkey = 0;
+    dev.last_wheel_step = 0;
+#ifdef FIX_FOR_EC12E2424404
+    dev.wheelkey_count = 0;
+    dev.wheelkey_hit = 0;
+#endif
+
+#endif
+
+    dev.last_key1 = 0;
+    dev.last_key2 = 0;
+    dev.input->name = name;
+    dev.input->evbit[0] = BIT(EV_KEY);
+
+    for (i = 0; i < KeyPad_SIZE; i++)
+        set_bit(KeyPadTable[i], dev.input->keybit);
+
+#ifdef FIX_FOR_EC12E2424404
+    setdebounce(0xfe);
+    setprescale(0x8);
+#else
+    setdebounce(0xfe);
+    setprescale(0x80);
+#endif
+    retval = request_irq( IRQ_EP93XX_KEY, ep93xx_keypad_isr, SA_INTERRUPT, "ep93xx_keypad", (void*)&dev);
+    if( retval )
+    {
+        printk(KERN_WARNING "ep93xx_keypad: failed to get keypad IRQ\n");
+        return retval;
+    }
+    
+    input_register_device((struct input_dev*)dev.input);
+
+    keypad_enable(1);
+
+    return 0;
+}
+
+void __exit ep93xx_keypad_cleanup(void)
+{
+    input_unregister_device((struct input_dev*)dev.input);
+}
+
+module_init(ep93xx_keypad_init);
+module_exit(ep93xx_keypad_cleanup);
+MODULE_LICENSE("GPL");
diff -burN linux-2.6.20.4/drivers/input/keyboard/ep93xx_keypad.h linux/drivers/input/keyboard/ep93xx_keypad.h
--- linux-2.6.20.4/drivers/input/keyboard/ep93xx_keypad.h	1970-01-01 08:00:00.000000000 +0800
+++ linux/drivers/input/keyboard/ep93xx_keypad.h	2007-03-28 14:21:24.000000000 +0800
@@ -0,0 +1,95 @@
+/*
+ * ep93xx_keypad.h Keymap definitions
+ */
+
+#if defined(CONFIG_KEYBOARD_EP93XX_SCROLL_WHEEL)
+#define SCROLL_WHEEL_KEY_SUPPORT
+#endif
+
+#ifdef SCROLL_WHEEL_KEY_SUPPORT
+
+/*
+ *  Support for a scroll wheel key:
+ *      ALPS 12mm Size Insulated Shaft Type Encoder.
+ *  Part NO. :      EC12E2424404
+ *  Connect TO:     Col1/2-Row3
+ */
+#define FIX_FOR_EC12E2424404 1
+
+
+#define KEY_WHEEL_1      KEY_UP
+#define KEY_WHEEL_2      KEY_DOWN
+
+static int wheel_phase_table[16] = {1,0,2,3,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1};
+
+
+#endif
+
+
+//
+// This table is used to map the scan code to the Linux default keymap.
+//
+#define KeyPad_SIZE         (8*8)
+static unsigned int const KeyPadTable[KeyPad_SIZE] = 
+{
+/*             COL0        COL1        CLO2        COL3       COL4       COL5       COL6       COL7   */
+/*ROW0*/       KEY_ESC,    KEY_1 ,     KEY_2 ,     0,         0,         0,         0,         0, 
+/*ROW1*/       KEY_3 ,     KEY_4 ,     KEY_5 ,     0,         0,         0,         0,         0, 
+/*ROW2*/       KEY_6 ,     KEY_7 ,     KEY_ENTER,  0,         0,         0,         0,         0, 
+/*ROW3*/       0,          KEY_UP,     KEY_DOWN,   0,         0,         0,         0,         0, 
+/*ROW4*/       0,          0,          0,          0,         0,         0,         0,         0, 
+/*ROW5*/       0,          0,          0,          0,         0,         0,         0,         0, 
+/*ROW6*/       0,          0,          0,          0,         0,         0,         0,         0, 
+/*ROW7*/       0,          0,          0,          0,         0,         0,         0,         0
+};
+
+struct ep93xx_keypad_dev
+{
+    struct input_dev * input;
+
+#ifdef SCROLL_WHEEL_KEY_SUPPORT
+
+#define WHEEL_FLAG1   1
+#define WHEEL_FLAG2  2
+    int wheelkey;
+    int last_wheel_step;
+
+#ifdef FIX_FOR_EC12E2424404
+    int wheelkey_buffer[4];
+    int wheelkey_count;
+    int wheelkey_hit;
+#endif
+
+#endif
+
+    int last_key1;
+    int last_key2;
+
+};
+
+#define SCANINIT_PRSCL_MASK         0x000003FF
+#define SCANINIT_PRSCL_SHIFT        0L
+#define SCANINIT_T2                 0x00001000
+#define SCANINIT_BACK               0x00002000
+#define SCANINIT_DIAG               0x00004000
+#define SCANINIT_DIS3KY             0x00008000
+#define SCANINIT_DBNC_MASK          0x00FF0000
+#define SCANINIT_DBNC_SHIFT         16L
+
+#define KEYREG_KEY1_MASK            0x0000003F
+#define KEYREG_KEY1_SHIFT           0L
+#define KEYREG_KEY2_MASK            0x00000Fc0
+#define KEYREG_KEY2_SHIFT           6L
+#define KEYREG_KEY1ROW_MASK         0x00000007
+#define KEYREG_KEY1ROW_SHIFT        0L
+#define KEYREG_KEY1COL_MASK         0x00000038
+#define KEYREG_KEY1COL_SHIFT        3L
+#define KEYREG_KEY2ROW_MASK         0x000001c0
+#define KEYREG_KEY2ROW_SHIFT        6L
+#define KEYREG_KEY2COL_MASK         0x00000E00
+#define KEYREG_KEY2COL_SHIFT        9L
+
+#define KEYREG_KEY1                 0x00001000
+#define KEYREG_KEY2                 0x00002000
+#define KEYREG_INT                  0x00004000
+#define KEYREG_K                    0x00008000
diff -burN linux-2.6.20.4/drivers/input/keyboard/ep93xx_spi_kbd.c linux/drivers/input/keyboard/ep93xx_spi_kbd.c
--- linux-2.6.20.4/drivers/input/keyboard/ep93xx_spi_kbd.c	1970-01-01 08:00:00.000000000 +0800
+++ linux/drivers/input/keyboard/ep93xx_spi_kbd.c	2007-03-30 10:22:59.000000000 +0800
@@ -0,0 +1,426 @@
+/******************************************************************************
+ * 
+ *  File:	linux/drivers/char/ep93xx_spi_kbd.c
+ *
+ *  Purpose:	Support for SPI Keyboard for a Cirrus Logic EP93xx
+ *
+ *  History:	
+ *
+ *  Limitations:
+ *  Break and Print Screen keys not handled yet!
+ *
+ *
+ *  Copyright 2003 Cirrus Logic Inc.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *   
+ ******************************************************************************/
+
+/*
+ * FIXME: There are more parity problems than there ought to be.
+ * TODO: Track down
+ * WHERE: grep for "BAD_PARITY" 
+ * WORKAROUND: Do not press too many keys and do not type too fast
+ *             type key another time if it got lost 
+ *
+ * FIXME2: Keymap should be done properly
+ */
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/hardware.h>
+#include <asm/arch/ssp.h>
+
+#include "ep93xx_spi_kbd.h"
+
+#define EP93XX_MAX_KEY_DOWN_COUNT 6
+
+void DataCallback(unsigned int Data);
+static int g_SSP_Handle;
+static struct input_dev * ep93xxkbd_dev;
+static char *name = "Cirrus EP93xx PS/2 keyboard driver";
+
+//-----------------------------------------------------------------------------
+//  Debug stuff...
+//-----------------------------------------------------------------------------
+
+#undef UART_HACK_DEBUG
+//#define UART_HACK_DEBUG 1
+
+#if defined(UART_HACK_DEBUG) && defined(CONFIG_DEBUG_LL)
+char szBuf[256];
+#define DPRINTK( x... )   \
+	sprintf( szBuf, ##x ); \
+	printascii( szBuf );
+#else
+#define DPRINTK( x... )
+#endif
+
+typedef struct {
+	unsigned char scancode;
+	unsigned char count;
+} key_down_tracker_t;
+
+//
+// In the interest of efficiency, let's only allow 5 keys to be down
+// at a time, maximum.  So if anybody is having a temper tantrum on
+// their keyboard, they may get stuck keys, but that's to be expected.
+//
+
+#define MAX_KEYS_DOWN 8
+static key_down_tracker_t KeyTracker[MAX_KEYS_DOWN];
+
+static unsigned char SPI2KScan(unsigned int uiSPIValue, int *pValid);
+static void InitSniffer(void);
+static void KeySniffer(unsigned char scancode, int down);
+static void Check4StuckKeys(void);
+
+
+/* 
+ * wrapper: old style (2.4.x) to 2.6.x input subsystem 
+ */
+static void handle_scancode(unsigned char scancode, int down)
+{
+	DPRINTK("handle_scancode(scancode=%04X, down=%d); %02X ", scancode,
+		down, scancode & 0x7f);
+
+	if( scancode > KSCAN_TABLE_SIZE)
+		scancode &= ~EXTENDED_KEY;
+	
+	input_report_key(ep93xxkbd_dev, KScanCodeToVKeyTable[scancode], down);
+
+	input_sync(ep93xxkbd_dev);
+
+	DPRINTK("(virtual) scancode=%02X\n", scancode);
+}
+
+//=============================================================================
+// InitSniffer
+//=============================================================================
+static void InitSniffer(void)
+{
+	int i;
+
+	//
+	// Clear our struct to indicate that no keys are down now.
+	// If somebody boots this thing while holding down keys, then they'll
+	// get what they deserve.
+	//
+	for (i = 0; i < MAX_KEYS_DOWN; i++) {
+		KeyTracker[i].count = 0;
+		KeyTracker[i].scancode = 0;
+	}
+}
+
+//=============================================================================
+// KeySniffer
+//=============================================================================
+// To prevent stuck keys, keep track of what keys are down.  This information
+// is used by Check4StuckKeys().
+//=============================================================================
+static void KeySniffer(unsigned char scancode, int down)
+{
+	int i;
+
+	//
+	// There are certain keys that will definately get held down
+	// and we can't interfere with that.
+	//
+	switch (scancode) {
+	case 0x12:		/* left  shift */
+	case 0x59:		/* right shift */
+	case 0x14:		/* left  ctrl  */
+	case 0x94:		/* right ctrl  */
+	case 0x11:		/* left  alt   */
+	case 0x91:		/* right alt   */
+	case 0x58:		/* caps lock   */
+	case 0x77:		/* Num lock    */
+		//printk("Snuff - %02x, %d\n", scancode, down);
+		handle_scancode(scancode, down);
+		return;
+
+	default:
+		break;
+	}
+	
+	//printk("Sniff - %02x, %d\n", scancode, down );
+
+	//
+	// Go thru our array, looking for the key.  If it already
+	// is recorded, update its count.
+	// Also look for empty cells in the array in case we
+	// need one.
+	//
+	for (i = 0; i < MAX_KEYS_DOWN; i++) {
+		//
+		// If this is a key up in our list then we are done.
+		//
+		if (down == 0) {
+			if (KeyTracker[i].scancode == scancode) {
+				KeyTracker[i].count = 0;
+				KeyTracker[i].scancode = 0;
+				handle_scancode(scancode, down);
+				break;
+			}
+		}
+		//
+		// Hey here's an unused cell.  Save its index.
+		//
+		else if (KeyTracker[i].count == 0) {
+			KeyTracker[i].scancode = scancode;
+			KeyTracker[i].count = 1;
+			handle_scancode(scancode, down);
+			break;
+		}
+	}
+}
+
+//=============================================================================
+// Check4StuckKeys
+//=============================================================================
+// When a key is held down longer than 1/2 sec, it start repeating
+// 10 times a second.  What we do is watch how long each key is
+// held down.  If longer than X where X is less than 1/2 second
+// then we assume it is stuck and issue the key up.  If we were
+// wrong and the key really is being held down, no problem because
+// the keyboard is about to start sending it to us repeatedly
+// anyway.
+//=============================================================================
+static void Check4StuckKeys(void)
+{
+	int i;
+
+	for (i = 0; i < MAX_KEYS_DOWN; i++) {
+		if (KeyTracker[i].count) {
+			KeyTracker[i].count++;
+			if (KeyTracker[i].count >= EP93XX_MAX_KEY_DOWN_COUNT) {
+				handle_scancode(KeyTracker[i].scancode, 0);
+				KeyTracker[i].count = 0;
+				KeyTracker[i].scancode = 0;
+			}
+		}
+	}
+}
+
+
+//=============================================================================
+// HandleKeyPress
+//=============================================================================
+// Checks if there are any keys in the FIFO and processes them if there are.
+//=============================================================================
+void HandleKeyPress(unsigned int Data)
+{
+	static unsigned char ucKScan[4] = { 0, 0, 0, 0 };
+	static unsigned int ulNum = 0;
+	int bParityValid;
+
+	//
+	// No keys to decode, but the timer went off and is calling us
+	// to check for stuck keys.
+	//
+	if (Data == -1) {
+		Check4StuckKeys();
+		return;
+	}
+	//
+	// Read in the value from the SPI controller.
+	//
+	ucKScan[ulNum++] = SPI2KScan(Data, &bParityValid);
+
+	//
+	// Bad parity?  We should read the rest of the fifo and
+	// throw it away, because it will all be bad.  Then the
+	// SSP will be reset when we close the SSP driver and 
+	// all will be good again.
+	//
+	if (!bParityValid){
+		//	printk("_BAD_PARITY_");  
+		ulNum = 0;
+	}
+	//
+	// If we have one character in the array, do the following.
+	//
+	if (ulNum == 1) {
+		//
+		// If it is a simple key without the extended scan code perform 
+		// following.
+		//
+		if (ucKScan[0] < KSCAN_TABLE_SIZE) {
+			DPRINTK("1:Dn %02x\n", ucKScan[0]);
+			KeySniffer(ucKScan[0], 1);
+			ulNum = 0;
+		}
+		//
+		// I don't know what type of character this is so erase the 
+		// keys stored in the buffer and continue.
+		//
+		else if ((ucKScan[0] != 0xF0) && (ucKScan[0] != 0xE0)) {
+			DPRINTK("1:oops - %02x\n", ucKScan[0]);
+			ulNum = 0;
+		}
+	} else if (ulNum == 2) {
+		//
+		// 0xF0 means that a key has been released.
+		//
+		if (ucKScan[0] == 0xF0) {
+			//
+			// If it is a simple key without the extended scan code 
+			// perform the following.
+			//
+			if (ucKScan[1] < KSCAN_TABLE_SIZE) {
+				DPRINTK("2:Up %02x %02x\n", ucKScan[0],
+					ucKScan[1]);
+				KeySniffer(ucKScan[1], 0);
+				ulNum = 0;
+			}
+			//
+			// If it a extended kscan continue to get the next byte.
+			//
+			else if (ucKScan[1] != 0xE0) {
+				DPRINTK("2:oops - %02x %02x\n", ucKScan[0],
+					ucKScan[1]);
+				ulNum = 0;
+			}
+		}
+		//
+		// Find out what extended code it is.
+		//
+		else if (ucKScan[0] == 0xE0 && ucKScan[1] != 0xF0) {
+			DPRINTK("2:Dn %02x %02x\n", ucKScan[0], ucKScan[1]);
+			KeySniffer(EXTENDED_KEY | ucKScan[1], 1);
+			ulNum = 0;
+		}
+	}
+	//
+	// This means that an extended code key has been released.
+	//
+	else if (ulNum == 3) {
+		//
+		// 0xF0 means that a key has been released.
+		//
+		if (ucKScan[0] == 0xE0 && ucKScan[1] == 0xF0) {
+			DPRINTK("3:Up %02x %02x %02x",
+				ucKScan[0], ucKScan[1], ucKScan[2]);
+			KeySniffer(EXTENDED_KEY | ucKScan[2], 0);
+		} else {
+			DPRINTK("3:oops - %02x %02x %02x\n",
+				ucKScan[0], ucKScan[1], ucKScan[2]);
+		}
+		ulNum = 0;
+	}
+}
+
+//=============================================================================
+// SPI2KScan
+//=============================================================================
+// Get a character from the spi port if it is available.
+// 
+// Below is a picture of the spi signal from the PS2. 
+//
+//CK HHllllHHLLLHHHLLLHHHLLLHHHLLLHHHLLLHHHLLLHHHLLLHHHLLLHHHLLLHHHLLLHHHLLLHllll
+//DA HHHllllll000000111111222222333333444444555555666666777777ppppppssssssLLLLHHH
+//        ^                                                                ^
+//    start bit                                                   important bit
+// 
+//where:  l = 8042 driving the line 
+//        L = KEYBOARD driving the line
+//        1..7 data
+//         = Parity 8042 driving
+//        s = stop   8042 driving
+//         = PARITY KEYBOARD driving the line
+//        S = STOP   KEYBOARD driving the line
+//
+//  In our design the value comes high bit first and is inverted.  So we must
+//  convert it to low byte first and then inverted it back.
+//
+//=============================================================================
+static unsigned char SPI2KScan(unsigned int uiSPIValue, int *pValid)
+{
+	unsigned char ucKScan = 0;
+	unsigned int uiParity = 0;
+	unsigned int uiCount = 0;
+
+	for (uiCount = 1; uiCount < 10; uiCount++) {
+		uiParity += (uiSPIValue >> uiCount) & 0x1;
+	}
+
+	if (!(uiParity & 0x1) && (uiSPIValue & 0x401) == 0x400) {
+		*pValid = 1;
+
+		//
+		// Invert the pattern.
+		//
+		uiSPIValue = ~uiSPIValue;
+
+		//
+		// Read in the value from the motorola spi file
+		//
+		ucKScan = (unsigned char)((uiSPIValue & 0x004) << 5);
+		ucKScan |= (unsigned char)((uiSPIValue & 0x008) << 3);
+		ucKScan |= (unsigned char)((uiSPIValue & 0x010) << 1);
+		ucKScan |= (unsigned char)((uiSPIValue & 0x020) >> 1);
+		ucKScan |= (unsigned char)((uiSPIValue & 0x040) >> 3);
+		ucKScan |= (unsigned char)((uiSPIValue & 0x080) >> 5);
+		ucKScan |= (unsigned char)((uiSPIValue & 0x100) >> 7);
+		ucKScan |= (unsigned char)((uiSPIValue & 0x200) >> 9);
+	} else {
+		*pValid = 0;
+	}
+
+	return (ucKScan);
+}
+
+//=============================================================================
+// EP93XXSpiKbdInit
+//=============================================================================
+int __init EP93XXSpiKbdInit(void)
+{
+	int i;
+	printk("%s\n", name);
+
+        ep93xxkbd_dev = input_allocate_device();
+	if(ep93xxkbd_dev==0){
+		DPRINTK("Allocate input device \n");
+		return -1;
+	}
+	ep93xxkbd_dev->name = name;
+	ep93xxkbd_dev->evbit[0] = BIT(EV_KEY);
+
+	for (i = 0; i < KSCAN_TABLE_SIZE; i++)
+		set_bit(KScanCodeToVKeyTable[i], ep93xxkbd_dev->keybit);
+
+	input_register_device(ep93xxkbd_dev);
+
+	/* Open SSP driver for Keyboard input. */
+	g_SSP_Handle = SSPDriver->Open(PS2_KEYBOARD, HandleKeyPress);
+
+	InitSniffer();
+
+	DPRINTK("Leaving EP93XXSpiKbdInit()\n");
+
+	return 0;
+}
+
+void __exit EP93XXSpiKbdCleanup(void)
+{
+	SSPDriver->Close(g_SSP_Handle);
+
+	input_unregister_device(ep93xxkbd_dev);
+}
+
+module_init(EP93XXSpiKbdInit);
+module_exit(EP93XXSpiKbdCleanup);
+MODULE_LICENSE("GPL");
diff -burN linux-2.6.20.4/drivers/input/keyboard/ep93xx_spi_kbd.h linux/drivers/input/keyboard/ep93xx_spi_kbd.h
--- linux-2.6.20.4/drivers/input/keyboard/ep93xx_spi_kbd.h	1970-01-01 08:00:00.000000000 +0800
+++ linux/drivers/input/keyboard/ep93xx_spi_kbd.h	2007-03-28 14:21:24.000000000 +0800
@@ -0,0 +1,149 @@
+/*
+ * ep93xx_spi_kbd.h Keymap definitions (to be cleaned up)
+ */
+
+#define KSCAN_TABLE_SIZE    0x88
+
+#define EXTENDED_KEY     0x80
+
+//
+// This table is used to map the scan code to the Linux default keymap.
+//
+static unsigned int const KScanCodeToVKeyTable[KSCAN_TABLE_SIZE] = {
+	KEY_RESERVED,		// Scan Code 0x0
+	KEY_F9,			// Scan Code 0x1
+	KEY_RESERVED,		// Scan Code 0x2
+	KEY_F5,			// Scan Code 0x3
+	KEY_F3,			// Scan Code 0x4
+	KEY_F1,			// Scan Code 0x5
+	KEY_F2,			// Scan Code 0x6
+	KEY_F12,		// Scan Code 0x7
+	KEY_RESERVED,		// Scan Code 0x8
+	KEY_F10,		// Scan Code 0x9
+	KEY_F8,			// Scan Code 0xA
+	KEY_F6,			// Scan Code 0xB
+	KEY_F4,			// Scan Code 0xC
+	KEY_TAB,		// Scan Code 0xD Tab
+	KEY_GRAVE,		// Scan Code 0xE '
+	KEY_RESERVED,		// Scan Code 0xF
+	KEY_RESERVED,		// Scan Code 0x10
+	KEY_LEFTALT,		// Scan Code 0x11 Left Menu
+	KEY_LEFTSHIFT,		// Scan Code 0x12 Left Shift
+	KEY_RESERVED,		// Scan Code 0x13
+	KEY_LEFTCTRL,		// Scan Code 0x14
+	KEY_Q,			// Scan Code 0x15
+	KEY_1,			// Scan Code 0x16
+	KEY_RESERVED,		// Scan Code 0x17
+	KEY_RESERVED,		// Scan Code 0x18
+	KEY_RESERVED,		// Scan Code 0x19
+	KEY_Z,			// Scan Code 0x1A
+	KEY_S,			// Scan Code 0x1B
+	KEY_A,			// Scan Code 0x1C
+	KEY_W,			// Scan Code 0x1D
+	KEY_2,			// Scan Code 0x1E
+	KEY_RESERVED,		// Scan Code 0x1F
+	KEY_RESERVED,		// Scan Code 0x20
+	KEY_C,			// Scan Code 0x21
+	KEY_X,			// Scan Code 0x22
+	KEY_D,			// Scan Code 0x23
+	KEY_E,			// Scan Code 0x24
+	KEY_4,			// Scan Code 0x25
+	KEY_3,			// Scan Code 0x26
+	KEY_RESERVED,		// Scan Code 0x27
+	KEY_RESERVED,		// Scan Code 0x28
+	KEY_SPACE,		// Scan Code 0x29  Space
+	KEY_V,			// Scan Code 0x2A
+	KEY_F,			// Scan Code 0x2B
+	KEY_T,			// Scan Code 0x2C
+	KEY_R,			// Scan Code 0x2D
+	KEY_5,			// Scan Code 0x2E
+	KEY_RESERVED,		// Scan Code 0x2F
+	KEY_RESERVED,		// Scan Code 0x30
+	KEY_N,			// Scan Code 0x31
+	KEY_B,			// Scan Code 0x32 B
+	KEY_H,			// Scan Code 0x33
+	KEY_G,			// Scan Code 0x34
+	KEY_Y,			// Scan Code 0x35
+	KEY_6,			// Scan Code 0x36
+	KEY_RESERVED,		// Scan Code 0x37
+	KEY_RESERVED,		// Scan Code 0x38
+	KEY_RESERVED,		// Scan Code 0x39
+	KEY_M,			// Scan Code 0x3A
+	KEY_J,			// Scan Code 0x3B
+	KEY_U,			// Scan Code 0x3C
+	KEY_7,			// Scan Code 0x3D
+	KEY_8,			// Scan Code 0x3E
+	KEY_RESERVED,		// Scan Code 0x3F
+	KEY_RESERVED,		// Scan Code 0x40
+	KEY_COMMA,		// Scan Code 0x41
+	KEY_K,			// Scan Code 0x42
+	KEY_I,			// Scan Code 0x43       
+	KEY_O,			// Scan Code 0x44
+	KEY_0,			// Scan Code 0x45
+	KEY_9,			// Scan Code 0x46
+	KEY_RESERVED,		// Scan Code 0x47
+	KEY_RESERVED,		// Scan Code 0x48
+	KEY_DOT,		// Scan Code 0x49
+	KEY_SLASH,		// Scan Code 0x4A
+	KEY_L,			// Scan Code 0x4B
+	KEY_SEMICOLON,		// Scan Code 0x4C
+	KEY_P,			// Scan Code 0x4D
+	KEY_MINUS,		// Scan Code 0x4E
+	KEY_RESERVED,		// Scan Code 0x4F
+	KEY_RESERVED,		// Scan Code 0x50
+	KEY_RESERVED,		// Scan Code 0x51
+	KEY_APOSTROPHE,		// Scan Code 0x52
+	KEY_RESERVED,		// Scan Code 0x53
+	KEY_LEFTBRACE,		// Scan Code 0x54
+	KEY_EQUAL,		// Scan Code 0x55
+	KEY_BACKSPACE,		// Scan Code 0x56
+	KEY_RESERVED,		// Scan Code 0x57
+	KEY_CAPSLOCK,		// Scan Code 0x58 Caps Lock
+	KEY_RIGHTSHIFT,		// Scan Code 0x59 Right Shift
+	KEY_ENTER,		// Scan Code 0x5A
+	KEY_RIGHTBRACE,		// Scan Code 0x5B
+	KEY_RESERVED,		// Scan Code 0x5C
+	KEY_BACKSLASH,		// Scan Code 0x5D
+	KEY_RESERVED,		// Scan Code 0x5E
+	KEY_RESERVED,		// Scan Code 0x5F
+	KEY_RESERVED,		// Scan Code 0x60
+	KEY_BACKSLASH,		// Scan Code 0x61 ?? //VK_BSLH,            
+	KEY_RESERVED,		// Scan Code 0x62
+	KEY_RESERVED,		// Scan Code 0x63
+	KEY_RESERVED,		// Scan Code 0x64
+	KEY_RESERVED,		// Scan Code 0x65
+	KEY_BACKSPACE,		// Scan Code 0x66 ?? //VK_BKSP,            
+	KEY_RESERVED,		// Scan Code 0x67
+	KEY_RESERVED,		// Scan Code 0x68
+	KEY_KP1,		// Scan Code 0x69
+	KEY_RESERVED,		// Scan Code 0x6A
+	KEY_KP4,		// Scan Code 0x6B
+	KEY_KP7,		// Scan Code 0x6C
+	KEY_RESERVED,		// Scan Code 0x6D
+	KEY_RESERVED,		// Scan Code 0x6E
+	KEY_RESERVED,		// Scan Code 0x6F
+	KEY_KP0,		// Scan Code 0x70
+	KEY_KPDOT,		// Scan Code 0x71 DECIMAL??
+	KEY_KP2,		// Scan Code 0x72
+	KEY_KP5,		// Scan Code 0x73
+	KEY_KP6,		// Scan Code 0x74
+	KEY_KP8,		// Scan Code 0x75
+	KEY_ESC,		// Scan Code 0x76
+	KEY_NUMLOCK,		// Scan Code 0x77
+	KEY_F11,		// Scan Code 0x78
+	KEY_KPPLUS,		// Scan Code 0x79
+	KEY_KP3,		// Scan Code 0x7A
+	KEY_KPMINUS,		// Scan Code 0x7B
+	KEY_KPASTERISK,		// Scan Code 0x7C
+	KEY_KP9,		// Scan Code 0x7D
+	KEY_SCROLLLOCK,		// Scan Code 0x7E
+	KEY_RESERVED,		// Scan Code 0x7F
+	KEY_RESERVED,		// Scan Code 0x80      
+	KEY_RESERVED,		// Scan Code 0x81
+	KEY_RESERVED,		// Scan Code 0x82
+	KEY_F7,			// Scan Code 0x83
+	KEY_RESERVED,		// Scan Code 0x84
+	KEY_RESERVED,		// Scan Code 0x85
+	KEY_RESERVED,		// Scan Code 0x86
+	KEY_RESERVED		// Scan Code 0x87
+};
diff -burN linux-2.6.20.4/drivers/input/keyboard/Kconfig linux/drivers/input/keyboard/Kconfig
--- linux-2.6.20.4/drivers/input/keyboard/Kconfig	2007-04-24 10:43:21.000000000 +0800
+++ linux/drivers/input/keyboard/Kconfig	2007-03-28 14:33:57.000000000 +0800
@@ -214,4 +214,22 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called aaed2000_kbd.
 
+config KEYBOARD_EP93XX_SPI
+	tristate "EP93xx PS2 Keyboard support"
+	depends on ARCH_EP93XX && INPUT && INPUT_KEYBOARD
+	help
+	  Say Y here if you want support for a PS2 keyboard connected via SPI.
+
+config KEYBOARD_EP93XX_KEYPAD
+	tristate "EP93xx 8x8 Keypad support"
+	depends on ARCH_EP93XX && INPUT && INPUT_KEYBOARD
+	help
+	  Say Y here if you want support for an 8x8 keypad.
+
+config KEYBOARD_EP93XX_SCROLL_WHEEL
+	bool "EP93xx Scrollwheel support"
+	depends on KEYBOARD_EP93XX_KEYPAD
+	help
+	  Say Y here if you want support for a Scroll Wheel.
+
 endif
diff -burN linux-2.6.20.4/drivers/input/keyboard/Makefile linux/drivers/input/keyboard/Makefile
--- linux-2.6.20.4/drivers/input/keyboard/Makefile	2007-04-24 10:43:21.000000000 +0800
+++ linux/drivers/input/keyboard/Makefile	2007-03-28 14:37:04.000000000 +0800
@@ -18,4 +18,5 @@
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
 obj-$(CONFIG_KEYBOARD_OMAP)             += omap-keypad.o
 obj-$(CONFIG_KEYBOARD_AAED2000)         += aaed2000_kbd.o
-
+obj-$(CONFIG_KEYBOARD_EP93XX_SPI)       += ep93xx_spi_kbd.o
+obj-$(CONFIG_KEYBOARD_EP93XX_KEYPAD)    += ep93xx_keypad.o
diff -burN linux-2.6.20.4/drivers/input/touchscreen/ep93xx_ts.c linux/drivers/input/touchscreen/ep93xx_ts.c
--- linux-2.6.20.4/drivers/input/touchscreen/ep93xx_ts.c	1970-01-01 08:00:00.000000000 +0800
+++ linux/drivers/input/touchscreen/ep93xx_ts.c	2007-03-28 14:46:10.000000000 +0800
@@ -0,0 +1,1104 @@
+/*
+ *  linux/drivers/char/ep93xx_ts.c
+ *
+ *  Copyright (C) 2003-2004 Cirrus Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+ 
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/poll.h>
+#include <linux/miscdevice.h>
+#include <linux/init.h>
+#include <linux/compiler.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/syscalls.h>
+#include <linux/input.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+//
+// To customize for a new touchscreen, there are various macros that
+// have to be set.  If you allow UART_HACK_DEBUG to be defined, you
+// will get real time ts data scrolling up your serial terminal
+// screen that will help you empirically determine good values for these.  
+//
+
+//
+// These are used as trigger levels to know when we have pen up/down
+//
+// The rules:
+// 1.  TS_HEAVY_INV_PRESSURE < TS_LIGHT_INV_PRESSURE because these
+//    are Inverse pressure.  
+// 2.  Any touch lighter than TS_LIGHT_INV_PRESSURE is a pen up.
+// 3.  Any touch heavier than TS_HEAVY_INV_PRESSURE is a pen down.
+//
+#define   TS_HEAVY_INV_PRESSURE 0xFE0 //C00
+#define   TS_LIGHT_INV_PRESSURE 0xFFF //e00
+
+//
+// If the x, y, or inverse pressure changes more than these values
+// between two succeeding points, the point is not reported.
+//
+#define   TS_MAX_VALID_XY_CHANGE 0x300
+#define   TS_MAX_VALID_PRESSURE_CHANGE  0x100
+
+//
+// This is the minimum Z1 Value that is valid.
+//
+#define     MIN_Z1_VALUE                    0x50
+
+//
+// Settling delay for taking each ADC measurement.  Increase this
+// if ts is jittery.
+//
+#define EP93XX_TS_ADC_DELAY_USEC 2000
+
+//
+// Delay between TS points.
+//
+#define EP93XX_TS_PER_POINT_DELAY_USEC 10000
+
+//-----------------------------------------------------------------------------
+// Debug messaging thru the UARTs
+//-----------------------------------------------------------------------------
+/*
+ *  Hello there!  Are you trying to get this driver to work with a new
+ *  touschscreen?  Turn this on and you will get useful info coming
+ *  out of your serial port.
+ */
+/* #define PRINT_CALIBRATION_FACTORS */
+#ifdef PRINT_CALIBRATION_FACTORS
+#define UART_HACK_DEBUG 1
+int iMaxX=0, iMaxY=0, iMinX = 0xfff, iMinY = 0xfff;
+#endif
+
+/*
+ * For debugging, let's spew messages out serial port 1 or 3 at 57,600 baud.
+ */
+/* #define UART_HACK_DEBUG 1 */
+#if 0
+#ifdef UART_HACK_DEBUG
+static char szBuf[256];
+void UARTWriteString(char * msg);
+#define DPRINTK( x... )   \
+    sprintf( szBuf, ##x ); \
+    UARTWriteString( szBuf );
+#else
+static char szBuf[256];
+#define DPRINTK( x... )  \
+    sprintf( szBuf, ##x ); \
+    printk( szBuf );
+#endif
+#endif // 0
+#define DPRINTK( x... ) 
+
+//-----------------------------------------------------------------------------
+// A few more macros...
+//-----------------------------------------------------------------------------
+#define TSSETUP_DEFAULT  ( TSSETUP_NSMP_32 | TSSETUP_DEV_64 |  \
+                           ((128<<TSSETUP_SDLY_SHIFT) & TSSETUP_SDLY_MASK) | \
+                           ((128<<TSSETUP_DLY_SHIFT)  & TSSETUP_DLY_MASK) )
+
+#define TSSETUP2_DEFAULT (TSSETUP2_NSIGND)
+
+//
+// For now, we use one of the minor numbers from the local/experimental
+// range.
+//
+#define EP93XX_TS_MINOR 240
+
+//-----------------------------------------------------------------------------
+// Static Declarations
+//-----------------------------------------------------------------------------
+static unsigned int   guiLastX, guiLastY;
+static unsigned int   guiLastInvPressure;
+
+struct TouchScreenSample
+{
+    int     currentX;
+    int     currentY;
+    int     currentButton;
+    int     currentPressure;
+    struct timeval currentTime;
+};
+
+//
+// This must match the structure in tslib.
+//
+struct ts_sample {
+    int     x;
+    int     y;
+    unsigned int    pressure;
+    struct timeval  tv;
+};
+
+
+static struct TouchScreenSample gSample;
+
+// static int currentX, currentY, currentButton;
+// static int gPressure;
+// static struct timeval  gtime;
+
+static int bFreshTouchData;
+static int bCurrentPenDown;
+
+
+
+static DECLARE_WAIT_QUEUE_HEAD(queue);
+static DECLARE_MUTEX(open_sem);
+static spinlock_t event_buffer_lock = SPIN_LOCK_UNLOCKED;
+static struct fasync_struct *ep93xx_fasync;
+
+//-----------------------------------------------------------------------------
+// Typedef Declarations
+//-----------------------------------------------------------------------------
+typedef enum {
+    TS_MODE_UN_INITIALIZED,
+    TS_MODE_HARDWARE_SCAN,
+    TS_MODE_SOFT_SCAN
+} ts_mode_t;
+
+static ts_mode_t      gScanningMode;
+
+typedef enum{
+    TS_STATE_STOPPED = 0,
+    TS_STATE_Z1,
+    TS_STATE_Z2,
+    TS_STATE_Y,
+    TS_STATE_X,
+    TS_STATE_DONE
+} ts_states_t;
+
+typedef struct 
+{
+    unsigned int   uiX;
+    unsigned int   uiY;
+    unsigned int   uiZ1;
+    unsigned int   uiZ2;
+    ts_states_t    state;
+} ts_struct_t;
+
+static ts_struct_t sTouch;
+
+/*
+ * From the spec, here's how to set up the touch screen's switch registers.
+ */
+typedef struct 
+{
+    unsigned int uiDetect;
+    unsigned int uiDischarge;
+    unsigned int uiXSample;
+    unsigned int uiYSample;
+    unsigned int uiSwitchZ1;
+    unsigned int uiSwitchZ2;
+}SwitchStructType;
+
+//
+// Here's the switch settings for a 4-wire touchscreen.  See the spec
+// for how to handle a 4, 7, or 8-wire.
+//
+const static SwitchStructType sSwitchSettings = 
+/*     s28en=0
+ *   TSDetect    TSDischarge  TSXSample  TSYSample    SwitchZ1   SwitchZ2
+ */
+    {0x00403604, 0x0007fe04, 0x00081604, 0x00104601, 0x00101601, 0x00101608};   
+
+
+//-----------------------------------------------------------------------------
+// Function Declarations
+//-----------------------------------------------------------------------------
+static void ep93xx_ts_set_direct( unsigned int uiADCSwitch );
+static irqreturn_t ep93xx_ts_isr(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t ep93xx_timer2_isr(int irq, void *dev_id, struct pt_regs *regs);
+static void ee93xx_ts_evt_add( int button, int dX, int dY, int Pressure );
+static ssize_t ep93xx_ts_read(struct file *filp, char *buf, 
+        size_t count, loff_t *l);
+static unsigned int ep93xx_ts_poll(struct file *filp, poll_table *wait);
+static int ep93xx_ts_open(struct inode *inode, struct file *filp);
+static int ep93xx_ts_fasync(int fd, struct file *filp, int on);
+static int ep93xx_ts_release(struct inode *inode, struct file *filp);
+static ssize_t ep93xx_ts_write(struct file *file, const char *buffer, 
+                size_t count, loff_t *ppos);
+static void ep93xx_ts_setup(void);
+static void ep93xx_ts_shutdown(void);
+int __init ep93xx_ts_init(void);
+void __exit ep93xx_ts_exit(void);
+static unsigned int CalculateInvPressure( void );
+static unsigned int ADCGetData( unsigned int uiSamples, unsigned int uiMaxDiff);
+static void TS_Soft_Scan_Mode(void);
+static void TS_Hardware_Scan_Mode(void);
+static void ProcessPointData(void);
+static void Set_Timer2_uSec( unsigned int Delay_mSec );
+static void Stop_Timer2(void);
+
+
+
+//-----------------------------------------------------------------------------
+//  Debug stuff...
+//-----------------------------------------------------------------------------
+
+#ifdef UART_HACK_DEBUG
+
+// This "array" is a cheap-n-easy way of getting access to the UART registers.
+static unsigned int * const pDebugUART=(unsigned int *)IO_ADDRESS(UART1_BASE);
+//static unsigned int * const pDebugUART=(unsigned int *)IO_ADDRESS(UART3_BASE);
+static int bUartInitialized = 0; 
+
+void SendChar(char value)
+{
+    // wait for Tx fifo full flag to clear.
+    while (pDebugUART[0x18>>2] & 0x20);
+
+    // send a char to the uart               
+    pDebugUART[0] = value;
+}
+
+void UARTWriteString(char * msg) 
+{
+    int index = 0;
+    unsigned int uiTemp;
+
+    //if((pDebugUART[0x14>>2] & 0x1) == 0)
+    if( bUartInitialized == 0 )
+    {
+        uiTemp = inl(SYSCON_DEVCFG);
+        uiTemp |= SYSCON_DEVCFG_U1EN;
+        //uiTemp |= SYSCON_DEVCFG_U3EN;
+        SysconSetLocked(SYSCON_DEVCFG, uiTemp);  
+        pDebugUART[0x10>>2] = 0xf;
+        pDebugUART[0xc>>2] = 0;
+        pDebugUART[0x8>>2] = 0x70;
+        pDebugUART[0x14>>2] = 0x1;
+        bUartInitialized = 1;
+    }
+    while (msg[index] != 0)
+    {
+        if (msg[index] == '\n')
+        {
+            SendChar('\r');
+            SendChar('\n');
+        }
+        else 
+        {
+            SendChar(msg[index]);
+        }
+        index++;
+    }
+}
+#endif // UART_HACK_DEBUG
+
+/*
+ *  ep93xx_ts_isr
+ */
+static irqreturn_t ep93xx_ts_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+    DPRINTK("isr\n");
+
+    // 
+    // Note that we don't clear the interrupt here.  The interrupt
+    // gets cleared in TS_Soft_Scan_Mode when the TS ENABLE
+    // bit is cleared.
+    //
+
+    //
+    // Set the ts to manual polling mode and schedule a callback.
+    // That way we can return from the isr in a reasonable amount of
+    // time and process the touch in the callback after a brief delay.
+    //
+    TS_Soft_Scan_Mode();
+    
+    return(IRQ_HANDLED);
+}
+ 
+/*
+ * Save the current ts 'event' in an atomic fashion.
+ */
+static void ee93xx_ts_evt_add( int buttons, int iX, int iY, int iPressure )
+{
+#ifdef PRINT_CALIBRATION_FACTORS
+    if( iX > iMaxX ) iMaxX = iX;
+    if( iX < iMinX ) iMinX = iX;
+    if( iY > iMaxY ) iMaxY = iY;
+    if( iY < iMinY ) iMinY = iY;
+#endif
+
+    
+    // printk("ee93xx_ts_evt_add\n");
+    //DPRINTK("cb\n");
+    /*
+     * Note the event, but use spinlocks to keep it from getting
+     * halfway read if we get interrupted.
+     */  
+    
+    spin_lock(&event_buffer_lock);
+    gSample.currentX        = iX;
+    gSample.currentY        = iY;
+    gSample.currentButton   = buttons;
+    gSample.currentPressure = iPressure;
+    bFreshTouchData         = 1;
+    do_gettimeofday(&gSample.currentTime);
+
+    
+    spin_unlock(&event_buffer_lock);
+
+    kill_fasync(&ep93xx_fasync, SIGIO, POLL_IN);
+    wake_up_interruptible(&queue);
+
+}
+
+
+static ssize_t ep93xx_ts_read(struct file *filp, char *buf, size_t count, loff_t *l)
+{
+
+    unsigned short data[3];
+    struct  ts_sample   ts_data;
+    int     iReturn = -EFAULT;
+    // printk("ep93xx_ts_read\n");
+
+#ifdef PRINT_CALIBRATION_FACTORS
+    static int lala=0;
+    if( bFreshTouchData && (lala++ > 9) )
+    {
+        DPRINTK("%4d, %4d - range [%4d to %4d],[%4d to %4d]\n",
+            f, currentY, iMinX, iMaxX, iMinY, iMaxY );
+        lala = 0;
+    }
+#endif
+    if( !bFreshTouchData)
+    {
+        iReturn = 0;
+    }        
+    else if( (count == sizeof(data)) )
+    {
+        spin_lock_irq(&event_buffer_lock);
+        bFreshTouchData = 0;
+        data[0] = gSample.currentX;
+        data[1] = gSample.currentY;
+        data[2] = gSample.currentButton;
+        
+        spin_unlock_irq(&event_buffer_lock);
+
+        if (copy_to_user(buf, data, sizeof data))
+            return -EFAULT;
+
+        count -= sizeof(data);
+
+        /* return the # of bytes that got read */
+        iReturn = sizeof(data) ;
+    }
+    else if (count == sizeof(struct ts_sample) )
+    {
+        spin_lock_irq(&event_buffer_lock);
+        bFreshTouchData = 0;
+        ts_data.x           = gSample.currentX;
+        ts_data.y           = gSample.currentY;
+        ts_data.pressure    = gSample.currentPressure;
+        ts_data.tv          = gSample.currentTime;
+        spin_unlock_irq(&event_buffer_lock);
+        
+        if (copy_to_user(buf, &ts_data, sizeof(struct ts_sample)))
+        {
+            iReturn = -EFAULT;
+        }
+        else
+        {                
+            count -= sizeof(ts_data);
+            iReturn = sizeof(ts_data);
+        }            
+
+    }
+
+    return iReturn;
+}
+
+static unsigned int ep93xx_ts_poll(struct file *filp, poll_table *wait)
+{
+    // printk("ep93xx_ts_poll\n");
+    poll_wait(filp, &queue, wait);
+
+    if( bFreshTouchData )
+    {
+        return POLLIN | POLLRDNORM;
+    }
+    
+    return 0;
+}
+
+static int ep93xx_ts_open(struct inode *inode, struct file *filp)
+{
+    // printk("ep93xx_ts_open");
+
+    if( down_trylock(&open_sem) )
+    {
+        return -EBUSY;
+    }
+
+    ep93xx_ts_setup();
+
+    return 0;
+}
+
+/*
+ * Asynchronous I/O support.
+ */
+static int ep93xx_ts_fasync(int fd, struct file *filp, int on)
+{
+    int retval;
+
+    retval = fasync_helper(fd, filp, on, &ep93xx_fasync);
+    if (retval < 0)
+    {
+        return retval;
+    }
+    
+    return 0;
+}
+
+static int ep93xx_ts_release(struct inode *inode, struct file *filp)
+{
+    Stop_Timer2();
+
+    /*
+     * Call our async I/O support to request that this file 
+     * cease to be used for async I/O.
+     */
+    ep93xx_ts_fasync(-1, filp, 0);
+
+    ep93xx_ts_shutdown();
+    
+    up(&open_sem);
+    
+    return 0;
+}
+
+static ssize_t ep93xx_ts_write(struct file *file, const char *buffer, size_t count,
+               loff_t *ppos)
+{
+    return -EINVAL;
+}
+
+
+static int ep93xx_ts_ioctl(struct inode *inode, struct file *file, uint command, ulong u)
+{
+    static const int         version = EV_VERSION;   
+    static const u_int32_t   bit =(1 << EV_ABS);
+    static const u_int32_t   absbit = (1 << ABS_X) | (1 << ABS_Y) | (1 << ABS_PRESSURE);
+    int         iReturn ;
+    int         i = 0;
+    
+    switch(command)
+    {
+        case EVIOCGVERSION:
+            DPRINTK("ep93xx_ts_ioctl command = EVIOCGVERSION\r\n");
+            i = copy_to_user((void __user *)u, (void *)version, sizeof(version));
+            iReturn = i ? -EFAULT : 0;
+            break;
+            
+        case EVIOCGBIT(0,sizeof(u_int32_t) * 8) :
+            DPRINTK("ep93xx_ts_ioctl command = EVIOCGBIT(0,sizeof(uint32) * 8)\r\n");
+            i = copy_to_user((void __user *)u, (void *)bit, sizeof(bit));
+            iReturn = i ? -EFAULT : 0;
+            break;
+            
+        case EVIOCGBIT(EV_ABS, sizeof(absbit) * 8):
+            DPRINTK("ep93xx_ts_ioctl command = EVIOCGBIT(0,sizeof(uint32) * 8)\r\n");
+            copy_to_user((void __user *)u, (void *)absbit, sizeof(absbit));
+            iReturn = i ? -EFAULT : 0;
+            break;
+        default:
+            DPRINTK(" ep93xx_ts_ioctl unknown command = %d\n",u);           
+            iReturn = -1;
+            break;
+    }            
+    
+    return iReturn;
+}
+
+static struct file_operations ep93xx_ts_fops = {
+    owner:      THIS_MODULE,
+    read:       ep93xx_ts_read,
+    write:      ep93xx_ts_write,
+    poll:       ep93xx_ts_poll,
+    open:       ep93xx_ts_open,
+    ioctl:      ep93xx_ts_ioctl,
+    release:    ep93xx_ts_release,
+    fasync:     ep93xx_ts_fasync,
+};
+
+static struct miscdevice ep93xx_ts_miscdev = 
+{
+        EP93XX_TS_MINOR,
+        "ep93xx_ts",
+        &ep93xx_ts_fops
+};
+
+void ep93xx_ts_setup(void)
+{
+    unsigned int uiKTDIV, uiTSXYMaxMin;
+    // printk("ep93xx_hw_setup\n");
+    
+    /*
+     * Set the TSEN bit in KTDIV so that we are enabling the clock
+     * for the touchscreen.
+     */    
+    uiKTDIV = inl(SYSCON_KTDIV);
+    uiKTDIV |= SYSCON_KTDIV_TSEN;
+    SysconSetLocked( SYSCON_KTDIV, uiKTDIV );    
+
+    //
+    // Program the TSSetup and TSSetup2 registers.
+    //
+    outl( TSSETUP_DEFAULT, TSSetup );
+    outl( TSSETUP2_DEFAULT, TSSetup2 );
+
+    //
+    // Set the the touch settings. 
+    //
+    outl( 0xaa, TSSWLock );
+    outl( sSwitchSettings.uiDischarge, TSDirect );
+
+    outl( 0xaa, TSSWLock );
+    outl( sSwitchSettings.uiDischarge, TSDischarge );
+
+    outl( 0xaa, TSSWLock );
+    outl( sSwitchSettings.uiSwitchZ1, TSXSample );
+
+    outl( 0xaa, TSSWLock );
+    outl( sSwitchSettings.uiSwitchZ2, TSYSample );
+
+    outl( 0xaa, TSSWLock );
+    outl( sSwitchSettings.uiDetect, TSDetect );
+
+    //
+    // X,YMin set to 0x40 = have to drag that many pixels for a new irq.
+    // X,YMax set to 0x40 = 1024 pixels is the maximum movement within the
+    // time scan limit.
+    //
+    uiTSXYMaxMin =  (50   << TSMAXMIN_XMIN_SHIFT) & TSMAXMIN_XMIN_MASK;
+    uiTSXYMaxMin |= (50   << TSMAXMIN_YMIN_SHIFT) & TSMAXMIN_YMIN_MASK;
+    uiTSXYMaxMin |= (0xff << TSMAXMIN_XMAX_SHIFT) & TSMAXMIN_XMAX_MASK;
+    uiTSXYMaxMin |= (0xff << TSMAXMIN_YMAX_SHIFT) & TSMAXMIN_YMAX_MASK;
+    outl( uiTSXYMaxMin, TSXYMaxMin );
+    
+    bCurrentPenDown = 0;
+    bFreshTouchData = 0;
+    guiLastX = 0;
+    guiLastY = 0;
+    guiLastInvPressure = 0xffffff;
+    
+    //
+    // Enable the touch screen scanning engine.
+    //
+    TS_Hardware_Scan_Mode();
+}
+
+/*
+ * ep93xx_ts_shutdown
+ *
+ */
+static void
+ep93xx_ts_shutdown(void)
+{
+    unsigned int uiKTDIV;
+    
+    DPRINTK("ep93xx_ts_shutdown\n");
+    
+    sTouch.state = TS_STATE_STOPPED;
+    Stop_Timer2();
+
+    /*
+     * Disable the scanning engine.
+     */
+    outl( 0, TSSetup );
+    outl( 0, TSSetup2 );
+
+    /*
+     * Clear the TSEN bit in KTDIV so that we are disabling the clock
+     * for the touchscreen.
+     */    
+    uiKTDIV = inl(SYSCON_KTDIV);
+    uiKTDIV &= ~SYSCON_KTDIV_TSEN;
+    SysconSetLocked( SYSCON_KTDIV, uiKTDIV );    
+
+} /* ep93xx_ts_shutdown */
+
+static irqreturn_t ep93xx_timer2_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+    DPRINTK("%d", (int)sTouch.state );
+
+    switch( sTouch.state )
+    {
+        case TS_STATE_STOPPED:
+            TS_Hardware_Scan_Mode();
+            break;
+            
+        //
+        // Get the Z1 value for pressure measurement and set up
+        // the switch register for getting the Z2 measurement.
+        //
+        case TS_STATE_Z1:
+            Set_Timer2_uSec( EP93XX_TS_ADC_DELAY_USEC );
+            sTouch.uiZ1 = ADCGetData( 2, 200 );
+            ep93xx_ts_set_direct( sSwitchSettings.uiSwitchZ2 );
+            sTouch.state = TS_STATE_Z2;
+            break;
+        
+        //
+        // Get the Z2 value for pressure measurement and set up
+        // the switch register for getting the Y measurement.
+        //
+        case TS_STATE_Z2:
+            sTouch.uiZ2 = ADCGetData( 2, 200 );
+            ep93xx_ts_set_direct( sSwitchSettings.uiYSample );
+            sTouch.state = TS_STATE_Y;
+            break;
+        
+        //
+        // Get the Y value and set up the switch register for 
+        // getting the X measurement.
+        //
+        case TS_STATE_Y:
+            sTouch.uiY = ADCGetData( 4, 20 );
+            ep93xx_ts_set_direct( sSwitchSettings.uiXSample );
+            sTouch.state = TS_STATE_X;
+            break;
+        
+        //
+        // Read the X value.  This is the last of the 4 adc values
+        // we need so we continue on to process the data.
+        //
+        case TS_STATE_X:
+            Stop_Timer2();
+            
+            sTouch.uiX = ADCGetData( 4, 20 );
+            
+            outl( 0xaa, TSSWLock );
+            outl( sSwitchSettings.uiDischarge, TSDirect );
+            
+            sTouch.state = TS_STATE_DONE;
+        
+            /*
+             * Process this set of ADC readings.
+             */
+            ProcessPointData();
+            
+            break;
+
+
+        //
+        // Shouldn't get here.  But if we do, we can recover...
+        //
+        case TS_STATE_DONE:
+            TS_Hardware_Scan_Mode();
+            break;
+    } 
+
+    //
+    // Clear the timer2 interrupt.
+    //
+    outl( 1, TIMER2CLEAR );
+    return(IRQ_HANDLED);
+}
+
+/*---------------------------------------------------------------------
+ * ProcessPointData
+ *
+ * This routine processes the ADC data into usable point data and then
+ * puts the driver into hw or sw scanning mode before returning.
+ *
+ * We calculate inverse pressure (lower number = more pressure) then
+ * do a hystheresis with the two pressure values 'light' and 'heavy'.
+ *
+ * If we are above the light, we have pen up.
+ * If we are below the heavy we have pen down.
+ * As long as the pressure stays below the light, pen stays down.
+ * When we get above the light again, pen goes back up.
+ *
+ */
+static void ProcessPointData(void)
+{
+    int  bValidPoint = 0;
+    unsigned int   uiXDiff, uiYDiff, uiInvPressureDiff;
+    unsigned int   uiInvPressure;
+
+    //
+    // Calculate the current pressure.
+    //
+    uiInvPressure = CalculateInvPressure();
+
+    DPRINTK(" X=0x%x, Y=0x%x, Z1=0x%x, Z2=0x%x, InvPressure=0x%x",
+            sTouch.uiX, sTouch.uiY, sTouch.uiZ1, sTouch.uiZ2, uiInvPressure ); 
+
+    //
+    // If pen pressure is so light that it is greater than the 'max' setting
+    // then we consider this to be a pen up.
+    //
+    if( uiInvPressure >= TS_LIGHT_INV_PRESSURE )
+    {
+        DPRINTK(" -- up \n");
+        bCurrentPenDown = 0;
+                ee93xx_ts_evt_add( 0, guiLastX, guiLastY, 0 );
+        TS_Hardware_Scan_Mode();
+        return;
+    }
+
+    //
+    // Hystheresis:
+    // If the pen pressure is hard enough to be less than the 'min' OR
+    // the pen is already down and is still less than the 'max'...
+    //
+    if( (uiInvPressure < TS_HEAVY_INV_PRESSURE) ||
+        ( bCurrentPenDown && (uiInvPressure < TS_LIGHT_INV_PRESSURE) )  )
+    {
+        if( bCurrentPenDown )
+        {
+            //
+            // If pen was previously down, check the difference between
+            // the last sample and this one... if the difference between 
+            // samples is too great, ignore the sample.
+            //
+            uiXDiff = abs(guiLastX - sTouch.uiX);
+            uiYDiff = abs(guiLastY - sTouch.uiY);
+            uiInvPressureDiff = abs(guiLastInvPressure - uiInvPressure);
+            
+            if( (uiXDiff < TS_MAX_VALID_XY_CHANGE) && (uiYDiff < TS_MAX_VALID_XY_CHANGE) &&
+                (uiInvPressureDiff < TS_MAX_VALID_PRESSURE_CHANGE) )
+            {
+                DPRINTK(" -- valid(two) \n");
+                bValidPoint = 1;
+            }
+            else
+            {
+                DPRINTK(" -- INvalid(two) \n");
+            }
+        }
+        else
+        {
+            DPRINTK(" -- valid \n");
+            bValidPoint = 1;
+        }
+        
+        /*
+         * If either the pen was put down or dragged make a note of it.
+         */
+        if( bValidPoint )
+        {
+            guiLastX = sTouch.uiX;
+            guiLastY = sTouch.uiY;
+            guiLastInvPressure = uiInvPressure;
+            bCurrentPenDown = 1;
+            ee93xx_ts_evt_add( 1, sTouch.uiX, sTouch.uiY, (0x7000000 /uiInvPressure) );
+        }
+
+        TS_Soft_Scan_Mode();
+        return;
+    }
+
+    DPRINTK(" -- fallout \n");
+    TS_Hardware_Scan_Mode();
+}
+
+static void ep93xx_ts_set_direct( unsigned int uiADCSwitch )
+{
+    unsigned int uiResult;
+    
+    //
+    // Set the switch settings in the direct register.
+    //
+    outl( 0xaa, TSSWLock );
+    outl( uiADCSwitch, TSDirect );
+
+    //
+    // Read and throw away the first sample.
+    //
+    do {
+        uiResult = inl(TSXYResult);
+    } while( !(uiResult & TSXYRESULT_SDR) );
+    
+}
+
+static unsigned int ADCGetData
+( 
+    unsigned int uiSamples, 
+    unsigned int uiMaxDiff 
+)
+{
+    unsigned int   uiResult, uiValue, uiCount, uiLowest, uiHighest, uiSum, uiAve;
+
+    do
+    {
+        //
+        //Initialize our values.
+        //
+        uiLowest        = 0xfffffff;
+        uiHighest       = 0;
+        uiSum           = 0;
+        
+        for( uiCount = 0 ; uiCount < uiSamples ; uiCount++ )
+        {
+            //
+            // Read the touch screen four more times and average.
+            //
+            do {
+                uiResult = inl(TSXYResult);
+            } while( !(uiResult & TSXYRESULT_SDR) );
+            
+            uiValue = (uiResult & TSXYRESULT_AD_MASK) >> TSXYRESULT_AD_SHIFT;
+            uiValue = ((uiValue >> 4) + ((1 + TSXYRESULT_X_MASK)>>1))  & TSXYRESULT_X_MASK; 
+
+            //
+            // Add up the values.
+            //
+            uiSum += uiValue;
+
+            //
+            // Get the lowest and highest values.
+            //
+            if( uiValue < uiLowest )
+            {
+                uiLowest = uiValue;
+            }
+            if( uiValue > uiHighest )
+            {
+                uiHighest = uiValue;
+            }
+        }
+
+    } while( (uiHighest - uiLowest) > uiMaxDiff );
+
+    //
+    // Calculate the Average value.
+    //
+    uiAve = uiSum / uiSamples;
+
+    return uiAve;    
+}
+
+//****************************************************************************
+// CalculateInvPressure
+//****************************************************************************
+// Is the Touch Valid.  Touch is not valid if the X or Y value is not 
+// in range and the pressure is not  enough.
+// 
+// Touch resistance can be measured by the following formula:
+//
+//          Rx * X *     Z2
+// Rtouch = --------- * (-- - 1)
+//           4096        Z1
+//
+// This is simplified in the ration of Rtouch to Rx.  The lower the value, the
+// higher the pressure.
+//
+//                     Z2
+// InvPressure =  X * (-- - 1)
+//                     Z1
+//
+static unsigned int CalculateInvPressure(void)
+{
+    unsigned int   uiInvPressure;
+
+    //
+    // Check to see if the point is valid.
+    //
+    if( sTouch.uiZ1 < MIN_Z1_VALUE )
+    {
+        uiInvPressure = 0x10000;
+    }
+
+    //
+    // Can omit the pressure calculation if you need to get rid of the division.
+    //
+    else
+    {
+        uiInvPressure = ((sTouch.uiX * sTouch.uiZ2) / sTouch.uiZ1) - sTouch.uiX;
+    }    
+
+    return uiInvPressure;
+}
+
+
+
+//****************************************************************************
+// TS_Hardware_Scan_Mode
+//****************************************************************************
+// Enables the ep93xx ts scanning engine so that when the pen goes down
+// we will get an interrupt.
+//